Dr.Aravindrao M Yadwad

Professor

Department of Mechanical Engineering

Email: amyadwad@nie.ac.in
Phone No: 9964470900
About Me:

Click for more info on Faculty Dr.Aravindrao M Yadwad

I am presently working as Professor in the Department of Mechanical Engineering & Dean (Student Welfare).  I obtained my Ph.D, M. Tech degrees from Visvesvaraya Technological University, Belagavi and MBA, PGDHRM from Karnataka State Open University-Mysuru and B.E. from Kuvempu University. I am having around 22 years of experience in Teaching, Research and Administration. I also served as Member of Academic Council [AC] during 2013-2015 and Deputy Dean [AA] during 2016-2019 for NIE, Mysuru. Under GoK deputation, I served the newly started Government Engineering College, as the HOD at Haveri during 2009-2010 and Chamarajanagar during 2007- 2009. I am serving as NBA coordinator of the Department and proud to secure highest marks among all the departments in the NBA accreditation during 2016. I am also serving as coordinator for NAAC.

My research interests are in the field of Production/Management/Energy Engineering and published more than 32 research papers in National and International Journals and Conferences. I have guided more than 20 UG and PG students and actively involved in Research. Five PhD Scholars are pursuing their doctoral studies under my supervision in the field of engineering and management studies from VTU-Belagavi.  One research scholar has been awarded the doctoral degree(PhD).  My research interests are mostly networking with research institutions like UBDT,BEC, BMS, AIT,MCE, GECs, CPRI, NAL, HAL, GT&TC, NDRF, JNTU(H/A), Apex Professional University(AP), NITs(K/W/P/T), etc. 

My excellent scientific and technical services are extended to the governance and growth through different administrative roles including member of the statutory Committees for SCVT-GOK, CFTRI- Mysuru, VTU, JNTU (H/A), AICTE- Expert Committee. I am a member of BOS and various functional committees of NIE, Mysuru and BEC, Bagalkot. I was a session chair in the 3rd International Conference on Advanced Production and Industrial Engineering organized by CAPIER, Delhi Technological University, at Hotel Caspia, New Delhi, during 5-6th OCT-2018.  My contributions in this field has been recognized and I have been made member to various scientific and technical committees for MISTE., ASME., MCI., C.Engg.  I have been awarded the “Fellow” of Institution of Engineers (India) Kolkata  during 2019 for my excellent academic and administration contributions.

