Here’s a brief glimpse of the rich and varied repertoire of publications and achievements of the Faculty members of the Department of Mechanical Engineering.

Journal Publication
  1. Vinay D R, Vijay Kumar S L, and Sandeep K. (2018): “Fabrication and experimentation of aqua silencer”, International Journal of Technical Innovation in Modern Engineering & Science), 2455-2585 volume 4, issue 7     
Conference Proceedings
  1. Sandeep K, C R Rajashekhar and Karthik S R  (2019): “Experimental Studies on Effect of Nano particle blended Biodiesel Combustion on Performance and Emission of CI Engine”, IOP International Conference Series: Materials Science and Engineering at Mangalore Institute of Technology & Engineering, Karnataka, India, during March 5-7, 2018
Journal Publications
  1. S. Raghunandan, R. Suresh Kumar, M. Kamaraj, Ashutosh S. Gandhi (2019): “Role of water in the sol-gel synthesis of yttrium monosilicate”, Ceramics International, 45(4), 4487-4492.
  2. Surendra B. Anantharaman, V. B. Rajkumar, S. Raghunandan, K.C. Harikumar, R. Suresh Kumar, Ashutosh S. Gandhi (2017): “Role of thermodynamic miscibility gaps in phase selection in sol-gel synthesis of yttrium silicates”. Journal of European Ceramic Society, 37(17), 5001-5007. 
  3. S. Raghunandan, Jasim Akber Hyder, T. P. D. Rajan, K. Narayan Prabhu, B.C. Pai (2012): “Processing of Primary Silicon and Mg2Si Reinforced Hybrid Functionally Graded Aluminum Composites by Centrifugal Casting”, Trans Tech Publications 710, 395-400. 
  4. Ablation behaviour of in-situ formed yttrium silicate environmental barrier coatings (to be submitted)
  5. Evolution of phases in the sol-gel synthesis of ytterbium silicates (to be submitted)
      Conference Proceedings
    1. S. Raghunandan, R. Suresh Kumar, M. Kamaraj, Ashutosh S. Gandhi (2016): “Sol-gel synthesis and in-situ formation of yttrium silicates for environmental barrier coating applications” at Indo-US Bilateral Workshop on Ceramic Coatings and Multilayers, 25-28 February 2016; Coorg, India.
    2.  S. Raghunandan, R. Suresh Kumar, M. Kamaraj, Ashutosh S. Gandhi (2016): “Sol-gel synthesis of yttrium monosilicate” at the International Congress on Ceramics (ICC – 6), 21-25 August 2016; Dresden, Germany.
    3. S. Raghunandan, R. Suresh Kumar, M. Kamaraj, Ashutosh S. Gandhi (2016): “In-situ formed yttrium silicates as prospective environmental barrier coatings” at ISRS-2016, December 21-23, Department of Metallurgical and Materials Engineering, IIT Madras.
    4. S. Raghunandan, R. Suresh Kumar, M. Kamaraj, Ashutosh S. Gandhi(2017) : “Evolution of phases in the sol-gel synthesis of yttrium monosilicate for environmental barrier application” at EH-TACAG (Indian Ceramic Society Annual Meeting - 2017), December 14-16, College of Engineering, Pune.
    5. Surendra B. Anantharaman, V. B. Rajkumar, S. Raghunandan, K.C. Harikumar, R. Suresh Kumar, M. Kamaraj, Ashutosh S. Gandhi (2018): “Role of Thermodynamic Miscibility Gap in Phase Selection in Sol-gel Synthesis of (Y, Yb -) Silicates” at MS&T 2018, Oct 14-18, Columbus, Ohio.
    6. S. Raghunandan, R. Suresh Kumar, M. Kamaraj, Ashutosh S. Gandhi (2019): “Evolution of phases in the sol-gel synthesis of ytterbium silicates” at ADMAT 2019 – International Conference on Advanced Defence Materials and Processes, Sep 23-25, Hyderabad, India.
    Journal Publication
    • Deepak. P, B. R. Narendra Babu, Dr. K. Chandrashekara. (2014): “Linear Regression and ANOVA Modelling Tool When Turning of EN 24/EN 31 Alloy Steel”, International Journal of Engineering and Research Application”, 4(6), 216-221.
    Conference Proceedings
    • Deepak. P, B. R. Narendra Babu, Dr. K. Chandrashekara. (2014): “Linear Regression and ANOVA Modelling Tool When Turning of EN 24/EN 31 Alloy Steel” National Conference on Emerging Trends in Engineering Management organized by JSS Academy of Technical Education, Bengaluru during November 6-7, 2014
    International Journals
    • Sreejith Mohan, S.P.Sivapirakasam, P. Bineesh and K.K. Satpathy (2014) Strategies for Controlling Welding Fumes at the Source - A Review, Applied Mechanics and Materials, Vols., 592-594, 2539- 2545.(SCOPUS Indexed)
    • Sreejith Mohan, S.P. Sivapirakasam, M.C. Santhosh Kumar and M. Surianarayanan (2015) Welding Fumes Reduction by Coating of Nano-TiO 2 on Electrodes, Journal of Materials Processing Technology, 219, 237–247.(Impact Factor – 3.147)
    • Sivapirakasam, S.P., Sreejith Mohan, M.C. Santhosh Kumar and M. Surianarayanan (2015), Welding Fume Reduction by Nano-Alumina Coating on Electrodes – Towards Green Welding Process, Journal of Cleaner Production, 108, 131-144.(Impact factor – 6.352)
    • Sreejith Mohan, S.P. Sivapirakasam, M.C. Santhosh Kumar and M. Surianarayanan (2016), Application of Taguchi Method in the Optimization of Process Parameters for a Sol - Gel Derived Nano Alumina Film, ProcIMechE Part L: Journal of Materials – Design and Applications, 230, 574-585.(Impact factor – 1.625)
    • S.P. Sivapirakasam, Sreejith Mohan, M.C. Santhosh Kumar and M. Surianarayanan (2017), Modeling of Fume Formation from Shielded Metal Arc Welding Process, Metallurgical and Materials Transactions B, 48, 1268-1278. (Impact Factor – 1.642)
    • S.P. Sivapirakasam, Sreejith Mohan, Ashley Thomas Paul, M.C. Santhosh Kumar and M. Surianarayanan (2018), Control of Exposure to Hexavalent Chromium Concentration in Shielded Metal Arc Welding Fumes by Nano-Coating of Electrodes, International Journal of Occupational and Environmental Health. (DoI: 10.1080/10773525.2018.1436014)(Impact Factor – 2.06)
    • Ajay AV, Sivakumar S Nair, Sreejith Mohan and Vaisakh Y (2018), Investigation on the Influence of Nano Structured Zirconia Coating on the Corrosion Inhibition of SS 304 Stainless Steel, Advanced Manufacturing and Materials Science, 203-212. (SCOPUS Indexed)
    • M. S. Senthil Saravanan, T. Nagaraj, Sreejith Mohan, Shiva Rama Krishna Singh, K. Sivaprasad, S. P. Kumaresh Babu, and J. B. Sajin, Synthesis of metal catalyst carbon nanotubes by arc-discharge method used for energy efficient applications, AIP ConferenceProceedings 2039,020072(2018); https://doi.org/10.1063/1. 5079031
    • Albin Joseph, Sreejith Mohan, Arun Mathew, Vishnu B.R, S.P. Sivapirakasam (2019), Experimental Investigation on the Pool Boiling Heat Transfer Enhancement Using Sol-Gel Derived Nano- CuO Coating, Experimental Thermal and Fluid Science, 103, 37-50. (Impact Factor – 3.396)
    National/ International Conferences
    • Sreejith Mohan and M. Unnikrishnan, Numerical Modeling of Visco Elastic Materials Using Prony Series, National Conference on Technological Trends, Aug, 2011, College of Engineering Trivandrum.
