Prasanta Kumar Samal

Assistant Professor

Department of Mechanical Engineering

Email: prasanta@nie.ac.in
Phone No: 9535144563
About Me:

I completed my masters in Mechanical Engineering from Indian Institute of Science, Bangalore in year 2011. I served Mahindra & Mahindra Automotive and Farm Equipment Sector (AFS), at Mahindra Research Valey, the R&D Center, Chennai, as Deputy Manager for one year in the CAE Department. Because of my passion for educating, I shifted from Industry to academics in 2012. After two years of teaching at T. John Institute of technology, Bangalore, I joined The National Institute of Engineering, Mysuru in 2014 as Assistant Professor (PG in Machine Design).  My research interests include Finite Element Analyses, Experimental Modal Analysis, Dynamics of Machine Elements, Design and Development of Mechanisms, Structural Optimization. I am sound in MATLAB, LabVIEW, Modeling and Finite Element Analysis Packages. This helps me to do research and guide the scholars to do their research.

  • B.Tech. (VSSUT, Burla)
  • ME (IISc, Bangalore)
Journal Publication
  1. Amar Chandra C, Prasanta Kumar Samal, “Experimental determination of mode shapes of beams by roving impact test”, MaterialsToday Proceedings, available online 2020.
  2. Shrinivas Hebbar A, Shrinidhi D Kulal, Tajmul Pasha, Prasanta Kumar Samal, K Gourav,  “Numerical and Experimental Investigation of Vibration Isolation of Three Storied Building Structure using Tuned Mass Damper”, International Journal of Recent Technology and Engineering (IJRTE), Vol. 8 (2019), 141-149.
  3. H. R. Kemparaju, Prasanta Kumar Samal, “Experimental Investigations on Free Vibration of Plates”, Journal of Testing and Evaluation, Vol. 47 / No. 4 / 2019, 2750-276.
  4. R. K. Sabat, P. K. Samal, Muzzamil Ahamed S, “Effect of strain path on the evolution of microstructure, texture and tensile properties of WE43 alloy”, Materials Science and Engineering A, 715 (2018) 348-358.
  5. P. K. Samal, PK Malik, A Babu, GC Shanthakumar, “Fabrication and Experimentation of a Cantilever Beam Based Piezoelectric Actuator and Sensor for Vibration Energy Harvesting”, Applied Mechanics & Materials, 592-594 (2014), 2297-2302
  6. Prasanta Kumar Samal, Pramod Kumar Mallik, Premanjan Sethy, Rudra Pratap, “Modelling, Fabrication and Characterization of a Piezoelectric Vibration Energy Harvester”, International Journal of Engineering Research & Technology, 3 (2014), 397-402
  7. Prasanta Kumar Samal, “Design, Fabrication and Characterization of a Piezoelectric Ultrasonic Transducer”, International Journal of Mechatronics and Manufacturing Technology, Vol-1, Issue-2 (2016), pg13
  8. Kemparaju HR, Prasanta Kumar Samal, “Detailed Numerical Study of the Free Vibration Analysis of Beams”, Advances in Civil and Structural Engineering, Vol-2, Issue-2 (2017), 39-47
  9. Vinodkumar, Prasanta Kumar Samal, Tajamul Pasha, “Design and Analysis of LPG Weighing Machine for Household Application”, Journal of Petroleum and Petrochemical Engineering, Vol-1, Issue-1 (2016)
  10. Dushyanth Kumar M. V., Prasanta Kumar Samal, “Design and Analysis of Gravity Roller Conveyor System for Moped Engine Assembly Line, Vol-2, Issue-3 (2017), 1-6
International Conference
  1. Prasanta Kumar Samal, B Murali, Tajmul Pasha, “Finite Element Analysis of Connecting Rod of IC Engine”, International Conference on Mechatronics and Mechanical Engineering (ICMME 2015) ,  Singapore, MATEC Web of Conferences.
  2. Pramod Kumar Malik, Prasanta Kumar Samal, Amulya Ratna Swain, “Jacobian Based Kinematic and Static Analysis of Over-Constrained Mechanisms with Prismatic and Revolute Joints”, International Conference on Mechanism and machines, IIT, Roorkey (2013).
