Dr.H N Divakar

Professor

Department of Industrial and Production Engineering

Email: hndivakar@nie.ac.in
Phone No: 0821-2480475
About Me:

Bachelor of Engineering in Industrial and Production Engineering from Malnad College of Engineering, Hassan affiliated to Mysore University and being a GATE scholar obtainedM.Techdegree in Maintenance Engineering from SJCE, affiliated to Mysore University and Ph.D from Jadavpur Universtiy, Kolkata.

Presently working as a Professor in Industrial and Production Engineering Department, The National Institute of Engineering, Mysore and havenearly 25 years teaching experience.Member of BoS, BOE, and Doctorial committee for other technical institutions, Co-ordinator for Industrial and Production Engineers Association. Served as Nodal Officer (Finance) for TEQIP-II, NIE.Served as Head of the department in Department of Industrial & Production Engineering.Have published more than 25 technical papers  and also guided more than 20 M.Tech Projects and One M.SC Engineering and presently guiding 4 Research Scholars.Also, served as a faculty in reputed institutions like BMSCE, Bengaluru ,Dr. AIT, Bengaluru

Judge in the QCFI Bangaluru Chapter,Session chair in 2nd International conference on Advances in Mechanical Engineering Sciences(ICAMES-2K20) PESCE, Mandya.