    • Sivapirakasam, S.P., M. Sreejith, K.R. Balasubramanian and M. Surianarayanan, Respirable Fume Analysis During the Flux Cored Arc Welding of SS316L (N) Austenitic Stainless Steel, International Conference on Advance Research in Mechanical , Aeronautical and Civil, Sep 7, 2013, Pattaya, Thailand.
    • Albin Joseph, Sreejith Mohan, Arun Mathew, S.P. Sivapirakasam, M.C. Santhosh Kumar, M. Surianarayanan, Pool Boiling Heat Transfer Enhancement using Nano-CuO Coating, International Conference on Green Technology and Energy Efficiency, 28 th Sep-1 st Oct, 2016, Sakarya University, Sakarya, Turkey.
    • Sivakumar S Nair, Ajay AV, Sreejith Mohan, Abel A, Arabind K, Gokul K G, Akhil S, Influence ofNano Structured ZrO 2 -TiO 2 Composite on the Corrosion Inhibition of AISI 304 Austenitic Stainless Steel, National Conference on Ecofriendly Technological Innovations for Sustainable Development, 6-7 April, 2017, Sree Buddha College of Engineering, Pattoor, Alappuzha.
    • Ajay AV, Sivakumar S. Nair, Sreejith Mohan, Vaisakh Y, Investigation on the Influence of Nano Structured Zirconia Coating on the Corrosion Inhibition of SS 304 Stainless Steel, International Conference on Advanced Manufacturing and Material Science, 15-16 January 2018, Muthoot Institute of Technology and Science, Ernakulam.
    • Ajay AV, Sreejith Mohan, Vaisakh Y,Corrosion Protection of AISI 304 Stainless Steel with Multilayered Nano ZrO 2 -TiO 2 Composite Coatings, Kerala Technological Congress (KETCON), 23-25 Feb 2018, APJ Abdul Kalam Technological University and Kerala State Council for Science Technology and Environment.
    • M. S. Senthil Saravanan, T. Nagaraj, Sreejith Mohan, Shiva Rama Krishna Singh, K.Sivaprasad, S. P. KumareshBabu, J. B. Sajin, Synthesis of metal catalyst carbon nanotubes by arc-discharge method used for energy efficient applications, International Conference on Sustainable Engineering and Technology (iConset 2018), 19 th – 20 th April 2018, ACS College of Engineering, Bangalore
    • M.S.Senthil Saravanan, Sreejith Mohan, Saji Varghese S.P.Kumaresh Babu, K. Sivaprasad, Effect of Crystallite size on Electrical conductivity of carbon nanotubes reinforced AA 4032 Composites, 25 th - 27 th October 2018, International Conference on Advanced Materials and Manufacturing Process for Strategic Sectors (ICAMPS 2018), Indian Institute of Metals (Trivandrum Chapter).
    Conference Proceedings
    1. Shivaraj Dharennavar, Prasanta Kumara Samal, Dr. Suresha B “Design and Fabrication of Fixture for Shear Testing of Composite Materials in Universal Testing Machine.” National Conference on Mechanical, Materials and Manufacturing Engineering, NCMMME – 2016, NIE Mysuru, May 23-24, 2016.
    Journal Publication
    1. Somashekar H K, Madhu K S, M Raviprakash ; “Characterization of Materials and static analysis of motorbike chassis Trellis frame By Using FE Analysis” International Journal for Ignited Minds, ISSN:2349-2082, Volume-01, Issue-06, June 2014.
    2. Madhu K S, Somashekar H K; “Structural Analysis And Optimisation Of Two Wheeler Alloy Wheel By Using FEA Approach” International Journal for Ignited Minds, ISSN:2349-2082, Volume-01, Issue-06, June 2014.
    3. Suresh Babu K, Gunti Ranga Srinivas, Somashekar H K, S Padmanabha; An Evaluation Of Jute-Epoxy-Hybrid Composite Materials For Automotive Frontal Crash Safety Applications International Journal of Research in Engineering and Technology, eISSN: 2319-1163 | pISSN: 2321-7308, Volume: 04 Issue: 07 | July-2015
    Journals
    1. Ajith Nagaraj Naik, M.V.Achutha, Annappa Manjunath Gunaga, Dinith Ashokan, Harensh Ramesh Naik(2018), “Smart Drip Irrigation System Using Soil Moisture Level and Weather Data”, Internal Journal for Researching for Applied Science and Engineering Technology”, Volume 6, Issue 5,2260-2266.
    2. M.V.Achutha, Keshavnath.B.G, Sharat Chandra(2016), “Concept Design and Analysis of Low Cost O-Ring Assembly Machine for Adjustable Ball Race Assembly”, International Journal of Innovative Research in Advanced Engineering, Volume 3, Issue 7,36-41
    3. Sharatchandra.N, Natarag.G.K, M.V.Achutha(2016),“Concept Design and Analysis of Multipurpose Farm Equipment”, International Journal of Innovative Research in Advanced Engineering, Volume 3, Issue 2,30-36
    4. Basappa Hulugappa, Mysuru Venkataramaiah Achutha, Bheemappa Suresha(2016),   “Effect of Environmental Conditions on Flexural Strength and Fracture Toughness of Particulate Filled Glass-Epoxy Hybrid Composites”, Materials Sciences and Applications , Volume 7, 710-729
    5.  Basappa Hulugappa, Mysuru Venkataramaiah Achutha(2016), Bheemappa Suresha   “Effect of Fillers on  Mechanical Properties and Fracture Toughness of Glass Fabric Reinforced Epoxy Composites”, Journal of Minerals and Materials Characterization and Engineering, Volume 4,1-14
    6. M.V.Achutha, Vinush.G, K.R.Prakash(2015), “Dry Sliding Wear Behaviour of Nickel Aluminide coated on Zinc”, International Journal of Current Engineering and Technology, Volume 5, Issue 3,1836-1840
    7. K.R.Prakash, M.V.Achutha,C.N.Kaushik(2015)“Design and Development of Automation System for Polyeurethane Foaming Machine”, International Journal of Research Studies in Science, Engineering and Technology,Volume 2, Issue 6,1-9
    8. Madhushekar, Lakshmikant.S, M.V.Achutha, N.V.Raghaveandra(2015), “Human Activity Recognition Through Accelerometer Sensor Using Data mining”, International Journal for research in applied science & Technology, Volume 3, Issue 8,142-150
    9. B.Hulugappa, M.V.Achutha, B.Suresha(2014),   “Effect of Type and Loading of Micro Fillers on Fracture Toughness of Glass Fibric Reinforced Epoxy Composite Polymer”, Advanced Research and Innovation in Mechanical Mechanical Material Science, Industrial Engineering and Management,210-214
    10. M.V.Achutha, B.K.Sridhara and D.Abdul Budaan(2008) “A Reliability based stress-life evaluation of Aluminum Graphite particulate composites”, Journal of Materials an Design, ELSEVIER, Volume 29, Issue4, 769-774
    11. M.V.Achutha, B.K.Sridhara and Abdul Budaan(2008) “Fatigue Life Estimation of Hybrid Aluminium Matrix Composites”, International Journal on Design and Manufacturing technologies,Volume2, Issue1, 14-21
      Conference Proceedings
      1. Arun Dixit, M.V.Achutha and B.K.Sridhara(2020), “Opportunities for Aluminium Lm6-Boron Carbide(B4c)Metal Matrix Composites in Fatigue Based Applications: A review, National Conference on Futuristic Trends in Materials , Manufacturing and Mechanical Engineering(FTMMME-2020) 28-29Feb 2020, NIT Raipur.
