Innovative solutions, significant publications, and important patents – the IPE Department faculty has a great many accomplishments to their credit.

International Publications
  1. Vadivel S.M and Sequeria A. H., Deeksha Sanjay Shetty, Sunil Kumar Jauhar (2020) “Enhancement of mail operational performance of India post facility layout selection using AHP” International Journal of System Assurance Engineering and Management, Springer publishers. 11(2),pp.494-505.DOI: https://doi.org/10.1007/s13198-019-00854-1 (Scopus Indexed).
  2. Vadivel S.M., Sequeria A. H., Sunil Kumar Jauhar, Vimal Kumar (2020) “Sustainable postal service design: Integrating quality function deployment from the customers perspective” International Journal of System Assurance Engineering and Management, Springer publishers.11(2),261-273. DOI:https://doi.org/10.1007/s13198-019-00906-6 (Scopus Indexed).
  3. Accepted: Vadivel S.M and Sequeria A. H. (2018) “Enhancing the Operational Performance of Mail Processing Facility Layout selection using Multi - Criteria Decision Making Methods” International Journal of Service and Operations Management, Inderscience publishers. (Scopus Indexed).DOI: 10.1504/IJSOM.2020.10018620.
  4. Vadivel S.M., and Sequeria A. H. (2019) “A hybrid method for the selection of facility layout using experimental design and grey relational analysis: A case study, International Journal of Hybrid Intelligent Systems (IJHIS), IOS Press publishers,1-10, DOI: 10.3233/HIS-190264.
  5. Vadivel S.M and Sequeria A. H. (2017) “Lean service application towards operational performance in Indian Postal Mailing Service – A Conceptual Model, International Journal of Engineering Technology Science and Research, 4,(10),pp. 24 – 28.
National Publications 
  1. Vadivel S M and K.S.Amirthagedeswaran March 2013, Performance Evaluation in facility layouts design using Analytical Hierarchy Process, Indian institute of Industrial Engineering journal, Vol.VI & Issue no.3 Page 24-28  Link: http://iitm.academia.edu/VadivelSm
  1. Vadivel S M and K.S.Amirthagedeswaran, August 2014,Design improvement in facility layout through non-traditional algorithms, Indian institute of Industrial Engineering journal. Vol. IX, Issue no.6 Page 20- 24
  2. Vadivel S M and R.Baskaran, May 2015,  Forecasting demand on each stage in public transportation - An empirical analysis, Vol. VIII, Issue.no.7, Page 32-39
  3. Varunkumar.S, Vadivel S M, Varadharajan.P,Vandhiyan.P,December 2016,Design and Fabrication of Drilling Vice, Indian institute of Industrial Engineering journal. Vol. IX, Issue no.12 Page 40- 45
  4. Rajeswari, Amirthagedeswaran, Vadivel S M,  Dec 2014, Investigation of machining parameters in end milling of AISI4340 steel, Indian institute of Industrial Engineering journal. Vol. VII, Page 14- 17
  5. S.Sasikumar, Gopi, Vadivel S M, November 2016, Effect of process parameters on joint strength in FSW - Aluminium Alloy 6082 T6, Vol.IX & Issue.No.11, Page 14 – 19
    International Conferences
    1. Vadivel S.M, Venkatesh Balasubramanian,Mervin Alexender, 2014, “Lean Ergonomics  in an Indian postal service industry – A case study”, HWWE 2014,IIT Guwahathi, McGraw hill publications, Pg.no.711-714 .
    2. Vadivel S.M, Baskaran.R,Dhanabalan.B,2016,”Performance evaluation of Omni Bus transport system in Tamil nadu using Analytical hierarchy process, CARPET16,Bharath Nikethan Engineering College,Theni, pg.no.27
    3. Vadivel S.M, Robert Rajkumar.S,2016,” Implementing lean ergonomics and performance evaluation of facility layouts in Indian postal Manual sorting centre using AHP – an Empirical study, CARPET16,Bharath Nikethan Engineering College, Theni, pg.no.35
    4. Vadivel S.M and  Sunil D.Souza,2016, ”Lean Ergonomics Evaluation of  Indian postal Manual sorting facility layouts  – a Empirical study, COSMAR16, IISc.Bangalore, pg.no.17.
    5. Vadivel S.M and Sequeira A.H., “An operational performance of Indian Postal Service using Lean manufacturing approach A conceptual framework”, International conference on Strategies in volatile and uncertain environment for emerging markets , Department of Management Studies, IIT Delhi, 14-15 July, 2017.Pg.no.20.
    6. Vadivel S.M and Sequeira A.H., “Lean service application towards operational performance in  Indian postal Mailing service –A conceptual model”, 4th International conference on Advancement in Engineering, Applied Science and Management (ICAEASM-2017), Centre for Development of Advanced Computing (C-DAC), Juhu, Mumbai, 8th October 2017.
    7. Vadivel S.M and Sequeira A.H., “Indian postal service operational performance by lean sustainability approach”, ATHENAEUM 18, VIII International conference on Contemporary Management Research, Bharathidasan Institute of Management (BIM), IIT Madras, 9th and 10th  February 2018. Pg.no.4
    8. Vadivel S.M and Sequeira A.H., “Indian postal manual sorting facilities layout selection using AHP methodology”, RCOSCM 18, Research conference on Operationas and Supply Chain Management, Symbiosis Institute of Operations Management, Nashik, 17th February 2018. Pg.no.35-47.
    9. Vadivel S.M and Sequeira A.H., “Green Postal Service Design: Integrating quality function deployment from customer’s perspectives, 2nd International Conference on Innovative Research in Science,Technology and Management (ICIRSTM 18), National university of Singapore (NUS), Singapore, 29-30,September 2018. Pg.no.31.
    10. Vadivel S.M and Sequeira A.H., “A Novel Approach for Operational Performance Based Mail Sorting Facility Layout selection using  Grey Relational Analysis: A Case on India Speed Post Service Industry”, 18th International Conference on Design Intelligent Systems Design and Applications, VIT University, Vellore, Tamil nadu, 6-8,December 2018.
    11. Vadivel S.M, Sequeira A.H.S K Jauhar, “Metaheuristic for Optimizing the India Speed Post Facility Layout Design and Operational Performance Based Sorting Layout Selection using DEA Method”, 10th World Congress on Nature and Biologically Inspired computing, VIT University, Vellore, Tamil nadu, 6-8,December 2018.
    12. Vadivel S.M and Sequeira A.H., “Evaluating and Ranking the operational performance Mail Processing Facilities layout using Grey Relational Analysis”, 12 Annual International Conference of the Society of Operations Management, IIM Kozhikode, 20-22,December 2018. Pg.no.16.
    13. Vadivel S.M and Sequeira A.H., “Implementing lean service tools and techniques in India speed post service – A case study”, 12 Annual International Conference of the Society of Operations Management, IIM Kozhikode, 20-22,December 2018. Pg.no.17.
    14. Vadivel S.M and Sequeira A.H., “Value Stream Mapping Simulation (VSM-Sim): methodology to design the lean service systems in India Post Service Industry – A case study”, 8th International Engineering Symposium (IES2019) at Kumamoto University, Japan, March 13-15, 2019.pp-640-645.
    15. Vadivel S.M., Sequeria A.H., Sunil Kumar Jauhar, Baskaran.R “Application of multi-criteria decision-making approach for the evaluation of Tamilnadu private bus companies from passengers’ perspective”, 4th international conference on soft computing: Theories and applications (SoCTA2019) at NIT Patna, India. December 27-29, December 2019.
    16. Vadivel S.M., Sequeria A.H., Sunil Kumar Jauhar, Amirthagadeswaran K.S. “CNC Machine Shop Floor Facility Layout Design using Genetic Algorithms”, 4th international conference on soft computing: Theories and applications (SoCTA2019) at NIT Patna, India. December 27-29, December 2019.
    17. Vadivel S.M and Sequeira A.H., “The impact of lean service practices, workplace environment practices, and social practices on the operational performance in India Post service industry”, 7th International Business Analytics and Intelligence Conference (DCAL2019) at IIM Bangalore, India, December 05-07, 2019.