    • B.E. in Industrial and Production Engineering (University of Mysuru)
    • MTech in Maintenance Engineering (University of Mysuru)
    • Ph.D.in Industrial coatings (Jadavpur University)
    Journal Publication
    1. Dr. H N Divakar, Asha Jyothi M, Vinutha P(2020):  "Mechanically flexible and visibly transparent polymer based composite materials for UV protection application" , paper published in web of science journal , 28th & 29th February  2020 paper published in web of science journal
    2. Dr. H N Divakar,  Yashwanth Kumar M K(2019):" Increasing Productivity of Inter Axle Drive Head  (Iad) Workstation In Drive Head Assembly process", International Journal For Trends in Engineering and Technology, May, 2019 Vol-36, Issue-1, ISSN - 2349 -9303
    3. Dr. H N Divakar, Harshith C N, Study and analysis of fuel system snags in HAWK aircraft International Journal of Advancements in Research and Technoogy (ISSN 2278-7763)  Paper ID AJ028858 - 2018
    4. Dr. H N Divakar, Harshith C N,(2018):" Study of fuel system in aircraft " International Journal of Science and Engineering Research (IJSER)  Paper ID 0118633 - 2018
    5. Dr. H N Divakar,(2017): “Kanban Efficiency Measurement System (KEMS)”, IJSART - Volume 3 Issue 7 –JULY 2017, 156-159
    6. Dr. H N Divakar, Deepak R (2017):"Enhancement of Supply Chain Efficiency By Extending Kanban System”, IJSART. Volume 3 Issue 6 - JUNE 2017
    7. Dr. H N Divakar, Chandrachood B(2015):" Process capability improvement in pumping element manufacturing" ,  International journal of research science and management, 2(6), June 2015, 25-29
    8. Dr. H N Divakar, Nithin M R (2015):"Reduction of rejection in diesel fuel injection pumping element" , International Journal of research science and management, 2(6). June 2015, 30-37,
    9. Dr. H N Divakar (2014):" Quality Improvement of Pumping element used in diesel fuel injection",  International Journal of Scientific and Research Publications, Volume 4, Issue 7, July 2014, 1-5
          Conference Proceedings   
      1. Dr. H N Divakar,  Asha Jyothi M, Vinutha P (2020):", Nanotechnology Enabled Smart Fabriics", International conference for Development and performance evaluation of thermally adaptive smart fabrics  paper published in AIP/Materials, 17th & 18th  January 2020
      2. Dr. H N Divakar,  Asha Jyothi M, Vinutha P,(2020),:"Development and Performance Evaluation"  International conference for Development and performance evaluation of thermally adaptive smart fabrics  paper published in AIP/Materials, 17th & 18th  January 2020
      3. Dr. H N Divakar,  Yashwanth Kumar M K (2019):"Increasing Productivity of Inter Axle Drive Head (Iad) Workstation In Drive Head Assembly", National conference For Trends in Engineering and Technology, May, 2019 Vol-36, Issue-1, ISSN - 2349 -9303
      4. Dr. H N Divakar, Yashwanth Kumar M K (2019):"Reduction of cycle time to increase productivity of IAD Workstation in Axle Assembly by adapting automation and 5s",  International conference on Recent Trends in Materials and Mechanical Engineering - July 2019 scoups indexed and UGC approved journal
      5. Dr. H N Divakar, Yashwanth Kumar M K (2019):"Increasing productivity by Automation and 5S for Inter Axle Drive Head Assembly",  Process Poster Presentation National Conference on Materials, Mechanics Manufacturing and Industrial Engineering April 2019
      6. Dr. H N Divakar, Sandesh M(2019):" Implementation of Lean Tools in Processing industry", International Conference on recent research emerging trends in Material and Mechanical Engineering ICRETMME-July 2019
      7. Dr. H N Divakar, Sandesh M(2019):" Implementation of Lean Tools in Processing industry ", National Conference on Materials, Mechanics, Manufacturing and Industrial Engineering April 2019
      8. Dr. H N Divakar, Mohammed Kashif M (2018):"Productity improvement of surface mount technology (SMT line by Analysing 4Ms" , National conference on Materials, Mechanics, Manufacturing and Industrial Engineering April 2018
      9. Dr. H N Divakar, Mohammed Kashif M (2018):" Application of Single Minute exchange of Dies Methodology in Surface Mount Technology Line to reduce setup Time,"  International Conference on Recent Engineering and Technology May 2018 International Journal of Science and Innovative Engineering & Technology
      10. Dr. H N Divakar, Harshith C N,(2018):" Study and analysis of fuel system snags in HAWK" aircraft National conference on Materials Mechnics, Manufacturing and Industrial Engineering April 2018
      11. Dr. H N Divakar, Sandesh M(2018):" Electric Hotspot Sensor Controlled Nitrogen Solenoid (ESNS) Engine" National Conference on Materials, Mechanics, Manufacturing and Industrial Engineering April 2018
      12. Dr. H N Divakar, Deepak R(2017): “Enhancement of Supply Chain Efficiency By Extending Kanban System”, Prathibimb 2017, April 2017
      13. H N Divakar, Prof. B. Ghosh (2004):"A Comparison on the Properties of Electroless and Electroplated NI-P Coating", Recent Advances in Mechanical Engineering RAME 2004, K.K. Wagh College of Engineering, Nasik Maharashtra January 16-17, 2004 P MD34-MD38
      14. Dr. H N Divakar, Kallesh S S,B Suresha and Krishna(2014):"The effect of impingement angle on erosion rates of polyacetol based composites", International conference on Current Trends in Engineering and Management ICCTEM-2014,17th – 19th, July 2014
      15. Dr. H N Divakar,  Kiran Lakkam (2013):"Study of Mechanical properties AA8011 processed by CRCS method ", International Conference on Advanced materials, manufacturing, management and thermal science, SIT, Tumkur, May 2013
      16. H N Divakar, Sandya Value (2011):"stream mapping for the effective utilization of resource carried out at one of the tyre manufacturing industries",  National conference Recent Advancement in Engineering & Technology March 2011
      17. H N Divakar, Prof. B. Ghosh(2005):" Experimental Analysis of Electroplating & Electroless Coating of Ni-P and their properties", Recent trends in Design and Manufacturing Technologies-RTDMT 2005, Kumaraguru College of Technology Coimbatore Tamilnadu INDIA March 17-18, 2005
      18. H N Divakar, Prof. B. Ghosh(2005):"  Statistical Analysis Method for Predicting the Deposition Rate of Electroless Ni-P Coating ", Recent trends in design and manufacturing technologies-RTDMT 2005, Kumaraguru College of Technology Coimbatore Tamilnadu, INDIA. March 17-18, 2005
      19. H N Divakar, Prof. B. Ghosh (2005):" Electroless Coating an option for corrosion resistance for Industrial Application ", ‘Product Development with Mechatronics Systems for Global quality’ –PMGQ 2005, Thiagarajar Collegeof Engineering Madurai – Tamilnadu, INDIA May 2-3, 2005 P433-438
      20. H N Divakar, Prof. B. Ghosh (2005):" Surface Roughness of Electroless Ni-P and Ni-B Coating Using Surtronic 3+ Roughness Checker, Product Development with Mechatronic Systems for Global quality’ – PMGQ 2005, Thiagarajar College of Engineering Madurai – Tamilnadu, INDIA, May 2-3 2005 P439-444
      21. H N Divakar, Prof. B. Ghosh(2004):"  Multilayer Coating: An Option For Hard Coating, Recent Advances in Mechanical Engineering” –RAME 2004, K.K. Wagh College of Engineering Nasik, Maharashtra January 16-17, 2004 MD 61-MD64
         
      Undergraduate Program
        • CAD/CAM
        • Statistical Quality Control 
        • Computer integrated manufacturing
        • Computer aided machine design
        • Value Engineering
        • Management Information System
        • Foundry Technology
          Postgraduate Program
          • Automation, Production Systems
          • Lean Manufacturing System
          • Finite Element Method