      2. Shrinatha R.Katti, M.V.Achutha and B.K.Sridhara(2019),”Fatigue Behaviour of polymer nano Composites-A review”, 3rd International Conference and Exhibition on Fatigue, Durability and Fracture mechanics, A symposium on condition Assessment /Residual Life Assessment and Extension. Fatigue durability India 2019, 29th to 31stt Aug 2019,VTU Belgaum.
      3. Shrinatha R.Katti, M.V.Achutha and B.K.Sridhara(2018), Theoretical and “Theoretical and Experimental Tensile Behaviour of MWCNT and CNP filled Polypropelene Thermoplastic Composites”,             International Conference on Innovation in Engineering Technology and Sciences(ICIETS).,ISBN: CFP18Q63-PRT/978-1-5386-7321- 8, Supported by IEEE, 20th to 21st Sept 2018
      4. Basappa Hulugappa, Mysuru Venkataramaiah Achutha, Bheemappa Suresha(2014), “Fracture Toughness of Glass Fabric Reinforced Epoxy Composites": Effect of Filler Addition and Temperature. ICPC-2014, NITK, Surathkal.
            Book Chapters
          1. Arun Dixit, M.V.Achutha and B.K.Sridhara(2019) “Evaluation of Critical Speed for Aluminium-Boron Carbide metal Matrix Composite Shaft”. - Lecture notes in Mechanical Engineering, Innovative Design Analysisand Development Practices in Aerospace and Automotive Engineering,I-DAD,  Springer Nature Singapore, Pte ltd. 2019. Springer,527-534
            Journal Publication
            1. B. Hulugappa, Dr.M.V.Achutha, Dr.B.Suresha.” Effect of filler on mechanical properties and fracture toughness of glass fabric reinforced epoxy composites”. JMMCE,  Vol 4, Issue 1, pp 1-14, 2015.
            2. B.Hulugappa, Dr.M.V.Achutha, Dr.B.Suresha. “Effect of Environmental Conditions on Flexural Strength and Fracture Toughness of Particulate Filled Glass-Epoxy Hybrid Composites, Materials Sciences and Applications”, 710-729,vol 7,Issiue 5, PP 2016.
              Conference Proceedings
            1. B. Hulugappa, Dr. M.V.Achutha,  Dr.B.Suresha. “Effect of type and loading of Micro fillers on fracture toughness of glass fabric reinforcing epoxy composites”. ICARIMMIEM-2014
            2. B.Hulugappa, Dr.M.V.Achutha, Dr.B.Suresha. “Fracture Toughness of Glass fabric Reinforced Epoxy Composites: Effect of Filler addition and Temperature”. ICPC-2014, NITK.
            Journal Publication
            1. Vijaykumar H, Bharat Raj L, V Auradi , S T Dundur, “Studies on mechanical and machinability properties of B4Cp reinforced 6061 aluminium MMC produced via melt stirring”, Applied Mechanics and Materials, Scientific.net, volume 592-594, July 2014 
            2. Vijaykumar H, Bharat Raj L, V Auradi, “Experimental investigation of cutting forces, surface roughness in the turning of B4Cp reinforced 6061 Aluminium metal matrix composites”, International Journal of  Applied Engineering Research, ISSN 0973-4562, vol.10, No.24, 2015.
              Journal Publication
              1. Sandhya K, Chandra Sekhar K, Rohini Nagapadma and L Krishnamurthy (2012): “Recent Advancement on Different Electrode Materials for next generation energy storage devices” International journal of Renewable Energy Engineering, Elixir 
              2. A. Subrahmanyam, Paul Ramesh T, Chandra Sekhar kanuru, Albert Jayakumar and Jayashree gopal (2013): “Quantification of Photocatalytic Oxygenation of Human Blood”  International Journal of Medical Engineering and Physics, Elsevier. ( Impact factor  2.26). 
              3. K. Chandra Sekhar et. Al (2014), “Surface Morphological Studies of Solar Absorber Layer Cu2ZnSnS4 (CZTS) Thin Films by Non-vacuum Deposition Methods” at Journal of Nano- and Electronic physics. 
              4. A.Subrahmanyam, A. Rajakumar, Md. Rakibuddin, T. Paul Ramesh, M. Raveendra Kiran,D.Shankari, Chandra Sekhar (2014): “Efficacy of titanium doped-indium tin oxide (Ti/TiO2–ITO) films in rapid oxygen generation under photo catalysis and their suitability for bio-medical application” High quality  research in Physical Chemistry and Chemical Physics, RSC publications, Impact factor: 4.5, 
              5. M.Vinuth, H.S. Bhojia Nayak, Jayappa Manjanna, B.M.Vinoda  Chandra Sekhar (2015):  “Environmental Remediation of Hexavalent Chromium in aqueous medium using Fe-II montomorillonite as Reductant” in  Journal of Procedia Earth and Planetary Science 11275 – 283, Elsevier Publications
              6. M.Vinuth, H.S. Bhojia Nayak, Jayappa Manjanna, B.M.Vinoda and Chandra Sekhar 2016):“Rapid Removal of Hazardous Rose Bengal Dye Using Fe(III)– Montmorillonite as an Effective Adsorbent in Aqueous Solution” Journal of Environmental & Analytical Toxicology, Volume 6 • Issue 2• 1000355, 
              7. KC Sekhar, SL Abhilasha, SR Bhat, NU Raj, K Srikrishna, RGK Urs (2018): Deposition of nano-structured multilayer coatings of Cu2ZnSnS4 (CZTS) thin films by vacuum thermal evaporation method  , IOP Conference Series: Materials Science and  Engineering 402 (1), 012138 
              Conference Proceedings
              1. K. Chandra Sekhar Abhilasha S.L, Krishnamurthy L, G. L. Shekar,  and R. Gopal Krishne Urs (2016), “Deposition of Cu2ZnSnS4 ( CZTS) thin films by Sol-Gel Method”, Second Indo-Canadian Symposium on Nano-Science and Technology,   ICSNST-2016 held at the National Institute of Engineering, Mysore from February 18--19, 2016. 
              2. K. Chandra Sekhar Vijaya S B, Krishnamurthy L, G. L. Shekar,  and R. Gopal Krishne Urs (2016), “Fabrication of Lead Sulfide Thin Film Quantum Dot Solar Cell” , Second Indo-Canadian Symposium on Nano-Science and Technology,   ICSNST-2016 held at the National Institute of Engineering, Mysore from February 18--19, 2016.