      • Bharath T S, Dr.Shamprasad M S, Dr. K R Prakash (2019) : “Design and development of automated & programmable testing rig for sensor characterization”,  National conference at GSSS, Mysuru
      Journal Publication
      1. Shailesh Rao A, Alam Radhika (2019), “ Evaluating Machining Performance of AISI 1014 steel using Gingelly Oil as Cutting Fluid”, Australian Journal of Mechanical Engineering, Taylor and Francis Publication, https://doi.org/ 10.1080/ 14484846.2019.1636517
      2. Shailesh Rao A, H Nayak, Krishnamurty N, (2018), “Studies on Plasma Sprayed Thermal Barrier Coating with Increase in Coating Thickness”, Tribology in Industry, 40, 3, 420-432
      3. ShaileshRao A, YuvarajaNaik, (2017)  “Effect of the Metal Transport on the Mechanical Properties of Al-2Si alloys processed through Friction Stir Welding Processes”, Metallurgical and Materials Transactions B, 48,3, 1771-1781
      4. ShaileshRao A, Mahantesh Tattimani, (2018) “Effect of rotational speed in vertical centrifugal casting on the wear properties of obtained aluminum tubes” ISTM Transaction of Mechanical Engineering, Springer Verlag Publication, Accepted for Publication
      5. ShaileshRao A, YuvarajaNaik, (2018) “Understanding the Effect of Multiple Traverse Feed during Friction Stir Welding Processes”, Archives of Metallurgy and Materials, 63,1,203-210
      6. ShaileshRao A, YuvarajaNaik, (2017), “Comparison  on Appearance, Microstructure and Tensile properties during Friction Stir Welding Processes of Al-Si alloys”, Physics of Metals and Metallography, Springer verlag Publication, 118, 7,  716-722
      7. Chetan KS, ShaileshRao A, (2017), “Investigation of  Particle Segregation and Solidification Time in FGM’s Using Centrifuge Casting Techniques”, Applied Mechanics and Materials, 766, 956-961
      8. ShaileshRao A, Mahantesh Tattimani (2015), “Understanding Melt Flow Behavior for Al-Si Alloys Processed Through Vertical Centrifugal Casting”, Journal of Materials and Manufacturing Processes, Taylor and Francis, 30(11), 1305-1311
      9. ShaileshRao A, Mahantesh Tattimani, (2015) “Effect of melt flow with various rotational speeds in vertical centrifugal casting process on appearance, microstructure and hardness behaviour in Al-2Si alloy”, Metallurgical and Materials Transactions B: 46, 2, 793-799
      10. Jyothi P.N, ShaileshRao A, (2014),“Influence of Refiner in ZA-12 alloys during Centrifugal Casting Process”, Journal of Materials, Springer Verlag Publication, 66,. 5,  720-725
      11. ShaileshRao A, Mukunda P G, Shrikantha S Rao, (2011) “Inference of Optimal Speed for Sound Centrifugal Casting of Al-12Si Alloys”, Journal of Materials,63,.5, 19-23
      12. ShaileshRao A, P G Mukunda, Shrikantha S Rao, (2010),  “Influence of Rotational speed of Centrifugal Casting Process on Appearance, Microstructure and Sliding wear behaviour of Al-2Si cast alloy” Metals and Materials International, Springer Verlag Publication,. 16,. 1 ,  137-143
      13. Shailesh Rao A, P G Mukunda, Shrikantha S Rao, (2010), “Influence of teeming temperature of molten metal of Tin during centrifugal casting” IJCMR, 23, , 51-54
      14. ShaileshRao A, P G Mukunda, Shrikantha S Rao, (2008), “Influence of Fluid Flow Behaviour in Centrifugal Casting”, Journal of Advanced Fluid Mechanics 2,  49-53
      15. ShaileshRao A, P G Mukunda, Shrikantha S Rao, (2009), “Influence of Rotational Speed during Centrifugally Cast on Sliding Wear Behaviour of Al-2Si Alloy” Frontiers of Materials Science of China, Springer Verlag Publication,  3,  339-343
      16. ShaileshRao A, P G Mukunda, Shrikantha S Rao, (2009), “Inference of Optimal Speed for Sound Centrifugal Casting of Tin” Canadian Metallurgy Quarterly and Material Science, 48, 2, 157-166 
                International Conference
      1. Mohan Kumar, Shailesh Rao A, (2016), “A Study on the effect of  crack stopper for  enhanced damage tolerance behaviour of a fuselage  stiffened panel” , organized by First international  Structural Integrity conference SICE 2016
      2. Shailesh Rao, Jyothi P N, et.al., (2014), Processing of ZA-27 Based MMC Reinforced with Al2O3 by Centrifugal Casting”, organized by AMRE 2014, 25-26, Zurich, Switzerland
      3. P.N. Jyothi, Shailesh Rao, et.al, (2013),  “Influence of Refiner Aluminum Titanium Boride on the ZA alloys Processed through Centrifugal Casting” organized by ASME 2013 International Mechanical Engineering Congress and Exposition,IMECE2013,  San Diego, California, US
      4. Shailesh Rao A, Shrikantha S Rao, Mukunda P G, (2010), “Influence of Rotational speed during centrifugally cast on sliding wear behavior of Al-12Si Alloy” organized by ADM 2010, Nottingham Trent University, Nottingham
      5. Mukunda P. G, ShaileshRao A, Madhusudhan, Narendranath S, Mohankumar G C, (2009), “Understanding of Fluid Behavior in Partially Filled Rotating Cylinder”, organized by New Advances in Thermal, Design, Materials and Manufacturing Engineering (NATDMME-2009),Malnad College of Engineering, Hassan
      6.  Mukunda P G, Shailesh Rao A, Madhusudhan, Shrikantha S Rao, Narendranath S, G. C. Mohan Kumar, (2009), “Study of fluid behavior in Centrifugal Casting”, National conference on recent Trends in Manufacturing Technology (RTMT-09),  CEGC, Anna University Chennai
      7. Shailesh Rao A, Mukunda PG, Shrikantha S Rao, (2008), “Initial experiments of fluid flow behaviour of Al-Si alloys in centrifugal casting”, organized by  ICMMM, 2008, DrMahalingam College of Engineering, Pollachi
      8. Shailesh Rao A, Mukunda PG, Shrikantha S Rao (2007), “Understanding fluid flow behavior in centrifugal casting” organized by Tohoku University, Sedai, Japan
      Journal Publications
      • International Journal
       
      1. Doddalli Rudrappa S, Yellampalli Srinivasachar Varadarajan.(2020):" Significance of the type of reinforcement on the physicomechanical behavior of short glass fiber and short carbon fiber-reinforced polypropylene composites ". Engineering Reports. 2020;e12098.
      2. Jangam Ramesh, Dr Mohan Ram M, Dr Varadarajan Y S (2019): "Sustainable value addition to Micro, Small, and Medium Enterprises (MSMEs) in India: A review of Industry 4.0" , International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST), ISSN (ONLINE):2456-5717Vol.5, Issue.7, July 2019
      3. Siddharth Suhas Revankar,Ramesh S Rao, Y S Varadarajan(2017): “Study of Tungsten Carbide Behavior in Hot Forging Application”, International Journal of Innovative Research in Advanced Engineering, Volume 4 page 180-187, April 2017
      4. Anudeep Rao,P, Ramesh S Rao, Y S Varadarajan(2017):"Study of Thermal Stresses in High Temperature Brazing of Carbide to Steel", International Journal of Innovative Research in Advanced Engineering (IJIRAE) ISSN: 2349-2163 Issue 04, Volume 4 (April 2017), 114-117
      5. Varun nag, Y S Varadarajan.(2016):" Improving the logistic efficiency by reducing of the plastic bin", Published in  IJSART,  Vol 2,5,2016, 660-664
      6. Rakesh M, Y S Varadarajan, Basavaraju G(2016) :"Enhancing the logistic performance in Manufacturing Industry", International Journal for Science and Advance Research in Technology , Vol 2, issue 6 in June 2016
      7. Shiva kumar G N Y S Varadarajan, Basavaraju G(2015): "Implementation of Pull System using KANBAN ", International Journal of Research Science & Management, vol2, issue2 6, pg 48-53, May 2015
      8. Raveen John, Y S Varadarajan , Paul Pereira (2015):"To Arrive at solution for Profile distortion problem encountered during heat treatment process of gear manufacturing using root cause analysis" , International journal of innovative research in science, engineering and technology, vol 4, issue 5, May 2015
      9. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2013): " Analysis of abrasive wear behavior of carbon fabric reinforced epoxy composite using Taguchi method ", International journal of Advanced Material Science, ISSN 2231-1211 Vol 4,No. 3 2013, PP211-223.
      10. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2013): "Investigation of the abrasive wear behavior of graphite filled carbon fabric reinforced epoxy composite –A Taguchi method", International journal of mechanical engineering and Technology (IJMET),  Vol 4,Issue 1, Jan-Feb 2013, PP 101-108
      11. K.M.Subbaya, B Suresha, N Rajendra, Y S Varadarajan. (2012):"Taguchi Approach for  Characterization of Three-Body Abrasive Wear of Carbon-Epoxy Composite With and Without SiC filler". Composite interfaces.19, 297-311.
      12. K.M.Subbaya, B Suresha, N Rajendra, Y. S Varadarajan. (2012):" Multiple response optimization of Three-body abrasive wear behaviour of graphite filled carbon-epoxy composites using grey-based Taguchi Approach", Journal of Minerals & Materials characterization and engineering, 11,876-884
      13. K.M.Subbaya, B Suresha, N Rajendra, Y S Varadarajan. (2012) :"Grey-based Taguchi approach for wear assessment of SiC filled carbon-epoxy composites", Journal of Materials and Design, Elsevier, Vol 41, P124-130. ISSN-0261 3069
      14. Rashmi S N, Subbaya K M , Y S Varadarajan.(2012):" Grey based Taguchi approach for wear assessment of SiC filled glass fabric reinforced epoxy composites:, International journal of business review and manufacturing management (IJBRMN) Vol.2, No.1, pp12-17,ril 2012: ISSN 2231-5349.
      15. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra,(2011): "Mechanical Behaviour of Graphite filled and unfilled carbon epoxy composites, CiiT,  International Journal of Automation and Autonomous Systems,3(8), 2011 ,368-375.
