Announcement:

Mohammed Ismail

Associate Professor

Department of Industrial and Production Engineering

Email: mdismail@nie.ac.in
Phone No: 9945353676
About Me:

Mohammed Ismail, Master in Engineering Management from the University of Mysore. Serving as Associate Professor in the Department of Industrial and Production Engineering. Presented International papers in Singapore and Dubai. Have more than 32 years of service and his areas of interests are Engineering Economics, Corporate Finance, Financial Management, Joining of Materials, Lean Manufacturing and Work Study and Ergonomics. Have published Journal papers in International Journals. Member of Institution of Engineers and Indian Society for Technical Education. Have conducted many workshops for UG and PG students
  • B.E in Industrial and Production Engineering from University of Mysore
  • M Tech in Engineering Management from University of Mysore.
Journal Publications
  • Ashvini C R and Mohammed Ismail (2019). “Ergonomics and Technical Aspects in Redesign of Material handling system”, IJRESM, 2(2), 244-246.
  • Ashvini C R and Mohammed Ismail (2018). “A Literature Review on “Bottle Neck Analysis, Continuous Improvement through Lean Tool and Alternative Layout to improve Productivity in Manufacturing Industry”, International Journal of Engineering Applied Sciences and Technology. 3(8), ISSN No. 2455-2143,40-48.
  • Shashank S P and Mohammed Ismail (2017). “Industry 4.0:A Review On Future Manufacturing”, IJSART. 3(6), 628-633
  • H V Ramnag and Mohammed Ismail (2016). “Process variability reduction of finish turning operation using statistical process control”, International journal for science and Advance research in technology, 2(5), 470-473
  • R Nikhil and Mohammed Ismail (2016). “Wear studies on thermal coatings”, International journal for scientific research & Development, 2(6), 68-71.
  • H V Ramnag and Mohammed Ismail (2016). “Process Capability Study of a Finish Grinding Operation”, International Journal of Darshan Institute on Engineering Research & Emerging Technologies. 5(1), 31-34
  • Rajesh A S, Dr. K M Subbaiah and Mohammed Ismail. (2015). “Improvement in material handling equipment- An Ergonomic case study”, International Journal on Recent Technologies In Mechanical And Electrical Engineering. 2(5), 115-117
  • Rajesh A S, Dr. K M Subbaiah, Mohammed Ismail and Basavaraju G. (2015). “Optimization of Transportation Cost in Supply Chain Management”, International Journal of Research Science and Management, 2(6), 43-47.
  • S Puneeth, Mohammed Ismail and B Suresha. (2014) “The Effect of Addition of Nano Fillers on Three Body Abrasive Wear Behavior of Unidirectional Glass Fiber Reinforced Epoxy Composites”, IJMET, 5(9), 81-85
  • Manjunath Kuruvinashetti, Mohammed Ismail and B.Suresha. (2014), “Two body abrasive wear behavior of short glass fiber and particulate filled polymethyl methacrylate composites”, IJMET, 5(9), 86-90.
  • Mohammed Ismail, B Suresha and Vinay (2013): “Parametric Appraisal of Erosion Behaviour of Organo-Modified Montmorillonite Filled Epoxy Hybrid Composites by Taguchi Approach”, Journal of Reinforced Plastics Composites, 32(21)
  • B Suresha, G Chandramohan, Siddaramaiah,Kunigal M Shivakumar and Mohammed Ismail, (2007): “Mechanical and Three-Body Abrasive Wear Behaviour of Three-Dimensional Glass Fabric Reinforced Vinyl Ester Composite”, Material Science & Engineering A 480(2008), 573-579
  Conference Proceedings  
  • Ashajyothi M, Mohammed Ismail, Vinutha P, K M Subbaiah, H N Divakar and NithinKundachira Subramani (2020). “Mechanically flexible and visibly transparent polymer based composite materials for UV protection application”, PESCE, Mandya ICMES-2020 Conference, 28, 29th February 2020.
  • Ashajyothi M, Mohammed Ismail, Vinutha P, K M Subbaiah, H N Divakar and NithinKundachira Subramani (2020). “Nanotechnology enabled Smart Fabrics: Development and Performance Evaluation”, Dayanandsagar College AMCES-2020 Conference,Bengaluru, 17, 18th January 2020.
  • Mohammed Ismail, Veena Patil and B Suresha. (2012) “Effect of Impingement Angle on Erosive Wear Behavior of Graphite Filled Polyamide66/Polypropylene Blend”, International Conference on Macro and supermolecular Architectures and material (MAM-2012). Coimbatore, Tamilnadu, 21-25 November 2012.
  • Mohammed Ismail, Vinay Kumar D and B Suresha. (2012) “Hybrid effect of Coconut Fibers on the Mechanical and Abrasive Wear Behaviour of Polymer Composites”, International Conference on Current Trends in Engineering and Management (ICCTEM). VidyavardhakaCollegeof Engineering, Mysore, 12-14 July 2012.
  • Mohammed Ismail, B Suresha and N Rajendra (2012) “Investigations On Mechanical And Erosive Wear Behaviour Of Cenosphere Filled Carbon-Epoxy Composites”, 7-8 Jan,2012, Dubai. ICMAME.
  • Mohammed Ismail, B Suresha and N Rajendra (2011) “Investigation of Solid Particle Erosion Behaviour of Carbon-Epoxy Composite with and without Fly Ash Cenosphere”, 13-16 Nov 2011, Hyderabad.
  • Mohammed Ismail, B Suresha and Veena Patil, (2011) “Erosion Wear Characteristics Of Fiber And Particulate Filled Glass Polymer Composites-A Review”, International Conference on recent advances in Mechanical Engineering (INCRAME), Dr. MGR University Chennai, 21-22 April 2011
  • Mohammed Ismail, B Suresha and Shruthi (2011) “Study of Study of Solid Particle Erosion Wear characteristics of Carbon Reinforced Polymer Composites- A Review”, International Conference on recent advances in Mechanical Engineering (INCRAME), Dr. MGR University Chennai, 21-22 April 2011
  • Mohammed Ismail, B Suresha and N Rajendra (2011) “Investigation of erosion rate on fly ash cenosphere filled carbon fabric reinforced epoxy composites with Taguchi approach”, International Conference on recent advances in Mechanical Engineering (INCRAME), Dr MGR University, Chennai, 21,22 April 2011
  • Mohammed Ismail, B Suresha and N Rajendra (2009) “Mechanical and erosive wear behaviour of particulate filled PA66/PP nanocomposites” Science City, Kolkatta, 16,17 Nov 2009
  • B Suresha, G Chandramohan, Siddaramaiah, Kunigal M Shivakumar and Mohammed Ismail (2007): “Mechanical and Three-Body Abrasive Wear Behaviour of Three-Dimensional Glass Fabric Reinforced Vinyl Ester Composite”, Material Science & Engineering A 480(2008), 573-579 ICMAT (2007), Suntec City, Singapore, 1st to 6th July 2007.
Undergraduate Program
  • Engineering Economics
  • Financial Management
  • Work Study and Ergonomics
Postgraduate Program
  • Joining of Materials
  • NonDestructive Testing
  • Lean Manufacturing Systems
  • Corporate Finance