              3. K. Chandra Sekhar, Madan S.J, Krishnamurthy L, G. L. Shekar,  and R. Gopal Krishne Urs (2016) “Studies and Fabrication of Perovskite Solar cell” , Second Indo-Canadian Symposium on Nano-Science and Technology,   ICSNST-2016 held at the National Institute of Engineering, Mysore from February 18--19, 2016. 
              4.  K. Chandra Sekhar, Madan S.J, Krishnamurthy L, G. L. Shekar,  and R. Gopal Krishne Urs (2015): “Studies and Fabrication of CZTS thin films Photovoltaics by thermal evaporation method.”, Recent Advances in Nano-Science and Technology (RAINSAT-2015),  held at Satyabhama University, Chennai, from July 8-10, 2015. 
              5. K. Chandra Sekhar, PromodSN, L. Krishnamurthy, G.L.Shekar, B.K.Sridhara and R. Gopal Krishne Urs (2013)  “Surface Morphological Studies of Cu2ZnSnS4 (CZTS) Multistep Electro deposition route” in Indo-Candian Symposium on Nano-Science and Technology conducted by the National Institute of Engineering, India in association with McMaster University Canada on Feb, 2013 
              6. K. Sandhya and K. Chandra Sekhar (2013) “Recent Advancement on Different Electrode Material for Next Generation Energy Storage Devices” Indo-Candian Symposium on Nano-Science and Technology conducted by the National Institute of Engineering, India in association with McMaster University Canada on Feb, 2013 
              7. Chandra Sekhar (2012) “Progress towards Next generation of Photovoltaics: A literature Review selected in International Conference “Advanced Nano Materials conducted by IIT Madras, chennai " on 2012.
              Journal Publication
              1. Praveen R N, Murali D, Sandesh S Nayak, “Tribological Characteristics of Acrylonitrile-Butadiene-Styrene (ABS)Thermoplastic Composites”, International Journal of Mechanical Engineering and Robotics Research, ISSN 2278-0149, vol.2, No.4, October 2013.
              2. Sandesh S Nayak, Sachin D, Ramachandra, “Sea Water Microgrid- A Review”, International Journal of  Modern trends in Engineering and Research, ISSN 2349-9745,vol2, October 2016.
              3. Sandesh S Nayak, K Ruben Joseph, “Evaluation of Sugarcane Bagasse Polymer Composite for Structural Applications”, International Research Journal of Engineering and Technology, e-ISSN 2395-0056, vol.7, issue.01,January 2020
              4. Tajamul Pasha, Sandesh S Nayak, Vishal T S, Vinay Simha A, “An Investigation of the Mechanical and Tribological Properties of Aluminium Alloy Series with SiC Metal Matrix Composites: A Review”, International Research Journal of Engineering and Technology, e-ISSN 2395-0056, vol.7, issue.02, Febraury  2020
              5. Sandesh S Nayak, Varun K, Skanda H, “Mechanical characterisation of glass fibre composites by Using recycled plastics: a review”, ”, International Research Journal of Engineering and Technology, e-ISSN 2395-0056, vol.7, issue.02, Febraury  2020
              6. Tajamul Pasha, Sandesh S Nayak, “Modelling of robotic waiter using firebird V robot”, Journal of Mechanical Robotics, e-ISSN 2582-2187, volume 5,issue 1, 2020
              7. Sandesh S Nayak, Dr. Muniraju M, “Tensile & Flexural Behaviour of Sugarcane Bagasse Composites”, International Journal of Recent Technology & Engineering, e-ISSN :2277-3878, volume :08, Issue -06, March 2020
              Conference Proceedings
              1. Sandesh S Nayak, Natarajan S(2016) :  “Finite Element Analysis on Vertical Axis Wind Turbine Blade”, ICMAT – International Conference on Advanced Materials & Technology, organized by VMKVEC, Salem.
              2. Sandesh S Nayak, Dr Muniraju M (2020) : “Natural fibre reinforced polymer composite for automobile (structural) applications”, ICMAT –  International Conference on Advanced Materials & Technology, organized by JSSSTU, Mysore under TEQIP-III & NPIU(National Project Implementation Unit)
              1. B. M. Girish, K. R. Prakash, B. M. Satish, Pradeep Jain,(2011) K. Bavya DeviNeed for optimization of graphite particle reinforcement in ZA-27 alloy,Materials Science and Engineering A,Volume 530,Issue-1,Page-382–388.
              2. B.M. Girish, K.R. Prakash, B.M. Satish , P.K. Jain(2011)An investigation into the effects of graphite particles on the damping behavior of ZA-27 alloy composite material composites for tribological applications, Materials and Design, Volume 32,Issue-1,Page1050–1056.
              3. Amriya Tasneem H. R. Dr. K. R. Prakash and S.N. Ravi Shankar (2012)Introduction of PLC-Based Remote Laboratory for Modular Mechatronics System International Journal of Emerging Technology and Advanced Engineering ,Volume 2,Issue-7,page328-333, 2012 
              4. Harsha B V & K R Prakash(2013)Control of Seam Welding for an Axle Housing Using Programmable Logic Controller International Journal on Mechanical Engineering and Robotics, Issue-2, Volume-1,page-1-7.
              5. Sandeep S & K. R. Prakash (2013)“Automation of Loading and Unloading to CNC Turning Center, International Journal on Mechanical Engineering and Robotics, Vol. 1, Issue 2,Page-8-12.
              6. Vinush.G, M.V.Achutha and K.R.Prakash(2015)Dry Sliding Wear Behaviour of Nickel Aluminide coated on Zinc Aluminium alloy Metal Matrix Composite for Anti friction Applications, International Journal of Current Engineering and Technology, Issue 03, Volume 05 page-1836-1840.
              7. Ramya.V and K.R.Prakash (2017)“Wi-Fi Controlled Automatic Food Maker published in IEEE,Volume-978-1-5386-236 IEEE, Issue 1,page704-708.
              8. Ravi Kumar and K.R.Peakash(2018)Mathematical Modeling Of Unsaturated Isophthalic Resin’s Curing Cycle International Journal of Mechanical and Production Engineering Research and Development, Vol. 8, Issue 2, page 805-810.
              9. Kaushik ,C,N and K.R.Prakash(2015)Design and Development of Automation System for Polyurethane Foaming Machine, International Journal of Research Studies in Science, Engineering and Technology Volume 2, Issue 6, PP 33-41.
              10. Prakash.K.R,Ramya and Vinutha(2015)Mobile Robotics Software Reviews, International Journal of Innovative Research in Advanced Engineering Issue 5, Volume 2 page-78-84.
              11. K. R. Prakash, Ravikumar Beeranur and Pradeep Kumar (2017)“Development of Etch Surface on Eus Needle, International Journal of Research,Issue 08,Volume 04, 786-791, 2017
              12. Sudhanva S,Dr K R Prakash and Balaji Sunil Kumar(2017)Implementation of drive kinematics for a self-driving Car, International Journal of Engineering Development and Research, Issue 02, Volume 05,page-1444-1456, 2017
              13. Mrs. Ramya M V, Dr. G. K. Purushothama and Dr. K R Prakash(2017)PLCs based Remote Laboratory Platform for Learning Electrical Drive Control Applications, International Conference on Signal, Image Processing Communication and Automation,Issue-1page-74-76, 2017
              14. Neha M R, Mr.Madan G, Dr.K R Prakash ,Mr.Shivraj C.S(2019)Design and Development of Smart Containers using Smart Sensors to Maintain Inventory, International Research Journal of Engineering and Technology, Issue-6, Volume-6,page-593-598.