        National Journal
      • Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2014): "Artificial Neural network   approach for the prediction of abrasive wear behavior of carbon fabric reinforced epoxy composite",  Indian journal of Engineering and Material Sciences , Vol 21, Feb 2014, PP 16-22
        Conference Proceedings
      • International Conference
       
      1. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2015)::" Erosive wear behavior of carbon fiber reinforced epoxy composite ",4th International conference on materials processing and characterization.2015
      2. Tejappanavara Raghavendra, Y.S.Varadarajan (2013): “A study on wear behavior of SiC filler filled glass fiber reinforced epoxy composites”,  International Conference on advanced Materials, Manufacturing, Management &Thermal Sciences AMMMT-2013.May, 03,04, ISBN-13 978-81-926304-0-3
      3. Abdul  Raheem, K.M.Subbaya, Y.S.Varadarajan(2013): “Optimization of Tribological properties of carbon fibre reinforced epoxy composites flled with nano and micro fillers”, International Conference on advanced Materials, Manufacturing, Management & Thermal Sciences AMMMT-2013.May, 03,04, ISBN-13 978-81-926304-0-3
      4. Santosh Hiremath, M.S.Shamprasad, Y.S.Varadarajan(2013: “Optimization of Tribological properties of carbon fiber reinforced epoxy composites filled with nano and micro hybrid fillers (Al2O3  +  SiC)”, International Conference on advanced Materials, Manufacturing, Management & Thermal Sciences AMMMT-2013.May, 03,04, ISBN-13 978-81-926304-0-3
      5. Anjan B N, Y.S.Varadarajan (2013): “Study of Tribological properties of micro/nano alumina filled glass fiber reinforced epoxy composites”, International Conference on advanced Materials, Manufacturing, Management & Thermal Sciences AMMMT-2013.May, 03,04, ISBN-13 978-81-926304-0-3.
      6. K.M.Subbaya, B Suresha, N Rajendra, Y S Varadarajan. (2012) :"Grey-based Taguchi approach for wear assessment of SiC filled carbon-epoxy composites", Journal of Materials and Design, Elsevier, Vol 41, P124-130. ISSN-0261 3069.
      7. K.M.Subbaya, B Suresha, N Rajendra, Y S Varadarajan. (2012):" Taguchi Approach for  Characterization of Three-Body Abrasive Wear of Carbon-Epoxy Composite With and Without SiC filler.:, Composite interfaces.19, 297-311.
      8. K.M.Subbaya, B Suresha, N Rajendra, Y. S Varadarajan. (2012) :"Multiple response optimization of Three-body abrasive wear behaviour of graphite filled carbon-epoxy composites using grey-based Taguchi Approach" , Journal of Minerals & Materials characterization and engineering, 11,876-884.
      9. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2012):" Effect of Graphite Filler on Tribological Behavior of Carbon Epoxy Composite – A Taguchi Approach", International conference on emerging trends in Engineering, May 15th and 16th 2012
      10. Rashmi S N, Subbaya K M , Y S Varadarajan. (2012):" A Gray-based Taguchi approach for wear assessment of SiO2 Filled Glass Fabric Reinforced epoxy composite." International conference on Recent advances in Mechanical Engineering (INCRAME-2012), 19-20 April 2012.
      11. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2011):" Influence of Graphite Filler on the Mechanical Properties of Carbon Fabric Reinforced Epoxy Composite", International conference on Advances in Engineering and Technology,27 & 28 May,2011,EGS Pillay,Engineering College,Nagapattianam,Tamilnadu.
      12. Ravichandran G Y S Varadarajan, B Suresha (2011) :"Effect of Micro-filler Additions on Physico-Mechanical Properties of Glass Fabric Reinforced Epoxy Composite Systems", First International Conference on Composites and Nano-composites (ICNC-2011), Institute of Molecular Science and Engineering, Kottayam, Kerala, January 7th to 9th  
      13. Prashanth. N, K.M.Subbaya, N.Rajendra, Y.S.Varadarajan,  Suresha. B (2011):" Influence of grain size on abrasive wear behaviour of SiO2 filled glass fiber reinforced epoxy composite by Taguchi method", Joint international conference on advanced materials -2011, BTL Institute of Technology, Bangalore. 19-20 Aug 2011.
      14. Prashanth. N, K.M.Subbaya, N.Rajendra, Y.S.Varadarajan, (2011):" Taguchi Mathod and ANOVA approach for investigation on Three-body abrasive wear behavior of carbon fabric reinforced epoxy composite with and without graphite filler", (ICOEGC) International conference on Operational Excellence for Global Compititiveness., R.VCollege of Engineering, Bangalore. 3rd-5th Feb2011.
      15. Santhosh Kini, B S Kantharaju, B Suresha, B R Raju and Y  S Varadarajan  (2011):"Mechanical and three body abrasive wear behavior of Glass fabric reinforced epoxy composites filled with SiC and SiO2 particles" , International conference INCRAME-2011, , Dr. M G R Educational and Research Institute University, Chennai. 21 & 22nd April 
      16. S. Sudhakara, Y S Varadarajan, K.V.Manjunatha (2012): "A Mathematical Approach for determining the number of kanbans:A Step towards non-Stock Production in Manufacturing Scenario" International Conference on Current trends in Engineering and Management,12-14th July 2012, VVCE, Mysuru
      17. Ravichandran G, Y S Varadarajan, B Suresha (2011):" Effect of filler addition on cutting force and delamination during drilling of glass fabric reinforced epoxy composites" , International Conference on Emerging Trends and Engineering –11  (ICETE 2011), NMAM Institute of Technology, NITTE, May 4th, 5th.
      18. K.M.Subaya, S  Prashanth, N Rajendra, Y S Varadarajan, Suresha B. (2011):" Influence of Grain Size on Abrasive wear behavior of silicon di oxide (SiO2) Filled Glass fiber reinforced epoxy composite by Taghuchi method",  Joint International Conference on Advanced Materials – 2011, (ICAM-2011) 19th & 20th August 2011
      19. K.M.Subbaya, N.Rajendra, Y.S.Varadarajan,  Suresha.(2011):"Taguchi approach for characterization of abrasive wear of carbon-epoxy composite with graphite and SiC filler", NMD-2011, Hyderabad, 13-16 Nov 2011
      20. A.N.Manjunath, K.M.Subbaya, N.Rajendra, Y.S.Varadarajan;(2010):" Study of tribological behavior of polymer composite material by Taguchi Method" ,( AMMMT) Advanced Materials Manufacturing , management and Thermal Sciences, Siddaganga Institute of Technology, Tumkur, Karnataka, 18-19 Nov, p-84.
      21. K.M.Subbaya, B.Suresha, Y.S.Varadarajan, N.Rajendra(2009):"Investigation on Three-Body Abrasive Wear Behavior of Carbon Fabric Reinforced Epoxy Composite With and with out SiC Filler", NMD – ATM 2009”  13th to 17th  Nov,  Kolkota p-377
      22. Y S Varadarajan, B Suresha and B R Raju (2010):" Experimental Study on Drilling of Particulate Filled Glass-Epoxy Composites Manufactured by Hand Lay-up Technique", International Conference on Advanced materials, Manufacturing, Management and Thermal Sciences (AMMMT-2010) November 18, 19th SIT Tumkur.
      23. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2010):" Abrasive Wear Behavior Of Glass / Epoxy Composite Filled With Alumina Filler" ,International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences, Nov 18 & 19,2010,SIT, Tumkur.
      24. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2008):" Tribological Behaviour of fibre reinforced polymer composites", Proceedings of International Conference on Micro Electro Mechanical System, 22 & 23 October,2008. Anjuman Engineering College Bhatkal, India
      25. K.M.Subbaya, Mohammed Ismail, N.Rajendra ,Y.S.Varadarajan, B.Suresha  (2007) :"Investigation on mechanical and abrasive wear behavior of carbon fabric reinforced epoxy composite with & without SiC filler, Symposium on energy related materials"  NMD-ATM-2007 (National metallurgist day Annual Technical Meeting of IIM, Nehru Science Centre, Mumbai, 15th -16th November. 2F3-4 p-21
        National Conference
      1. Varun nag, Y S Varadarajan.(2016):" An impact of Packaging in supply chain system for Automobile industries ", NCETM-29-30th April 2016
      2. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2012):" Three body abrasive wear behavior of Carbon Fabric Reinforced Epoxy Composite ", Proceedings of the 3rd National Conference on Emerging Trends in Materials for Advanced Technology,20th and 21st March 2012,KVGCE sullia.
      3. B S Kantharaju, Santhosh Kini, B Suresha and Y S Varadarajan (2011):" Mechanical Properties of Glass Fabric Reinforced epoxy composites Filled with SiC and SiO2 Particles ", National Conference POLYCON-  SJCE, Mysore. 25th & 26th April 2011.
      4. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2011):" Mechanical and Tribological Properties of Carbon Epoxy",International Conference on Advanced Materials and Processing, Dec 19-20,2011, RMK Engineering college Chennai.
      5. Prashanth.S, Subbaya.K.M , Rajendra.N and Varadarajan.Y.S, (2011):" Influence of grain size on erosion wear behavior of silicon dioxide (SiO2) filled glass fiber reinforced epoxy composite- A Taguchi approach." POLYCON 2011, 5th National Conference on Plastic and Rubber  Technology, SJCE, Mysore. 25th May2011
      6. Prashanth.N, Subbaya.K.M , Rajendra.N and Varadarajan.Y.S, (2011):" Solid Particle Erosion Wear Behavior of Carbon  Fiber Reinforced Epoxy Composite Using Taguchi Approach" , POLYCON 2011, 5th National Conference on Plastic and Rubber  Technology, SJCE, Mysore. 25th May2011
      7. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2010):" Friction and wear characteristics of epoxy based composites filled with different fillers and reinforcements- A Review" , National conference on Mechanical Engineering trends-COMET-2010, Dept, of Mechanical Engineering, BITM, Bellary , 19th -20th February 2010.