  3. Prasanta Kumar Samal, Murali B, “Design and Finite Element Analysis of Resilient Wheel with Honeycomb Structure”. International Conference on Mechanical, civil, Electronics & Communication and Computer Science Engineering, Bangalore (2016).
  4. Prasanta Kumar Samal, Puneeth Kumar S, “Experimental Stress Analysis and Finite Element Analysis Approach to Study the Behavior of Shaft under Combined Loading”, International Symposium on Advanced Materials for Engineering Applications, Mysore (2017).
  5. Ajith Kumar, Prasanta Kumar Samal, “Design And Development Of In-Situ Compression Set Up”, International Symposium on Advanced Materials for Engineering Applications, Mysore (2017).
  6. Shrinivas Hebbar A, Shrinidhi D Kulal, Tajmul Pasha, Prasanta Kumar Samal, K Gourav,  “Numerical and Experimental Investigation of Vibration Isolation of Three Storied Building Structure using Tuned Mass Damper”, International Conference on Advances in Mechanical Engineering & Management (ICAMEM – 2019) organized by the Dept. of Mech. Engg., Vidyavardhaka College of Engineering, Mysuru during March 22 – 23, 2019.
  7. Rohith N,  Prasanta Kumar Samal, Charanaraja Naik, “Experimental investigation on free vibration analysis of composite plates”, International Conference on Advances in Mechanical Engineering & Management (ICAMEM – 2019) organized by the Dept. of Mech. Engg.,  Vidyavardhaka College of Engineering, Mysuru during March 22 – 23, 2019.
  8. Ejaz Ahamed, Prasanta Kumar Samal, Suresh B.S, Kemparaju. H.R, “Artificial Neural Network based Prediction of Cutting Parameters from Tool Vibration and Forces”, International Conference on Emerging Trends for Smart Grid Automation and Industry 4.0 (ICETSGAI4.0 2019)  organized by Birla Institute of Technology, Mesra, Ranchi during 5th December 2019 to 7thDec 2019.
  9. Amar Chandra C, Prasanta Kumar Samal, “Experimental Determination of Mode Shapes of Beams by Roving Impact Test”, 2nd International Mechanical Engineering Congress (IMEC) – 2019 organized by National Institute of Technology, Tiruchirappalli during 29th November 2019 to 1st Dec 2019.
National Conference Papers
  1. Shivaraj Dharennavar, Prasanta Kumar Samal, B.Suresh, " Design and Fabrication of Fixture for Shear Testing of Composite Materials in UTM", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
  2. Niranjan A S, Prasanta Kumar Samal, " Design and Analysis of the Main Assembly Jig for a Multirole Civilian Aircraft’s Main Door" , National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
  3. Prasanta Kumar Samal, Hulagappa B, Sujit Sali, Tajamul Pasha " Effects of Fillers on Mechanical Properties and Fracture Toughness of E-Glass Fibre Epoxy Composite ", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
  4. Tajamul Pasha, Arjun V P., Prasanta Kumar Samal, " Use of Drill Jig in Aircraft Assembly Process", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
  5. Gowda Harish Rama, Prasanta Kumar Samal, " Static Stiffness Analysis of Spindle Assembly of CNC Lathe Machine", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
  6. Lakshmikantha K S, Murali B, Prasanta Kumar Samal, " Design of Wheels and Chassis for Throwable Robot used for 3D Mapping", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
  7. Vinodkumar, Tajamul Pasha, Prasanta Kumar Samal, " Concept Generation and Selection of LPG Weighing Machine for Household Application", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
  • Finite Element Methods
  • Computer Aided Engineering Drawing
  • Machine Drawing, Control Engineering
  • Experimental Stress Analysis
  • Mechanism Design