              15. Rakshitha.M.J, Mr.Madan G, Dr.K.R.Prakash,and Mr.Shivraj.C.S(2019)Design and Development Automated Food Maker, International Research Journal of Engineering and Technology, Issue-6, Volume-6,page-599-603.
              16. Mallaradhya H M, K R Prakash(2013) Automatic Liquid Filling to Bottles of Different Height Using Programmable Logic Controller, International Journal of Mechanical and Production Engineering, Issue-4,Volume-1,Page-9-11.
              17. Ramana Srinivas, Dr. K.R Prakash (2019)“Design & Development of a Prototype of an Agri-bot for Multiple Farming Applications & n,p, k Sensing (Nitrate, Phosphorus, Potassium), International Journal of Engineering Research & Technology, Issue-10, Volume-7,page-1-6. 
              18. Bharat.T.S, Shyamprasad and Prakash.K.R(2019)Design and Development of Automated & Programmable Testing Rig for Sensor Characterization, International Journal of Engineering Research & Technology, Volume 7, Issue 10, page-1-5, 2019
              19. Implementation of Lane Centering Algorithm using Model Predictive ControllerInternational Journal of Engineering Research & Technology, Volume 7, Issue 10, page-1-5,2019
              20. Poornachandra Tejasvi T M, K R Prakash(2019)“Automation of NetAct Integration Process using Robot Framework, International Journal of Engineering Research & Technology, Volume 7, Issue 10,page-1-4,2019
              21. Umesh.V,J.B.Simha,K.R.Prakah and Praveen.M.P(2019)“New Frame Work for Robot Assisted Minimum Invasive Surgery, International Journal of Advanced Science and Technology,Volume-29,No3,page-476-482,2019
              22. RAVIKUMAR.V, PRAKASH.K.R& NITHIN.K.S.(2020)Strain Sensing and Characterization of CNFs Wrapped with polyaniline/Polypyrrole based polymer composites, International Journal of Mechanical and Production engineering Research and Development , Vol10,Issue-2,page-1267-1274.  
              Book Chapter in Springer Book Title  Polymer-Based Smart Composites for Optoelectronic and Energy Applications 1st Edition,     Paperback ISBN: 9780128184844 Editors :M.R. Siddaramaiah,Nithin Subramani ,Joong Hee Lee Chapter :- Polymer Based Composites and Nanocomposites for Large Area Strain Sensor
               Journal Publication
              • Ajay Anand., and Chikkadevegowda (2015): " Characterization of Aluminium-Silicon Carbide Composite Using Stir Casting Technique", International Journal for Scientific Research and Development, Volume : 3, Issue : 8, 205-208.
              Conference Proceedings
              1. chaithra.K, Vinod Kumar H P (2019). Robotics Process Automation: Strategic technology Solutions for IT, International Journal of Engineering Research and Technology (IJERT), NCRACES - 2019 conference proceedings. 
              2. Kavya.L, Vinod Kumar H P (2019), PLC programming of a machine tending robot for CNC operations, International Journal of Engineering Research and Technology (IJERT), NCRACES - 2019 conference proceedings.
                Journal Publications
                1.  B. Harshavardhan, R. Ravishankar, B. Suresha, and S. Srinivas, “Static and Dynamic Mechanical Performance of Carbon Fiber Reinforced Polyethersulfone Composites,” Appl. Mech. Mater., vol. 895, pp. 265–271, Nov. 2019, doi: 10.4028/www.scientific.net/AMM.895.265.
                2.  B. Suresha, B. Harshavardhan, A. M. Rao, U. R. Koushik, and R. Hemanth, “Role of nano-fillers on tribological behaviour of ultra high molecular weight polyethylene composites,” Mater. Today Proc., p. S2214785319333322, Oct. 2019, doi: 10.1016/j.matpr.2019.09.089.
                3.  B. Suresha, B. Harshavardhan, and R. Ravishankar, “Tribo-performance of epoxy hybrid composites reinforced with carbon fibers and potassium titanate whiskers,” presented at the Advances In Mechanical Design, Materials And Manufacture: Proceedings of the First International Conference on Design, Materials and Manufacture (ICDEM 2018), Karnataka, India, 2018, p. 020069, doi: 10.1063/1.5029645.
                Conference Proceedings
                1. B. Suresha, B. Harshavardhan, A. M. Rao, U. R. Koushik, and R. Hemanth (2019): Nano-fillers on Tribological Behaviour of Ultra High Molecular Weight Polyethylene Composites, International conference on “Materials and Manufacturing Methods (MMM'19)” organized by NIT, Trichy during 05-07, July 2019.
                2. B. Harshavardhan, R. Ravishankar, B. Suresha, and S. Srinivas (2018): Static and dynamic mechanical performance of carbon fiber reinforced polyethersulfone composites, International conference on “Green Trends in Mechanical Engineering Sciences (GTMES-2018)”, MCE, Hassan, 03-05, Oct 2018
                3. B. Suresha, B. Harshavardhan, and R. Ravishankar (2018): Tribo-performance of epoxy hybrid composites reinforced with carbon fibers and potassium titanate whiskers, International Conference on “Design, Materials & Manufacture 2018”, Jan 29-31 2018.
                Journal Publication
                1. Suresha B, Sachin D, Shiddalingesha. (2019): “Morphology and Physico-Mechanical Properties of Basalt Fiber Reinforced Composites” is under review in Elsevier: Materials today proceeding which was uploaded in December 2019.
                2. Sachin D, Uday K N, Rajamurugan Govindaswamy, Prabhu Krishnasamy, (2019): “Effect of SiC Reinforcement on the Mechanical and Tribological Behaviour of Al6061 Composite” is under review in SAE: ADMMS which was uploaded in January 2020.
                3. Sachin D, P Dinesh, Mallikarjun Biradar, (2015): “Finite Element Analysis of Finite Plate with Normal and Oblique Tapered Holes Subjected to Tensile Load” is published in International Journal of Engineering Research & Technology (IJERT) Conference Proceeding, Volume 3, Issue.17
                 
                      Conference Proceedings
                    1. Sachin D, P Dinesh, Mallikarjun Biradar. (2015): “Finite Element Analysis of Finite plate with Normal and Oblique tapered holes subjected to Tensile load” in a National conference on ‘Engineering Resource areas in Mechanical Engineering’ organised by REVA University during 27th and 28th of March 2015.
                    Journal Publication
                    1. Abhishek.M and Rakesh.M.(2019): “Design and Development of Gantry of Automation Systems for Compressor Housing Machine”; Stem Journal of Engineering Science and Technology; Volume-02, Issue-04.
                    2. Rakesh.M.(2019): “Development and Performance Evaluation of Piezoelectric-Polymer based Composite materials for Automation”; International  Journal of Innovative Research in Advanced Engineering (IJIRAE), Volume-02, Issue-05, ISSN: 2278-0181.
                    3. Darshan KT and Rakesh M.(2019):“Simulation of an Autonomous Navigation System using Quadrator model in robot Operating System” ; International Journal of Innovative Research in Advanced Engineering (IJIRAE), Volume 2, Issue 05 ,  ISSN: 2278-0181.