      8. N.Prashanth, K.M.Subbaya, N.Rajendra, Y.S.Varadarajan; (2010):"Influence of grain size on Three body abrasive wear behavior of carbon fabric reinforced epoxy composite", (AMC2010) Advances in New Engineering Materials and Charaterization. KVG college of Engineering, Sullia , 29Dec p-92
      9. Sudarshan Rao K, Y.S.Varadarajan, N Rajendra (2009)::" Tribological properties of epoxy based composites filled with different fillers and reinforcements-A Review", National conference on recent trends in advanced materials, 18th December 2009
      10. Deepak M.V.S, K.M.Subbaya, Y.S.Varadarajan, B.K.Sridhara : (2008) Three body abrasive wear behavior of Molybdenum Disulphide  filled fiber glass epoxy Composites",  NCEPRS- Macro( National conference on Eco-Friendly plastics and rubber system), Department. of Polymer Science & Technology, SJCE, Mysore, 19th – 20th May. P-55
      11. M.R.Haseebuddin, K.M.Subbaya, Y.S.Varadarajan,  (2008):"Influence of molybdenum disulphide filler additions on three body abrasive wear behavior of glass reinforced polyester resin composites", NCEPRS- Macro, National conference on Eco-Friendly plastics and rubber system, Department. of Polymer Science & Technology, SJCE, Mysore, 19th – 20th May.
      12. K.M.Subbaya, B.Suresha, Y.S.Varadarajan, N.Rajendra  (2007):"Mechanical and two body abrasive wear of Glass fabric & carbon fabric reinforced Vinyle Ester composite", (NCOAIMAIE-2007) National Conference in advances in manufacturing and industrial Engg, V.N.R Vijnana Jyothi Institute of Engineering and Technology, Hyderabad, 17 – 21 July.p-13.
        Textbook Chapter
      • B.Suresha,Y.S.Varadarajan, G Ravichandran(2011):"Effect of Micro filler Addition on Physico-mechanical Proferties of Glass Fabric Reinforced Epoxy Composite Systems", in Composites and Nanocomposites, Apple Academic Press, Toronto, New Jersey
      International Journal
      1. Mahesha , K M Subbaiah,, Nithin K S, Jagajeevan Raj B M, SachhidanandaShivanna(2018): "Highly Flexible and Conducting Polymer Nanocomposite Films for Selective Gas Sensing Applications ", Elseveir, ScienceDirect Materials Today: Proceedings9 (2019) 515–521.
      2. S Prashanth, K M Subbaya, K Nithin, S Sachhidananda. (2017):" Fiber Reinforced Composites - A Review", Journal of Material Science & Engineering. 06. 10.4172/2169-0022.1000341.
      3. Harshith N.R, K.M.Subbaiah,(2016):"CEO analysis of hydrodynamic lubrication in pressure die application to wire drawing" ; International academy of science engineering and technology.
      4. Sakesh, K.M.Subbaiah, G.L.Shekar, B.K.Anil Kumar(2016) :"Foam finned down flow type automotive radiator rating and swing", Trans Stellar
      5. Krishna Prasad S, Uday K N, Dr. M S shamprasad3, K M subbaiah(2015):"An Ergonomics Intervention in a Steering gear ManufacturingIndustry to Improve the Productivity". International journal on recent Technologies in Mechanical and Electrical Engineering
      6. K.M.Subbaiah, Srikanth P Chakravarthy, Shekar G.L. (2015):"Ergonomics study of automobile assembly line",. International journal on recent Technologies in Mechanical and Electrical Engineering .Vol 2. Issue 5, 2349-7947.
      7. K.M.Subbaiah, Srikanth P Chakravarthy, Shekar G.L. (2015):"Ergonomic assessment and risk reduction of automobile assembly tasks using postural assement tools". International journal of research science and Management Vol 2(6), June 2015.ISSN 2349-5197.
      8. K.M.Subbaiah, Rajesh A.S, Mohammed Ismail,(2015):"Improvement in material handling equipment – an Ergonomic case study", .International journal on recent Technologies in Mechanical and Electrical Engineering .Vol 2. Issue 5, 2349-7947.
      9. K.M.Subbaiah, Rajesh A.S, Mohammed Ismail, Basavaraju G.(2015):"Optimization of transportation cost in supply chain management". International journal of research science and Management Vol 2(6), June 2015.ISSN 2349-5197.
      10. K.M.Subbaiah, Maruthi Talwar, Prasad Raghuveer (2015):" Optimization of fuel delivery variations in PF conventional pump", International Journal of Innovative Research in Science,Engineering and Technology. Vol 4, Issue 5, May 2015, ISSN2347-6710.
      11. Bhaskara P, Raghuveer Pradsad, K.M.Subbaiah, G.L.Shekar(2014):"Root cause analysis of control rod friction in DFIP using SHAININ approach".International journal of mechanical engineering and technology, Vol5, issue9, p200-205
      12. K.M.Subbaya, B Suresha, N Rajendra, Y S Varadarajan. (2012):" Taguchi Approach for  Characterization of Three-Body Abrasive Wear of Carbon-Epoxy Composite With and Without SiC filler". Composite interfaces.19, 297-311.
      13. M. Sudheer, K M Subbaya, Dayananda Jawali, Thirumaleshwara Bhat. (2012) "Mechanical properties of potassium titanate whisker reinforced Epoxy resin composites", Journal of Minerals & Materials characterization and engineering, Vol. 11, No. 2 pp.193-210.
      14. K.M.Subbaya, B Suresha, N Rajendra, Y. S Varadarajan. (2012):" Multiple response optimization of Three-body abrasive wear behaviour of graphite filled carbon-epoxy composites using grey-based Taguchi Approach",  Journal of Minerals & Materials characterization and engineering, 11,876-884.
      15. K.M.Subbaya, B Suresha, N Rajendra, Y S Varadarajan. (2012) :"Grey-based Taguchi approach for wear assessment of SiC filled carbon-epoxy composites", Journal of Materials and Design, Elsevier, Vol 41, P124-130. ISSN-0261 3069.
      16. B Suresha, B.N.Ramesh, K.M.Subbaya,  G. Chandramohan.(2010):"Mechanical and three body wear behavior of carbon epoxy composite with and without graphite filler", Journal of composite materials , Sage, Vol 44/, No.21. pp-2509-19,    ISSN-0021-9983 (Oct)
      17. B Suresha, B.N.Ramesh, K.M.Subbaya, B.N.Ravikumar, G. Chandramohan (2010): "Influence of graphite filler on two body abrasive wear behavior of carbon  fabric reinforced epoxy", Journal of  Materials and Design 31, 1833-1841. 
        National Journal
      • Rashmi S N, Subbaya K M ,Y S Varadarajan.(2012):" Grey based Taguchi approach for wear assessment of SiC filled glass fabric reinforced epoxy composites". International journal of business review and manufacturing management (IJBRMN) Vol.2, No.1, pp12-17,ril 2012: ISSN 2231-5349.
      International Conferences.
      1. Ashajyothi M, Mohammed Ismail, Vinutha P, K M Subbaiah, H N Divakar and NithinKundachira Subramani (2020): “Mechanically flexible and visibly transparent polymer based composite materials for UV protection application”, PESCE, Mandya ICMES-2020 Conference, 28, 29th February 2020.
      2. Ashajyothi M, Mohammed Ismail, Vinutha P, K M Subbaiah, H N Divakar and NithinKundachira Subramani (2020): “Nanotechnology enabled Smart Fabrics: Development and Performance Evaluation”, Dayanandsagar College AMCES-2020 Conference, Bengaluru, 17, 18th January 2020.
      3. K.M.Subbaiah, N.Girish(2014):" Establish ment of backup  system for NC robot in weld line to keep up line efficiency. International conferences on current trends in engineering and technology(ICCTET-2014). Akshaya college of engineering and technology ,coimbatore
      4. Sandeep. B, Subbaiah K M,(2013):" Study on Three-body abrasive wear behavior of glass fiber reinforced polyester Composite", International Conference on Technology Management for Green Environment, (ICTMGE) – 2013,21st September, 2013: VTU RC, Mysore
      5. Sandeep. B, Subbaiah K M;(2013):" Study of Graphite Filler in Glass Fiber Reinforced Polyester Composite with Varying Aging Environment under Tensile Loading" , ICCSEM – 2013 , 26th& 27th, September, 2013, Dayananda Sagar Institutions, Bangalore.
      6. Syed ShadaabZaid , Subbaya K M (2012):" Design of wheel and assembly (Hub- reduction) for off-highway" . International conference on Recent advances in Mechanical Engineering (INCRAME-2012), 19-20 April 2012.
      7. Sharath  Chandra, Subbaya K M (2012):" Arecanut spadix cutting and pesticide spraying machine",  International conference on Recent advances in Mechanical Engineering (INCRAME-2012), 19-20 April 2012.