  • B.E
  • M.Tech
  • Ph.D
  • PGDHRM
  • MBA
  1. Pragnya Pradeep, Dr. Aravindrao M. Yadwad2 et.al published “Influence of Various Sintering Processes on Cenosprhere added   Copper Composite”, Test Engineering and Management, January - February 2020 ISSN: 0193-4120 Page No. 5888 - 5894 (Published by: The Mattingley Publishing Co., Inc.)
  2. Mr. Mahesh G. Emmi1*, Dr. Aravindrao M. Yadwad2, Dr. Vinay V.Kuppast3 , Dr. Sampanna M4, Survey On Bagasse Cogeneration In Sugar Plants Of North Karnataka, International Journal of Engineering & Technology, 2018. 7 (4.5) (2018) 621-624, Website: www.sciencepubco.com/index.php/IJET
  3. Mahesh G. Emmi* , Dr. Aravindrao M. Yadwad, Dr. Vinay V.Kuppast “Performance evaluation of  bagasse unit in a sugar industry; A review” International Journal of Engineering Sciences & Research Technology[ IJESRT], ISSN: 2277-9655 [Emmi* et al., 6(6): June, 2017], Impact Factor: 4.116 , http: // www.ijesrt.com 
  4. Basavaraj Talikoti1, Dr. S. N. Kurbet2, Dr. V. V. Kuppast 3, Arvind M. Yadwad4 ”Modal analysis   of a 2-cylinder crankshaft using ANSYS” Int. Journal of Engineering Research and Application,  ISSN: 2248-9622, Vol. 5, Issue 12, (Part - 1) December 2015, pp.26-30www.ijera.com.
  5. Harsha D N, Aravind Rao Yadwad, Raghu, MD Nadeem M “Planning and design for commercialization of biogas bottling plant for Production of green and low-cost fuel with utilization of biomass resources” International Journal of Scientific & Engineering Research, Volume 6, Issue 1, January-2015 1297 ISSN 2229-5518 Available @ IJSER © 2015 http://www.ijser.org
  6. Harsha D. N, Aravind Rao Yadwad, Bheemsh Arya, Ravikumar S. “ Study of sustainable utility of biomass energy technologies for rural infrastructure and village power—opportunities by developing bio village model” International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163 | pISSN: 2321-7308 Volume 3, Issue-11, Nov.2014. Available @ http://www.ijret.org
  7. B.N.Nagendra Kumar, Dr.Arvind Rao M Yadwad, Shailesh P. S, Ramesh Babu.K, “Mechanism of laser assisted bending Fixture- an over view” International Journal of Mechanical Engineering and Robotics Research. ISSN 2278 – 0149, Vol. 3, No. 3, July, 2014.
  8. S.V.Doddaiah1 , Aravindrao.M.Yadwad2 S.B.Mallur3 , “Migrating From A Legacy Enterprise Resource Planning (ERP) System To A New ERP System: A Case Study” International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163 | pISSN: 2321-7308  Volume: 03 Special Issue: 03 | May-2014 | NCRIET-2014, Available @ http://www.ijret.org
  9. B.N.Nagendra Kumar, Dr.Arvind Rao M Yadwad ,Shailesh P. S, Ramesh Babu.K, “Conceptual design of laser assisted fixture for bending operation” International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163 | pISSN: 2321-7308Volume 3, Issue 5,May 2014.
  10. Vinay V. Kuppast, S. N. Kurbet, A. M. Yadawad, G. K. Patil, ‘The Study on Effect of Torque on Piston Lateral Motion’, International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163 | pISSN: 2321-7308 Volume: 02 Issue: 08 | Aug-2013
  11. Vinay V. Kuppast, S. N.Kurbet, Aravind Yadawad , Basavaraj Kambale, ‘Study on Influence of Temperature on I C Engine Vibration-A Finite Element Approach’, International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622, www.ijera.com, Vol. 1, Issue 4, pp.1893-1897
  12. A. M. Yadawad, Dr. S. N. Kurbet, V. V. Kuppast, B.B. Talikot, G. K. Patil, 'Assessment of Biomass Potential of a Rural Village for Power Generation', International Journal of Engineering & Technology (IJERT), ISSN: 2278-0181, Vol. 1 Issue 6, August - 2012.
  13. A. M. Yadwad, Dr. S. N. Kurbet, V. V. Kuppast, G. K. Patil, B. S. Talikoti, ' Biomass – An Alternate for Fossil Fuels?', International Journal of Engineering & Technology (IJERT), ISSN: 2278-0181, Vol. 1 Issue 6, August - 2012.
  14. A.M.Yadwad, Dr.S.N.Kurbet, V.V.Kuppast, B. Talikot, Yogesh K.K, 'Experimental Study on Suppression of Agglomeration of Particles in Fluidized Bed Combustion of Biomass', International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622, Vol. 1, Issue 4, pp.2051-2054
  15. Aravind M.Yadwad, Dr.S.N.Kurbet, Vinay V.Kuppast, B.S.Talikoti and G.K.Patil, 'Investigation of the feasibility of densification of biomass resources and their characterization', Global Journal of Mechanical Engineering and Computational Science (GJMECS), ISSN: 2249 – 3468, Vol. No.: 1, Issue No.: 4, 2011: Pp. 44-49.
  Conference Proceedings
  1. Pragnya Pradeep, Dr. Aravindrao M. Yadwad2 et.al(2018): “Mechanical Properties of Copper fly-ash Cenosphere   Composites produced by PM technique”  3rd International Conference on Advanced Production and Industrial Engineering   organized by CAPIER, Delhi Technological university, New Delhi, at  Hotel Caspia, New Delhi, during 5-6th  OCT-2018. 