                    4. Rakesh.M and Nisarga.S.(2018):“Development of Energy Monitoring and Control System for Smart Home”; International Journal Of Scientific Engineering & Information Technology (IJSRCSEIT), Volume-04, and Issue-06; ISSN: 2456-3307.
                    5. Rakesh.M, Mohan SG,Pradhyumna DR, Prafullachandra PS, Prajwal Setty,(2018): “Design and Fabrication of Automatic Dispensing Machine”; International Journal Of Scientific Research in Computer Science, Engineering & Information Technology (IJSRCSEIT), Volume-04, Issue-06/3377.
                    6. Rakesh.M and Julia George,(2018); “Automation of Compression Testing Machine “International Journal Of Scientific Research in Computer Science, Engineering & Information Technology (IJSRCSEIT)”, Volume-04, Issue-06, and ISSN: 2456-3307.
                    7. Shravan Raj and Rakesh.M,(2018):“Calculation and Analysis of Temperature and Pressure Drop of Exhaust Gas in the front pipe of Engine Exhaust” ,International Journal Of Scientific Research in Computer Science, Engineering & Information Technology (IJSRCSEIT), Volume-04, Issue-06, ISSN: 2456-3307.
                    8. Divya C Sejekan, Rakesh.M.(2017):“PLC controlled Automatic Nut tightening Machine”; International Journal Of Scientific Research in Computer Science ,Engineering & Information Technology, (IJSRCSEIT) Volume-02, Issue-02, ISSN:2456-3307.
                    9. Dr.K.R.Prakash, Mr.Lakshmikanth KS, Mr.Rakesh.M, Ramya MP, Vinuth R Nayaka.(2015): “Mobile Robots Software and Hardware Reviews”,International Journal of Innovative Research in Advanced Engineering (IJIRAE), Volume 2, Issue 05, ISSN:2349-2169.
                              Conference Proceedings
                              1. Drashan and Rakesh.M (2019): “Autonomous Navigation and Path Planning using Quadrotor in ROS”, International Conference on Advances in Mechanical Engineering & Management, ICAMEM-2019 held at VVCE Mysore during March 22-23, 2019.
                              2. Abhishek .M and Rakesh.M (2019):“Design and Development of Gantry Automation system for Compressor Housing Machining Line”, International Conference on Advances in Mechanical Engineering & Management, ICAMEM-2019 held at VVCE Mysore during March 22-23, 2019.
                              3. Chandan Raj and Rakesh.M ,(2019):Understanding and Development of Product Structure of Valves for Impact Analysis using PLM Team Center Software”, International Conference on Advances in Mechanical Engineering & Management, ICAMEM-2019 held at VVCE Mysore during March 22-23, 2019.
                              4. Rakesh.M,(2019): “Synthesis and Performance Evaluation of Piezoelectric Polymer based Composite materials for Sensor Application a, One day National Conference on Emerging Trends in Mechanical Engineering (NCETME) organized by MSRIT Bangalore.
                              5. Rakesh.M,(2019): “Development and Performance Evaluation of Piezoelectric Polymers based composite materials for Automatic Sensing” in the 3rd National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019) held at GSSSCE, Mysore held on 10th May 2019.
                              6. Darshan KT and Rakesh.M,(2019): “Simulation of an Autonomous Navigation system using quadrator model in robot Operating System in the 3rd National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019) held at GSSSCE, Mysore held on 10th May 2019.
                              7. Nisrga S and Rakesh.M (2018): “Development of Energy Monitoring and control system for smart Home”, Second National Conference on Robotics, Automation, Control and Embedded Systems-2018 at GSSS Institute of Engineering and Technology for Women, Mysore.
                              8. Julia Gorge and Rakesh.M (2018); “Automation of Compression Testing Machine,  Second National Conference on Robotics”, Automation, Control and Embedded Systems-organized by  GSSS Institute of Engineering and Technology for Women, Mysore.
                              9. Shravan Raj and Rakesh M,(2018): “Calculation and Analysis of Temperature and Pressure drop of exhaust gas in the front pipe of the engine exhaust”, Second National Conference on Robotics, Automation, Control and Embedded Systems-2018 at GSSS Institute of Engineering and Technology for Women, Mysore.
                              Journal Publications
                              1. S. Joshi, S. Grigorian, U. Pietsch, “X-ray Structural and Crystallinity studies of low and high molecular weight Poly(3-hexylthiophene),” Physica status solidi (a), vol. 205, pp. 488-496, 2008.
                              2. S. Joshi, S. Grigorian, U. Pietsch, P. Pingel, A. Zen, D. Neher, “Thickness dependence of the crystalline structure and electron mobility in thin films of low molecular weight poly(3-hexylthiophene),” Macromolecules, vol. 41, pp. 6800-6808, 2008.
                              3.  S. Joshi, S. Grigorian, U. Pietsch, P. Pingel, A. Zen, D. Neher, Michael Forster, Ullrich Scherf, “Bi-modal temperature behaviour of structure and mobility for HMW P3HT thin films, Macromolecules,” Vol. 42, pp. 4651-4660, 2009.
                              4. S. Grigorian, S. Joshi, U. Pietsch, “Temperature dependent structural properties of P3HT films,” Synchrotron radiation in polymer science, vol. 14, 012007, 2010.
                              5. S. Joshi, Mrunmaya Mudigere, L. Krishnamurthy, G. L. Shekar: “Synthesis and Morphological Characterization of NiO/CuO/ZnO based Inorganic Photovoltaic materials,” Chemical Papers, vol. 68, pp. 1584-1592, 2014.
                              6. S. Joshi, Mrunmaya Mudigere, L. Krishnamurthy, G. L. Shekar: “Growth of horizontal nano-pillars of CuO on NiO/ITO surfaces,” Journal of Nanoscience, vol. 2014, Article ID 635308, 2014.
                              7. S. Joshi, L. Krishnamurthy, G. L. Shekar, “Randomly oriented rectangular shaped nanostructures of CuO on NiO/ITO surface,” Advanced Materials Letters, vol. 7, pp. 735 - 742, 2016.
                              8. S. Joshi, A. R. Mahammed Shaheer, “Metal oxide thin film towards the electronic device applications,” International Journal of Nanotechnology, vol. 14, pp. 719-726, 2017.
                              9. Pramod Halappa, Thilak Raj S, Sairani R, S. Joshi, Madhusudhana R., C. Shivakumara, “combustion Synthesis and Characterization of Eu3+-Activated Y2O3 Red Nanophosphors for display device applications,” International Journal of Nanotechnology, vol. 14, pp. 833-844, 2017.
                              10. A. Revathi, V. Shalini, S. Joshi, “Cyclic Creep and recovery of Carbon Nanotube/epoxy shape memory polymer Nanocomposites,” Advanced Science, Engineering and Medicine, vol. 9, pp. 1-7, 2017.
                              11. S. Joshi, Inamul Hasan, Pruthvi M, Tulsiram MP, “X-ray diffraction – A simplistic approach for perovskite based solar cells degradation studies,” Mateialstoday: Proceedings, In Press, 2019.
                              12. Inamul Hasan, Siddharth Joshi, k. M. Subbaiah,, “Peorvskite thin films Structural Studies using Synchrotron Source X-ray Diffraction method,” Material Research Express (IOP), Submitted, 2020.