      8. Kiran R, Subbaya K M ,G L Shekar. (2012):" Optimization of Abrasive wear of warp knitted triaxial Glass Fiber reinforced epoxy composite using grey relation analysis". International conference on Recent advances in Mechanical Engineering (INCRAME-2012), 19-20 April 2012.
      9. Rashmi S N, Subbaya K M , Y S Varadarajan. (2012):" A Gray-based Taguchi approach for wear assessment of SiO2 Filled Glass Fabric Reinforced epoxy composite". International conference on Recent advances in Mechanical Engineering (INCRAME-2012), 19-20 April 2012.
      10. K.M.Subaya, S  Prashanth, N Rajendra, Y S Varadarajan, Suresha B. (2011) :" Influence of Grain Size on Abrasive wear behavior of silicon di oxide (SiO2) Filled Glass fiber reinforced epoxy composite by Taghuchi method"  Joint International Conference on Advanced Materials – 2011, (ICAM-2011,) 19th& 20th August 2011.
      11. K.M.Subbaya, N.Rajendra, Y.S.Varadarajan, Suresha.(2011):" Taguchi approach for characterization of abrasive wear of carbon-epoxy composite with graphite and SiC filler", NMD-2011, Hyderabad, 13-16 Nov 2011.
      12. Prashanth. N, K.M.Subbaya, N.Rajendra, Y.S.Varadarajan,  Suresha. B (2011):" Influence of grain size on abrasive wear behaviour of SiO2 filled glass fiber reinforced epoxy composite by Taguchi method". Joint international conference on advanced materials -2011, BTL Institute of Technology, Bangalore. 19-20 Aug 2011.
      13. Prashanth. N, K.M.Subbaya, N.Rajendra, Y.S.Varadarajan, (2011):" Taguchi Mathod and ANOVA approach for investigation on Three-body abrasive wear behavior of carbon fabric reinforced epoxy composite with and without graphite filler", (ICOEGC) International conference on Operational Excellence for Global Compititiveness., R.VCollege of Engineering, Bangalore. 3rd-5th Feb2011.
      14. A.N.Manjunath,K.M.Subbaya, N.Rajendra, Y.S.Varadarajan;(2010):" Study of tribological behavior of polymer composite material by Taguchi Method", ( AMMMT) Advanced Materials Manufacturing , management and Thermal Sciences, Siddaganga Institute of Technology, Tumkur, Karnataka, 18-19 Nov, p-84.
      15. K.M.Subbaya, B.Suresha, Y.S.Varadarajan, N.Rajendra(2009):"Investigation on Three-Body Abrasive Wear Behavior of Carbon Fabric Reinforced Epoxy Composite With and with outSiC Filler" , NMD – ATM 2009”  13th to 17th  Nov,  Kolkota p-377
      16. M.V.S.Deepak, K.M.Subbaya, M.R.Haseebuddin, (2008):" Effect of colour on product design" (ICMME2008) International conference on recent trends in materials and Mechanical engineering, Dr Mahalingam college of Engineering and Technology, Pollachi, Tamilnadu, 18-20Dec. p-242
      17. B.Suesha, K.M.Subbaya, KunigalS.Shivakumar, Sampathkumaran, S.Seetharam; (2007):" Tribological behavior of carbon-carbon composites" ,(IUMRS-ICAM2007) Material research society of India IISc ,Grand Hotel Ashoka, Bangalore. 8-13 October. P-0-20.
      18. K.M.Subbaya, Mohammed Ismail, N.Rajendra ,Y.S.Varadarajan, , B.Suresha (2007):" Investigation on mechanical and abrasive wear behavior of carbon fabric reinforced epoxy composite with & without SiC filler", Symposium on energy related materials  NMD-ATM-2007 (National metallurgist day Annual Technical Meeting of IIM, Nehru Science Centre, Mumbai, 15th -16th November. 2F3-4 p-21
        National Conference
      1. Mahesh, K.M.Subbaiah(2018):"Development and performance evaluation of polymer based conducting composite films for gas sensing applications" . National conference on 'Advanced   materials for health, energy, and environment'(AMMHEE-2018) JSS science and technology, Mysore 23-24March2018 
      2. Sandeep B. Subbaiah K M(2013):"Study on Three-body abrasive wear behavior of glass fiber reinforced polyester Composite",  National Conference on Technology Management for Green Environment , (ICTMGE) – 2013' , 21st September, 2013, VTU RC, Mysore
      3. Sandeep. B, Subbaiah K M.(2013):" Study of Graphite Filler in Glass Fiber Reinforced Polyester Composite with Varying Aging Environment under Tensile Loading", International Conference on Covergence of Science, Engineering & Management in Education and Research), ICCSEM – 2013, 26th& 27th, September, 2013, Dayananda Sagar Institutions,
      4. Sakesh, K.M.Subbaiah, G.L.Shekar, B.K.Anil Kumar (2015):"Review on alternative materials for automotive radiators", Nano and material science conference (NMS-2015) , Dayananda sagar college of Engineering, Bengaluru 21 December 2015
      5. Sandeep B, Subbaiah K M,(2013):" Effect of Graphite Filler on Tensile Behavior of Glass Fiber Reinforced Polyester Composite", COGNIE Science – 2013, National level Technical Symposium11th May, 2013 , Dept. of Mechanical Engineering , The National Institute of Engineering, Mysore
      6. Prashanth.S, Subbaya.K.M, Rajendra.N and Varadarajan.Y.S, (2011):" Influence of grain size on erosion wear behavior of silicon dioxide (SiO2) filled glass fiber reinforced epoxy composite- A Taguchi approach." POLYCON 2011, 5th National Conference on Plastic and Rubber  Technology, SJCE, Mysore. 25th May2011.
      7. Balagangadhara Gowda, Subbaya.K.M,G.L.Shekar, (2011):" Effect of fiber orientation on three-body abrasive wear behavior of glass fiber reinforced epoxy composite- A Taguchi Approach", POLYCON 2011, 5th National Conference on Plastic and Rubber  Technology, SJCE, Mysore. 25th May2011.
      8. Prashanth.N, Subbaya.K.M,Rajendra.N and Varadarajan.Y.S, (2011):" Solid Particle Erosion Wear Behavior of Carbon  Fiber Reinforced Epoxy Composite Using Taguchi Approach", POLYCON 2011, 5th National Conference on Plastic and Rubber  Technology, SJCE, Mysore. 25th May2011
      9. N.Prashanth, K.M.Subbaya, N.Rajendra, Y.S.Varadarajan; (2010):" Influence of grain size on Three body abrasive wear behavior of carbon fabric reinforced epoxy composite", (AMC2010) Advances in New Engineering Materials and Charaterization. KVG college of Engineering, Sullia , 29Dec p-92
      10. KolimetoChasie, K.M.Subbaya, Y.S.Varadarajan, N.Rajendra;(2009),  Advances in Mechanical Engineering-2009,5Oct2009.VidyaVikas Engineering and Technology.
      11. Deepak M.V.S,K.M.Subbaya, B.K.Sridhara  (2008):" product styling,   NCEPRS- Macro( National conference on Eco-Friendly plastics and rubber system), Department. of Polymer Science & Technology, SJCE, Mysore, 19th – 20th May. P-121
      12. Deepak M.V.S, K.M.Subbaya, B.K.Sridhara (2008):" Challenges of Product Development team"  NCEPRS- Macro( National conference on Eco-Friendly plastics and rubber system), Department. of Polymer Science & Technology, SJCE, Mysore, 19th – 20th May. P-109.
      13. K.Mohammed Faheem, K.M.Subbaya, Mohammed Ismail, N.Rajendra; (2008):" Solid particle erosion of Molybdenum Disulphide Particle filled epoxy Composites", NCEPRS-Macro(National conference on Eco-Friendly plastics and rubber system), Department. of Polymer Science & Technology, SJCE, Mysore,19 - 20 May. P-62.
      14. Deepak M.V.S, K.M.Subbaya, Y.S.Varadarajan, B.K.Sridhara(2008):" Three body abrasive wear behavior of Molybdenum Disulphide  filled fiber glass epoxy Composites", NCEPRS- Macro( National conference on Eco-Friendly plastics and rubber system), Department. of Polymer Science & Technology, SJCE, Mysore, 19th – 20th May. P-55
      15. K.M.Subbaya, Chethan.S, N.Rajendra (2008):" Abrasive wear behavior of silicon carbide filled unsaturated polyster glass fiber composites" , NCEPRS- Macro( National conference on Eco-Friendly plastics and rubber system), Department. of Polymer Science & Technology, SJCE, Mysore, 19th – 20th May. P-89
      16. M.R.Haseebuddin, K.M.Subbaya, Y.S.Varadarajan,(2008):"Influence of molybdenum disulphide filler additions on three body abrasive wear behavior of glass reinforced polyester resin composites"NCEPRS- Macro( National conference on Eco-Friendly plastics and rubber system), Department. of Polymer Science & Technology, SJCE, Mysore, 19th – 20th May.
      17. Ajith,K.M.Subbaya(2007):" Damping force variation reduction in canister Shock absorber of Two wheelers using design of experiments", Advances in materials and manufacturing Processes,UBDTE, Davanagere, 5th October2007
      18. Arun BabaK.M.Subbaya (2007):" Study on Mechanical and tribological behavior of Glass-Epoxy Composites, Advances in materials and manufacturing Processes", UBDTE, Davanagere, 5th October
      19. K.M.Subbaya, Suresha.B. (2007):" Three body abrasive wear behavior of PMMA/TPU blends", Advances in materials and manufacturing Processes,UBDTE, Davanagere, 5th October.