  2. Mr.Ashwin Joshi, Dr.Aravindrao Yadwad “Experimental Investigation of External Burnishing Process Parameters   Surface on Cylindrical Work Piece Using Taguchi Approach”, 2nd ICETSET-2018 (International Conference on Emerging Trends in Science, Engineering and Technology), International Journal of Management Technology and Engineering, Vol.8, issue .ix, Sept 2018, pp.1868-1875.  #UGC approved journal no.47955 DOI: 16.10089.IJMTE.2018.V8I9.16.2219
  3. Mr. Mahesh G. Emmi1, Dr. Aravindrao M. Yadwad2 et.al (2017): “Cooling rate dependent structural studies of metastable binary ND80FE20 material” International Symposium on Advanced Materials for Engineering Applications (ISAMEA-2017) organized by TEQIP, NIE Mysuru during 24-25th March 2017.
  4. Mr. Mahesh G. Emmi1, Dr. Aravindrao M. Yadwad2 et.al (2017): “Phase Transformations and its influence on Magnetic Properties and Microstructure of Binary Nd80Fe20 by Ga Doping” International conference on “Advances in Mechanical Engineering Sciences [ICAMES-17] organized by IFERP and PESCE, Mandya during 21-22 April.2017.
  5. Basavaraj Talikoti1, Dr. Aravindrao M. Yadwad2 et.al (2016): “Harmonic Analysis of a two cylinder crankshaft using ANSYS” IEEE- International Conference on Inventive Computation Technologies (ICICT 2016) organized by IEEE-Coimbatore, Tamilnadu, India during  August 26 -27, 2016
  6. S.V.Doddaiah1, Aravindrao.M.Yadwad2 et.al (2014): “Customer Relationship Management [CRM] System; an Extended ERP [E2RP] System: A Case Study”  2nd International Conference on Current trends in Engineering and Management   [ICCTEM-2014], organized by VVCE, Mysore during 17-19, July 2014.
  7. S.V.Doddaiah1 , Aravindrao.M.Yadwad2 et.al (2014): “Changing from a Legacy Enterprise Resource Planning [ERP] System to a new ERP System: A Case Study” International Conference on Advance Engineering & Technology [ICAET 2014], Bangalore during 23rd March, 2014.
  8. Aravindrao.M.Yadwad et.al (2013): “Compacting of Biomass/Agro-waste for Energy Production” International conference on Advances in Mechanical and Computer Engineering(ICAMCE- 2013), Haryana during 18-19 Jan.2013.
  9. Aravindrao.M.Yadwad et.al (2012): “Power Generation by Fluidized Bed Combustion Systems Using Various Bio-mass as Fuel” International Conference on Advancements in Engineering & Management (RITS- ICAEM-2012) Hyderabad during 28-29 Feb. 2012.
              National Conference
  1. S.V.Doddaiah1 , Aravindrao.M.Yadwad2 et.al (2018): “Investigation and analysis of with and without ERP systems in Manufacturing and Automobile Organizations” National Conference on Skill development and Entrepreneurship organized by VTU and SGBIT, Belgavi during 27-28th April -2018.
  2. Giriraj K T1, Aravindrao.M.Yadwad2 (2017): “Design and Analysis of Circumferential Joint in Aircraft Structure” National Conference on Current developments and its applications in Mech. Engineering [NCCDAME-2017] organized by VTU and ISTE, at  KSIT, Bangalore during 10th -12th May  2017.
  3. Suraj J K1, Aravindrao.M.Yadwad2 (2017): “A review on design, analysis and life evaluation of composite leaf spring in truck.” National Conference on Current developments and its applications in Mech. Engineering [NCCDAME-2017] organized by VTU and ISTE, at  KSIT, Bangalore during 10th -12th May  2017.
  4. S.V.Doddaiah1 , Aravindrao.M.Yadwad2 et.al (2015): “The general concept about Enterprise Resource Planning (ERP) and EERP (ERP II)” National Conference [PRATIBIMB-2015] organized by TEQIP, NIE Mysuru on 10th April 2015.
  5. Aravindrao.M.Yadwad2 et.al (2011): “Co-Combustion of Coal & Biomass in CFB pilot plant’’. National Conference on Advances in Mechanical Engineering. [NCAME-2011], organized by SBCEC –Tamilnadu during March 23–24, 2011
  6. Aravindrao.M.Yadwad2 et.al (2011): “Technology for biomass handling and Combustion”, National conference on Energy Systems and energy Issues. [ESEI-2011], organized by Dept of Electrical & Mechanical Cluster Engg.  BMSCE, Bangalore during Feb. 18-19, 2011.
  7. Aravindrao.M.Yadwad2 et.al (2011): “Effect of feed pre-heating on briquetting of biomass”, National conference on Energy Systems and energy Issues. [ESEI-2011], organized by Dept of Electrical & Mechanical Cluster Engg.  BMSCE, Bangalore during Feb. 18-19, 2011.
  8. Aravindrao.M.Yadwad2 et.al (2008): “Effect of feed pre-heating on briquetting of biomass”, National conference on Energy Systems and energy Issues. [ETIME-2008], organized by Dept of Dept. of Mech. Engg.  BMSCE, Bangalore during Aug. 28-29, 2008.
  • Engineering Management & Entrepreneurship
  • Total Quality Management                         
  • Operations Management
  • Organizational Behaviour
  • Organizational Change & Development
  • Machine Drawing
  • CAED
  • Mechanical Engineering Science