                                Conference Proceedings
                              1.  Yashu T.R, Pramod Halappa, Siddharth Joshi, C. Shivakumara (2017): “Synthesis, Characterization and Dye adsorption studies of Reduced graphene Oxide,” International Symposium on Advanced Materials for Engineering Applications organized by NIE Mysore during March 23-24, 2017.
                              2. Mahesh G. Emmi, Arvindrao M. Yadwad, Siddharth Joshi (2017): “Cooling rate dependent Structural studies of Metastable Binary Nd80Fe20 Material,” International Symposium on Advanced Materials for Engineering Applications organized by NIE Mysore during March 23-24, 2017.
                              3. Shalini V, M. Sendil Murugan, Siddharth Joshi, A. Revathi (2017): “Alignment of Multiwalled Carbon Nanotube in Epoxy Shape Memory Polymer by Induced Electric field,” International Symposium on Advanced Materials for Engineering Applications organized by NIE Mysore during March 23-24, 2017.
                              4. M.V. Sandesh, Pramod Halappa, Siddharth Joshi, C. Shivakumara (2017): “Synthesis, Characterization and Photo-Catalytic Activity of Bismuth oxyhallides for Photodegradation,” International Symposium on Advanced Materials for Engineering Applications organized by NIE Mysore during March 23-24, 2017.
                              5. Shalini V, S. Joshi, A. Revathi (2017): “Creep and recovery of MWCNT-epoxy Shape Memory Polymer Nano-composites,” INCCOM-15 National Conference on composites organized by NAL Bengaluru during March 2-3, 2017.
                              6. S. Joshi, A. R. Mahammed Shaheer, Tulsiram M P, G. L. Shekar (2015): “Copper oxide flower like nanostructure nano-structure for electronic device application,” National Conference on Emerging trends in Nano Applications 2015 organized by BMS Institute of Technology & Management, Bengaluru during March 27-28, 2015.
                              7. S. Joshi, A. R. Mahammed Shaheer (2016): “Belt/stripe like structure of Copper Oxide using Hydrothermal growth at low temperature,” National Conference on Mechanical, Materials and Manufacturing Engineering organized by NIE Mysuru during May 23-24, 2016.
                              8. Pruthvi M, S. Joshi (2016): “Degradational Studies of Perovskite material in photo- voltaic Cell Applications,” National Conference on Mechanical, Materials and Manufacturing Engineering organized by NIE Mysuru, May 23-24, 2016.
                                Book Chapters
                              1. S. Joshi, S. Grigorian, U. Pietsch on Physical and Chemical Aspects of organic Electronics from fundamentals to functioning devices, April 2009, Wiley-VCH Berlin, pp 189-205.
                              Funding/ Financial Support Received
                              1.  Received the Project support for 2 persons from DST, govt. of India to perform the Synchrotron source XRD measurements at Photon factory, Tsukuba, Japan, June 2019.
                              2. Received the SERB sponsored TARE project of 18.3 lakhs from the year 2019-20 for 3 years.
                              3. Received the Project support for 2 persons from DST, govt. of India to perform the Synchrotron source XRD measurements at Photon factory, Tsukuba, Japan, June 2018.
                              4. Received Rs. 45,000.00/year funding towards consumables and contingency for a project work of 3 years from UGC- DAE (RRCAT Indore) from year 2018-21.
                              5. Received 9 lakhs funding for 1 JRF with chemicals and contingency for 3 years from UGC- DAE (RRCAT Indore) from year 2017-20.
                              6. Worked as Scientist C under DST funded project from 2012-2015 at NIE Mysore.
                              Journal Publication
                              1. Pramod Halappa, S. Tilak Raj and R. Sairani, Siddharth Joshi and R. Madhusudhana, S. Shivakumar (2017): “Combustion synthesis and characterization of Eu3+-activated Y2O3 red nanophosphors for display device applications”, International Journal of Nanotechnology, Vol. 14, No. 9/10/11, (2017)
                              2. Madhusudhana R, M. A. Sangamesh, R. Gopalakrishne Urs, L. Krishnamurthy, G. L. Shekar: “Synthesis and Characterisation of ZrO2 by Simple Sol-Gel method”, International Journal of Advanced Research (2014), Vol. 2, Issue 4, 433-436.
                              Conference Proceedings
                              1. B. R. Thejashwini, Vijay Khopkar, R. Madhusudhana, B. Sahoo (2020): “Crystal growth and dielectric properties of ammonium dihydrogen phosphate(ADP) single crystal”, International Conference on 'Advances In Materials, Ceramics & Engineering Sciences' (AMCES- 2020) at Dayanand Sagar College of Engineering, Bengaluru on 17th-18th January 2020.
                              2. Yaseen K. R. Shariff , Harish K. Choudhary, Vijay Khopkar , Ankit Yadav, R. Madhusudhana, Balaram Sahoo (2020): “Sol-Gel Auto-Combustion Synthesis of Ba-Sr Hexaferrite Ceramic Powders”, , International Conference on 'Advances In Materials, Ceramics & Engineering Sciences' (AMCES- 2020) at Dayanand Sagar College of Engineering, Bengaluru on 17th-18th January 2020.
                              3. G. L. Bhuvana, B. N. Sherikar, R. Madhusudhana, B. Sahoo (2020): “Effect of Fly Ash on Setting Mechanism and Strength of Commercial Cement”, , International Conference on 'Advances In Materials, Ceramics & Engineering Sciences' (AMCES- 2020) at Dayanand Sagar College of Engineering, Bengaluru on 17th-18th January 2020.
                              4. Anish Raj K, Shivani Singh, Madhusudhana R, Sagar Mitra (2016): “Structural and electrochemical study of doped Li2FeSiO4/C cathode materials for future Lithium-ion Batteries, 2nd Indo-Canadian Symposium on Nanoscience and Technology (ICSNST’16), Feb. 18-19, 2016 at the National Institute of Engineering, Mysuru.
                              5. Madhusudhana R., Anish Raj K., Sachin Pande M.P., Naveen Kumar J.R., L. Krishnamurthy(2015): “Thermal Barrier Coatings for High Temperature Applications on Nickel Super alloy Substrate”, National Conference of Emerging Trends in Nano Applications (NCETN – 2015), BMS Institute of Technology, Bengaluru during March 27 -28, 2015.
                              Journal Publications
                              1. Managuli S.C., Aswath., Sathisha, H.M., and K.N. Seetharamu, 2019, “Numerical Simulation of Heat and Mass Transfer Along with Shrinkages in Brinjal(Eggplant/Solonummelongena)”, International Journal of Recent Technology And Engineering (IJRTE), ISSN:2277-3878, Volume-8, Issue-4, 2867-2872.
                              2. Sathisha, H.M., and Dalal, A., 2018, “An unsteady model to study the effects of porosity and temperature in all-vanadium redox flow battery with mass transfer and ion diffusion”, Sudipta De, Sustainable Energy Technology and Policies, A Transformational Journey, (Volume 2, pp-379-396),: Springer.
                              3. Sathisha H. M., and Dalal, A., 2015, “2D Unsteady Simulation of All-Vanadium Redox Flow Battery”, ASME Journal of Thermal Science and Engineering Applications, vol. 8(1), pp. 011019 (1-14).
                              Conference Proceedings
                              1. Sathisha H.M., and Dalal, A., A Three Dimensional Isothermal Stationary Numerical Model of All-Vanadium Redox Flow Battery, Paper No: FMFP2015-66, Proceedings of the Forty Second National Conference on Fluid Mechanics and Fluid Power, December 14-16, 2015, NITK Surathkal, Karnataka, India.