      20. K.M.Subbaya, B.Suresha, Y.S.Varadarajan, N.Rajendra (2007)"Mechanical and two body abrasive wear of Glass fabric & carbon fabric reinforced Vinyle Ester composite" (NCOAIMAIE-2007) National Conference in advances in manufacturing and industrial Engg, V.N.R Vijnana Jyothi Institute of Engineering and Technology, Hyderabad, 17 – 21 July.p-13.
      • S. Manjunath Yadav ,K. V. Arun,S. Basavarajappa,Narendranath S. & Santosh Kumar (2011) :“Collapse Mechanism of Foam Cored Sandwich Structures Under Compressive Load”, in Polymer-Plastics Technology and Engineering 50(13):1351-1356
      • S. Basavarajappa,S. Manjunath Yadav , Santosh Kumar,K. V. Arun &Narendranath S.(2011) :“ Abrasive Wear Behavior of Granite-Filled Glass-Epoxy Composites by SiC Particles Using Statistical Analysis” in Polymer-Plastics Technology and Engineering 50(5):516-524
      • S. Basavarajappa,S. Manjunath Yadav , Chakrasali Chandrakumar,,K. V. Arun & Santosh Kumar.(2011):“ The effect of filler on the friction performance of automotive brake friction materials”, Journal of Tribology and Surface Engineering, Volume 2 Issue 3-4
      Journal Publications

      Rashmi S N and K. M. Subbaiah(2012): “A Grey-Based Taguchi Approach for Wear Assessment of Sio2 Filled Glass Fabric Reinforced Epoxy Composite”, International Journal of Business Review and Manufacturing management , Vol. 02, Issue 01, PP 12-17, ISSN 22315349, 2012.

      Conference Proceedings

      Rashmi S N and K. M. Subbaiah (2012): “Three Body Abrasive Wear Analysis using Grey based Taguchi Method”,3rd National Conference on Emerging Trends in Materials for Advanced Technology – NETMAT 2012.
      • “Process Capability Study of a Finish Grinding Operation” in International Journal of Darshan Institute on Engineering Research & Emerging Technologies. Vol 5 No. 1, ISSN 2320-7590, pp. 31-34.
      • “Process variability reduction of Finish turning operation using Statistical process control” in International Journal for Science and Advance Research in Technology, Vol 2, Issue 5, May 2016, ISSN 2395-1052.
      • “Process variability reduction of Finish turning operation using Statistical process control” National Conference held at SJBIT, Bengaluru on 7-5-2016.
      • Internatinal Journal 
        • Chandrachood  B, Dr.Divakar .H. N,  Nandini T S , Devaraju G R (2015): “Process capability improvement in pumping element manufacturing”, International Journal of Research Science and Management, Vol2, issue no:2349, 5197
        Conference Proceeding 
      • Nandini T S, Dr. H.N.Divakar (2014): “Implementation of Lean Tools in Rubber Tube Manufacturing Industry”, , 2nd International Conference on Current Trends in Engineering and Management,. 17-19, July 2014
      Journal Publications
      • Ashvini C R and Mohammed Ismail (2019). “Ergonomics and Technical Aspects in Redesign of Material handling system”, IJRESM, 2(2), 244-246.
      • Ashvini C R and Mohammed Ismail (2018). “A Literature Review on “Bottle Neck Analysis, Continuous Improvement through Lean Tool and Alternative Layout to improve Productivity in Manufacturing Industry”, International Journal of Engineering Applied Sciences and Technology. 3(8), ISSN No. 2455-2143,40-48.
      • Shashank S P and Mohammed Ismail (2017). “Industry 4.0:A Review On Future Manufacturing”, IJSART. 3(6), 628-633
      • H V Ramnag and Mohammed Ismail (2016). “Process variability reduction of finish turning operation using statistical process control”, International journal for science and Advance research in technology, 2(5), 470-473
      • R Nikhil and Mohammed Ismail (2016). “Wear studies on thermal coatings”, International journal for scientific research & Development, 2(6), 68-71.
      • H V Ramnag and Mohammed Ismail (2016). “Process Capability Study of a Finish Grinding Operation”, International Journal of Darshan Institute on Engineering Research & Emerging Technologies. 5(1), 31-34
      • Rajesh A S, Dr. K M Subbaiah and Mohammed Ismail. (2015). “Improvement in material handling equipment- An Ergonomic case study”, International Journal on Recent Technologies In Mechanical And Electrical Engineering. 2(5), 115-117
      • Rajesh A S, Dr. K M Subbaiah, Mohammed Ismail and Basavaraju G. (2015). “Optimization of Transportation Cost in Supply Chain Management”, International Journal of Research Science and Management, 2(6), 43-47.
      • S Puneeth, Mohammed Ismail and B Suresha. (2014) “The Effect of Addition of Nano Fillers on Three Body Abrasive Wear Behavior of Unidirectional Glass Fiber Reinforced Epoxy Composites”, IJMET, 5(9), 81-85
      • Manjunath Kuruvinashetti, Mohammed Ismail and B.Suresha. (2014), “Two body abrasive wear behavior of short glass fiber and particulate filled polymethyl methacrylate composites”, IJMET, 5(9), 86-90.
      • Mohammed Ismail, B Suresha and Vinay (2013): “Parametric Appraisal of Erosion Behaviour of Organo-Modified Montmorillonite Filled Epoxy Hybrid Composites by Taguchi Approach”, Journal of Reinforced Plastics Composites, 32(21)
      • B Suresha, G Chandramohan, Siddaramaiah,Kunigal M Shivakumar and Mohammed Ismail, (2007): “Mechanical and Three-Body Abrasive Wear Behaviour of Three-Dimensional Glass Fabric Reinforced Vinyl Ester Composite”, Material Science & Engineering A 480(2008), 573-579
        Conference Proceedings  
      • Ashajyothi M, Mohammed Ismail, Vinutha P, K M Subbaiah, H N Divakar and NithinKundachira Subramani (2020). “Mechanically flexible and visibly transparent polymer based composite materials for UV protection application”, PESCE, Mandya ICMES-2020 Conference, 28, 29th February 2020.
      • Ashajyothi M, Mohammed Ismail, Vinutha P, K M Subbaiah, H N Divakar and NithinKundachira Subramani (2020). “Nanotechnology enabled Smart Fabrics: Development and Performance Evaluation”, Dayanandsagar College AMCES-2020 Conference,Bengaluru, 17, 18th January 2020.
      • Mohammed Ismail, Veena Patil and B Suresha. (2012) “Effect of Impingement Angle on Erosive Wear Behavior of Graphite Filled Polyamide66/Polypropylene Blend”, International Conference on Macro and supermolecular Architectures and material (MAM-2012). Coimbatore, Tamilnadu, 21-25 November 2012.
      • Mohammed Ismail, Vinay Kumar D and B Suresha. (2012) “Hybrid effect of Coconut Fibers on the Mechanical and Abrasive Wear Behaviour of Polymer Composites”, International Conference on Current Trends in Engineering and Management (ICCTEM). VidyavardhakaCollegeof Engineering, Mysore, 12-14 July 2012.
      • Mohammed Ismail, B Suresha and N Rajendra (2012) “Investigations On Mechanical And Erosive Wear Behaviour Of Cenosphere Filled Carbon-Epoxy Composites”, 7-8 Jan,2012, Dubai. ICMAME.
      • Mohammed Ismail, B Suresha and N Rajendra (2011) “Investigation of Solid Particle Erosion Behaviour of Carbon-Epoxy Composite with and without Fly Ash Cenosphere”, 13-16 Nov 2011, Hyderabad.
      • Mohammed Ismail, B Suresha and Veena Patil, (2011) “Erosion Wear Characteristics Of Fiber And Particulate Filled Glass Polymer Composites-A Review”, International Conference on recent advances in Mechanical Engineering (INCRAME), Dr. MGR University Chennai, 21-22 April 2011
      • Mohammed Ismail, B Suresha and Shruthi (2011) “Study of Study of Solid Particle Erosion Wear characteristics of Carbon Reinforced Polymer Composites- A Review”, International Conference on recent advances in Mechanical Engineering (INCRAME), Dr. MGR University Chennai, 21-22 April 2011
      • Mohammed Ismail, B Suresha and N Rajendra (2011) “Investigation of erosion rate on fly ash cenosphere filled carbon fabric reinforced epoxy composites with Taguchi approach”, International Conference on recent advances in Mechanical Engineering (INCRAME), Dr MGR University, Chennai, 21,22 April 2011
      • Mohammed Ismail, B Suresha and N Rajendra (2009) “Mechanical and erosive wear behaviour of particulate filled PA66/PP nanocomposites” Science City, Kolkatta, 16,17 Nov 2009
      • B Suresha, G Chandramohan, Siddaramaiah, Kunigal M Shivakumar and Mohammed Ismail (2007): “Mechanical and Three-Body Abrasive Wear Behaviour of Three-Dimensional Glass Fabric Reinforced Vinyl Ester Composite”, Material Science & Engineering A 480(2008), 573-579 ICMAT (2007), Suntec City, Singapore, 1st to 6th July 2007.
      Journal Publication
      • Latha B.M, Dr. N.V Raghavendra. (2016) “CAN VALUE STREAM MAPPING BOOST MANUFACTURING INDUSTRY?”: Review of Extant literature - International Journal of Current Engineering and Scientific Research, 40-46
        Conference Proceedings
      1. Sushmitha M S, Manish Jagadish Gehlot Latha B M,(2018). “A study of barriers on Implementation Lean Manufacturing Systems in Indian Industry”, National Conference organized by Department of Industrial and Production Engineering,National institute ofEngineering, Mysuru, 2018
      2. Akshatha Bopanna C, Kaveramma A B ,Latha B M (2018). “Corrosion Resistance and Heat Treatment of Stainless Steels”,National Conference Organized by Department of Industrial and Production Engineering, National institute of Engineering, Mysuru, 2018
      3. Anuradha A and Sanjay K R, Latha B M,, (2017).“Productivity Improvement using Value Stream mapping for Manufacturing Sectors”-A ReviewNational Conference organized by Department of Industrial and Production Engineering, National institute of Engineering, Mysuru, 2017
      Journal Publication
      1. Dr. H N Divakar, Asha Jyothi M, Vinutha P(2020):  "Mechanically flexible and visibly transparent polymer based composite materials for UV protection application" , paper published in web of science journal , 28th & 29th February  2020 paper published in web of science journal
      2. Dr. H N Divakar,  Yashwanth Kumar M K(2019):" Increasing Productivity of Inter Axle Drive Head  (Iad) Workstation In Drive Head Assembly process", International Journal For Trends in Engineering and Technology, May, 2019 Vol-36, Issue-1, ISSN - 2349 -9303
      3. Dr. H N Divakar, Harshith C N, Study and analysis of fuel system snags in HAWK aircraft International Journal of Advancements in Research and Technoogy (ISSN 2278-7763)  Paper ID AJ028858 - 2018
      4. Dr. H N Divakar, Harshith C N,(2018):" Study of fuel system in aircraft " International Journal of Science and Engineering Research (IJSER)  Paper ID 0118633 - 2018
      5. Dr. H N Divakar,(2017): “Kanban Efficiency Measurement System (KEMS)”, IJSART - Volume 3 Issue 7 –JULY 2017, 156-159
      6. Dr. H N Divakar, Deepak R (2017):"Enhancement of Supply Chain Efficiency By Extending Kanban System”, IJSART. Volume 3 Issue 6 - JUNE 2017
      7. Dr. H N Divakar, Chandrachood B(2015):" Process capability improvement in pumping element manufacturing" ,  International journal of research science and management, 2(6), June 2015, 25-29
      8. Dr. H N Divakar, Nithin M R (2015):"Reduction of rejection in diesel fuel injection pumping element" , International Journal of research science and management, 2(6). June 2015, 30-37,
      9. Dr. H N Divakar (2014):" Quality Improvement of Pumping element used in diesel fuel injection",  International Journal of Scientific and Research Publications, Volume 4, Issue 7, July 2014, 1-5
            Conference Proceedings   
        1. Dr. H N Divakar,  Asha Jyothi M, Vinutha P (2020):", Nanotechnology Enabled Smart Fabriics", International conference for Development and performance evaluation of thermally adaptive smart fabrics  paper published in AIP/Materials, 17th & 18th  January 2020
        2. Dr. H N Divakar,  Asha Jyothi M, Vinutha P,(2020),:"Development and Performance Evaluation"  International conference for Development and performance evaluation of thermally adaptive smart fabrics  paper published in AIP/Materials, 17th & 18th  January 2020
        3. Dr. H N Divakar,  Yashwanth Kumar M K (2019):"Increasing Productivity of Inter Axle Drive Head (Iad) Workstation In Drive Head Assembly", National conference For Trends in Engineering and Technology, May, 2019 Vol-36, Issue-1, ISSN - 2349 -9303
        4. Dr. H N Divakar, Yashwanth Kumar M K (2019):"Reduction of cycle time to increase productivity of IAD Workstation in Axle Assembly by adapting automation and 5s",  International conference on Recent Trends in Materials and Mechanical Engineering - July 2019 scoups indexed and UGC approved journal
        5. Dr. H N Divakar, Yashwanth Kumar M K (2019):"Increasing productivity by Automation and 5S for Inter Axle Drive Head Assembly",  Process Poster Presentation National Conference on Materials, Mechanics Manufacturing and Industrial Engineering April 2019
        6. Dr. H N Divakar, Sandesh M(2019):" Implementation of Lean Tools in Processing industry", International Conference on recent research emerging trends in Material and Mechanical Engineering ICRETMME-July 2019
        7. Dr. H N Divakar, Sandesh M(2019):" Implementation of Lean Tools in Processing industry ", National Conference on Materials, Mechanics, Manufacturing and Industrial Engineering April 2019
        8. Dr. H N Divakar, Mohammed Kashif M (2018):"Productity improvement of surface mount technology (SMT line by Analysing 4Ms" , National conference on Materials, Mechanics, Manufacturing and Industrial Engineering April 2018
        9. Dr. H N Divakar, Mohammed Kashif M (2018):" Application of Single Minute exchange of Dies Methodology in Surface Mount Technology Line to reduce setup Time,"  International Conference on Recent Engineering and Technology May 2018 International Journal of Science and Innovative Engineering & Technology
        10. Dr. H N Divakar, Harshith C N,(2018):" Study and analysis of fuel system snags in HAWK" aircraft National conference on Materials Mechnics, Manufacturing and Industrial Engineering April 2018
        11. Dr. H N Divakar, Sandesh M(2018):" Electric Hotspot Sensor Controlled Nitrogen Solenoid (ESNS) Engine" National Conference on Materials, Mechanics, Manufacturing and Industrial Engineering April 2018
        12. Dr. H N Divakar, Deepak R(2017): “Enhancement of Supply Chain Efficiency By Extending Kanban System”, Prathibimb 2017, April 2017
        13. H N Divakar, Prof. B. Ghosh (2004):"A Comparison on the Properties of Electroless and Electroplated NI-P Coating", Recent Advances in Mechanical Engineering RAME 2004, K.K. Wagh College of Engineering, Nasik Maharashtra January 16-17, 2004 P MD34-MD38
        14. Dr. H N Divakar, Kallesh S S,B Suresha and Krishna(2014):"The effect of impingement angle on erosion rates of polyacetol based composites", International conference on Current Trends in Engineering and Management ICCTEM-2014,17th – 19th, July 2014
        15. Dr. H N Divakar,  Kiran Lakkam (2013):"Study of Mechanical properties AA8011 processed by CRCS method ", International Conference on Advanced materials, manufacturing, management and thermal science, SIT, Tumkur, May 2013
        16. H N Divakar, Sandya Value (2011):"stream mapping for the effective utilization of resource carried out at one of the tyre manufacturing industries",  National conference Recent Advancement in Engineering & Technology March 2011
        17. H N Divakar, Prof. B. Ghosh(2005):" Experimental Analysis of Electroplating & Electroless Coating of Ni-P and their properties", Recent trends in Design and Manufacturing Technologies-RTDMT 2005, Kumaraguru College of Technology Coimbatore Tamilnadu INDIA March 17-18, 2005
        18. H N Divakar, Prof. B. Ghosh(2005):"  Statistical Analysis Method for Predicting the Deposition Rate of Electroless Ni-P Coating ", Recent trends in design and manufacturing technologies-RTDMT 2005, Kumaraguru College of Technology Coimbatore Tamilnadu, INDIA. March 17-18, 2005
        19. H N Divakar, Prof. B. Ghosh (2005):" Electroless Coating an option for corrosion resistance for Industrial Application ", ‘Product Development with Mechatronics Systems for Global quality’ –PMGQ 2005, Thiagarajar Collegeof Engineering Madurai – Tamilnadu, INDIA May 2-3, 2005 P433-438
        20. H N Divakar, Prof. B. Ghosh (2005):" Surface Roughness of Electroless Ni-P and Ni-B Coating Using Surtronic 3+ Roughness Checker, Product Development with Mechatronic Systems for Global quality’ – PMGQ 2005, Thiagarajar College of Engineering Madurai – Tamilnadu, INDIA, May 2-3 2005 P439-444
        21. H N Divakar, Prof. B. Ghosh(2004):"  Multilayer Coating: An Option For Hard Coating, Recent Advances in Mechanical Engineering” –RAME 2004, K.K. Wagh College of Engineering Nasik, Maharashtra January 16-17, 2004 MD 61-MD64
           
        International Journal
        1. Jangam Ramesh, Dr Mohan Ram M, Dr Varadarajan Y S (2019): "Sustainable value addition to Micro, Small, and Medium Enterprises (MSMEs) in India: A review of Industry 4.0" , International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST), ISSN (ONLINE):2456-5717Vol.5, Issue.7, July 2019
        2. Jangam Ramesh, Mohan Ram M, Y.S. Varadarajan) (2019): “ Sustainable value addition to Micro, Small and Medium Enterprises (MSMEs) in India:  A review of Industry 4.0”, (IJARBEST) page no. 343 – 350, ISSN (ONLINE) 2456-5717.
        3. Sharath B N and Shekar G L, Mohan Ram M (2018): “Overall Inventory Control in Manufacturing Industry”, International Journal of Advancements in Research and Technlogy (ISSN: 2278-7763)
        4. Bindushree  A R, Mohan Ram M (2017): “ Endurance Testing for Body Scanner Machine” International Journal for Science and Research in Technology(IJSART), Volume:3 Issue -7, June 2017.
        5. Hitesh Kumar B and Basavaraju G, Mohan Ram M  (2017): “Increasing the Profitability of Manufacturing Industry by Reducing the Transportation Expenses”, International Journal for Science and Research in Technology ( IJSART) Volum3:3, Issue -7, July 2017.
        6. Apoorva M V, Mohan Ram M (2016) : “Design and Fabrication of CNC Fixture for a Spring Sheet Component” International Journal of Technical Research and Application, e-ISSN: 2320 – 8163,Volume 4: Issue 3: (May-June 2016) PP: 106-110
        7. Apoorva M V, Mohan Ram M (2016): “Time Study Analysis of Loading and Unloading of Componenet from a CNC Fixture”, International Journal of Technical Research and Applications – e-ISSN: 2320 8163, Volume 4: Issue 3: ( May-June 2016) PP: 239-243.
        8. Manjuatha N, Mohan Ram M (2016) :“Productivity and Workplace Improvement Using Ergonomics: A Case Study”, International Journal of Technical Research and Applications (IJSART) ISSN: 2320-8163, (May-June 2016),Volume:4 Issue-3 (May-June) PP: 296-299  – Impact Factor – 5.11(SJIF)
        9. Manjunatha N, Mohan Ram M (2016): “ Workplace Improvement Through Ergonomics Using DHM: A Case Study”, International Journal for Science and Advance Research in Technology ( IJSART), Volume 2, Issue 5, (May 2016) Online : 2395-1052
        10. Mohan Ram M, Haripriya Gundimeda VinishKathuria (2015): “Does energy intensity affect labour productivity in Indian firms? preliminary estimates”, Cambridge Scholars publisher.
        11. Nandana P , Mohan Ram M , Raghuveer Prasad (2015): ”Reduction of Nozzle Tip Breakage in Heavy Duty Diesel Vehicles using Problem Solving Approach” International Journal on Recent Technologies in Mechanical and Automobile Engineering (IJRMAE) Volume 2: Issue 6: ISSN: 2349 -7947,  017-020
        12. Mohan Ram M (2013) “Design and Fabrication of Lathe Fixture for Brake Drum ( Cargo) Machining”, International Journal of Scientific and Research Publications, ISSN 2250 – 3153.
          National Journal
        • Mohan Ram M, HaripriyaGundimeda and Prof. VinishKathuria (2012): “Does Energy Intensity affect Labour Productivity in Indian Firms? Preliminary estimates – pre MSMED Act 2006”, Vo1 1,  Excel India Publishers
          International Conference
        1. Md. Aaqib Javeed), Mohan Ram M  (2019) : “Ultimate shear strength of Ice Quenched ExtrudedA16061-SIC Composites” National Conference on  Materials, Mechanic, Manufacturing and Industrial Engineering, Dept of I&P Engineering, NIE, Mysuru, April 12-13, 2019.
        2. Md. Aaqib Javeed), Mohan Ram M  (2019) : “poly (vinyl Alcohol) Stabilized Light Emitting Phosporous Introduced Fiber Reinforced Composites for Decorative Application” Cognisicence-2019, National level Technical Paper Presentation Competition, Dept of Mechanical Engineering,  NIE, Mysuru, April 11, 2019.
        3. Md. Aaqib Javeed), Mohan Ram M  (2019) : “Mechanical Behaviour of Glass Fiber Reinforced Polyester Resin Based Flourescent Composites” International Conference on Frontiers in Materials from Basic Science to Real-time Applications, Centre for Nano and Material Sciences, Jain (Deemed to be University), Bengaluru, March 13-16, 2019
        4. Sharath B N and Shekar G L, Mohan Ram M (2018): “Inventory Control and Management in Manufacturing Industry”, International Conference on Mechanical, Industrial and Production Engineering, 26thAugust  2018 , Bengaluru.
        5. Mohammed Yaseen Kotwal and Shekar G L, Mohan Ram M (2018):  “Supply Constraint Removal in Critical Parts” International Conference on Advances in Materials and Manufacturing Applications, August 16-18, 2018, Amrita Viswa Vidyapeetham, Bengaluru
        6. Mohammed Yaseen Kotwal and Shekar G L, Mohan Ram M (2018):  “Freight Management in Manufacturing Industry” International Conference on Mechanical. Industrial and Production Engineering, July 22 2018, Bengaluru
        7. Sharath B N and Shekar G L, Mohan Ram M (2018): “Inventory Reduction in Manufacaturing Industry” National Conference on Materials, Mechanics, Manufacturing and Industrial Engineering, Prathibimb, NIE, Mysore, April 27-28,  2018
        8. Mohammed Yaseen Kotwal and Shekar G L, Mohan Ram M (2018):  “Supply Constraint Removal in Critical Parts”, National Conference on Materials, Mechanics, Manufacturing and Industrial Engineering, Prathibimb , NIE, April 27-28, 2018
        9. Mohan Ram M (2017) :“Energy, Sustainability and Life Cycle Risk Analysis”, Global Initiative of Academic Networks (GIAN), JSS Technical Institutions Campus, Mysuru ,13th to 28th February 2017
        10. Manjunatha N, Mohan Ram M (2016): “Productivity Improvement by reducing MSD’s Using Ergonomics”, National Conference on Emerging Trends in Mechanical Engineering,(NCETM_2016) AIT, Bengaluru, April 29th and 30th 2016,
        11. Jayasheela Bai V , Mohan Ram M,  B. Suresha) (2014): “Effect of Fiber and Filler Loading Two-Body and Three Body Abrasive Wear Behaviour of Polyamide 66 Composites” 2nd International Conference on Current Trends in Engineering and Management, ICCTEM -2014, 17-19 July 2014
        12. Mohan Ram M (2014)South –East Asean Network for Disaster and Environmental Engineering (SEAN-DEE) project sponsored by the German Academic Exchange service DAAD, 2nd to 16th November 2014, University of Kassel. Germany.
        13. Mohan Ram M,  Haripriya Gundimeda and Prof. VinishKathuria) (2013), “Does Energy Intensity affects Labour Productivity in Indian Firms? Estimates of Pre and Post MSMED Act, 2006, in the 26th International Conference on Efficiency, Cost, optimization, Stimulation and Environmental Impact of Energy Systems, Guilin, China, July 16th to 19th2013.
        14. Mohan Ram M,. Haripriya Gundimeda , Vinish Kathuria). (2012): “Does Energy Intensity affect Labour Productivity in Indian Firms? Preliminary estimates – pre MSMED Act 2006”, at International Conference on Public policy and Governance 2012 (PPG 2012), IISc. Bangalore, September 4th to 7th 2012.
        15. Mohan Ram M, Haripriya Gundimeda , VinishKathuria (2012): "Does energy intensity affect labour productivity in Indian Firms? Preliminary estimates – Post MSMED Act 2006”, at 8th Biennial Conference on Advances in Energy Studies (BIWAES 2012) at IGIDR, Mumbai, October 25th to 28th, 2012.
        16. Mohan Ram M, Haripriya Gundimeda ,VinishKathuria(2012):“Does Energy Intensity affect Labour Productivity in Indian Firms? Estimates of Pre and Post MSMED " Act 2006, in the 12th International Consortium of Students in Management Research (COSMAR 2012), IISc., Bangalore, November 16th, 17th 2012.
        17. Mohan Ram M, Prof. HaripriyaGundimeda , VinishKathuria) (2012): “Does Energy Intensity affects Labour Productivity in Indian Firms? Estimates of Pre and Post MSMED Act 2006, in the first International Conference on Economics, Business and Management, New Delhi, December 19th to 22nd2012.
        18. Mohan Ram M (2012) URBIO 2012, “Urban Biodiversity and Climate Change: Adaption and Mitigation”, 8-12 October 2012, Mumbai, India 
          National Conference  
        1. Manjunatha N, Mohan Ram M (2016): “Productivity Raising through workplace improvement using EGO-TASK”, Institute for Studies on Recent Advances in Science and Engineering (ISRASE).
        2. Mohan Ram M (2015): “DISASTER MANAGEMENT”, International Workshop on Intercultural Aspects of , BPBIM, Mysuru and UNI KASSEL, Germany , 7th -9th April 2015
        3. Mohan Ram M, Haripriya Gundimeda and Prof. VinishKathuria). (2012):" Labour Productivity, Energy Intensity and Capital Intensity in indentifying barriers to energy efficiency: A case study of Micro, small, Medium and Large Enterprises (MSMEs) in India ", 48th Annual Conference of the Indian Econometric Society (TIES), at Pondicherry University, Pondicherry, India, March 1st to 3rd 2012
        4. Mohan Ram M (2010) “International Conference on “Science, Technology and Economy: Human Capital and Development”, IIT Bombay, India, November 11-12, 2010 (2010) “The 10th International Consortium of Students in Management Research”, COSMAR 2010, IISC., Bengaluru, India.
        An Indian Patent has been filed on the invention ‘ Development of a device for tapping Carbon Black in Diesel Engine Vehicles’