                              2. Sathisha, H.M., and  Dalal, A., A Lumped Thermal Model for The All-vanadium Redox Flow Battery, Paper No: IHMTC2015-613, Proceedings of the 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference,  December 28-31, 2015, Thiruvananthapuram, India.
                              3. Sathisha, H. M., and Dalal, A., 2014, 3D Unsteady Numerical Simulation of All-Vanadium Redox Flow Battery, Paper No: 528, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT Kanpur, India.
                              4. Sathisha, H.M., and  Dalal, A., 2D Transient Numerical Simulation Of All-vanadium Redox Flow Battery, Paper No: HMTC1300282, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
                              5. Sathisha, H.M., and Dalal, A., Simplified Mathematical Model To Evaluate The Performance of The All-vanadium Redox Flow Battery, Paper No: HT2013-17366, ASME Summer Heat Transfer Conference, July 14-19, 2013, Minneapolis, MN, USA.
                              6. Sathisha H.M, Surendra K.H, Shainath K and RavikiranKadoli (2011), Computational Fluid Dynamic Tools for the Performance Evaluation of Blow Pipe of a Pulse Jet Fabric Filter Baghouse, Proceedings of 27th National Convention of Environmental Engineers, Mangalore.
                              7. Sathisha H.M, P Kondaiah, RavikiranKadoli and AppuKuttan K.K (2010), Investigation on free vibration due to laminar flow of lubricant in a pipe, International Conference on Frontiers In Mechanical Engineering (FIME), NITK Surathkal.
                                 International Journals
                                1. A.Anand, L.J. Sudev and H.V. Lakshminarayana, (2012) “Determination of SIF for a Crack Emanating From a Rivet Hole in a Plate using Displacement Extrapolation Method”. Journal of Applied Sciences, 12: 1020-1025. 
                                2. A.Anand, and L.J. Sudev (2012) “Comparison of Plane Stress and Plane Strain Method for a Crack Emanating from Rivet Hole in a Plate and Approaching Another” IJMEMS, 5(2) July- December 2012, pp. 105-109
                                3. Akash.D.A, Anand.A, G.V.Gnanendra Reddy, Sudev.L.J, (2013) “Determination Of Stress Intensity Factor For A Crack Emanating From A Hole In A Pressurized Cylinder Using Displacement Extrapolation Method”, IJMET, Volume 4, Issue 2, March - April (2013), pp. 373-382, Journal Impact Factor (2013): 5.7731
                                4. Anand A.  Naveen Prakash G.V.  Nithyananda B.S. (2013) “Experimental investigation on properties of biodiesel extracted from pongamia oil”. International Conference on Technology Management and Green Environment- ICTMGE 2013
                                5. Anand A.  Naveen Prakash G.V.  Nithyananda B.S. (2013) “Performance Study on Diesel Engine using Different Blends of Pongamia Biodiesel” International Conference on Emerging Trends in Engineering and Technology ICETET- 2013
                                     International Conference
                                  1. A.Anand, L.J. Sudev  (2011)“Finite Element Analysis of a Crack Emanating From a Rivet Hole and Approaching Another” ICAMP-2011,  R.M.K Engineering College, Kavaraipettai, Tamilnadu, India
                                  2. A.Anand, L.J. Sudev  (2012)“Determination of SIF for a Crack Emanating From a Rivet Hole in a Plate using Displacement Extrapolation Method”, ICIMS-2012, Sastra University, Thanjavur, Tamilnadu, India
                                  3. A.Anand, L.J. Sudev (2012) “Comparison of Plane Stress and Plane Strain Method for a Crack Emanating from Rivet Hole in a Plate and Approaching Another” ICCTEM-2012, Vidyavardhaka College of Engineering, Mysore, Karnataka, India
                                  4. Anand A.  Naveen Prakash G.V. Nithyananda B.S. (2013) “Experimental investigation of pongamia and neem methyl esters as biodiesel on compression ignition engine” Journal International journal of mechanical engineering and robotics research (IJMERR)ISSN:2278-0149, Vol.2, No.4, Oct 2013.
                                  5. Anand A. Naveen Prakash G.V. Nithyananda B.S. (2013)  “Experimental Investigation of Diesel Engine using Different Blends of Mixed Pongamia-Coconut Biodiesel as Alternative Fuel” Journal International Journal of Engineering Research and Technology (IJERT), ISSN: 2278-0181, Vol. 2, Issue 7, July – 2013
                                  6. Anand A,  Naveen Prakash G.V. Nithyananda B.S. (2013) “Performance Study on Diesel Engine Using Different Blends of Neem Biodiesel” Journal International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622, Vol. 3, Issue 4, pp.1778-1781.  Jul-Aug 2013,
                                  7. Nithyananda B.S.  Anand A.  Naveen Prakash G.V. (2013) “Experimental Investigation Of Neem And Mixed Pongamia coconut Methyl Esters As Biodiesel On C.I Engine” Journal International journal of Mechanical Engineering and Technology (ijmet @ iaeme) ISSN 0976 – 6359 Vol. 4 Issue 4 , pp. 232-242. July - August (2013),
                                  8. Anand A. Naveen Prakash G.V.  Nithyananda B.S. (2014) “Experimental investigation on properties of biodiesel extracted from pongamia oil” Journal Midas Touch International Journal of Commerce, Management and Technology, ISSN: 2320 – 7787 Vol-2, No. 1, January-2014
                                  9. Anand.A, Darshan Bennur, Jeevan TP  (2014) “Stress Analysis of 2D-Cylindrical Pressure Vessel with Torispherical Endclosure”  SAE Technical Paper , 2014-01-0766, 2014, doi:10.4271/2014-01-0766. 2014
                                  10. Anand A. Naveen Prakash G.V.  Nithyananda B.S. (2019) “Performance and Combustion Analysis of Pongamia Biodiesel (PB20) as an alternative fuel for CI Engine” Applied Mechanics and Materials (Volume 895),  139-143, nov 2019
                                  Journal Publication
                                  1. Malavika.S, Namratha.M.Gowda, P.Srinag. (2018): “Thermal and aerodynamic design, fabrication and flow analysis of an axial compressor using innovative inverse technique”, International Journal of Current Engineering and Scientific Research (IJCESR), 5(5), 60-64.     
                                  Conference Proceedings
                                  1. P.Srinag, Arnab Roy, and Sivaramakrishna G (2013): “Effect of preheat and air-fuel ratio on the performance of a realistic gas turbine combustor- A computational study”, 23rd National Conference on I.C. Engines And Combustion, SVNIT, Surat during December 13-15, 2013
                                  2. P.Srinag, Arnab Roy, and T.N.Shridhar (2020): “Investigation of nonlinear interplay between imposed kinematics and induced aerodynamics of insect flight using sparse regression technique”, International Conference on Aviation Technology, Kolkata, organized by AeSI  during March 6-8, 2020
                                  Journal Publication
                                  1. BS Suresh, C Prithvi, Srinidhi Ramachandracharya (2020): “Modal analysis of FIAT Bogie of LHB railway coach”, Materials Today: Proceedings, Online: https://doi.org/10.1016/j.matpr.2020.03.817.
                                  2. BS Suresh, C Prithvi, Srinidhi Ramachandracharya (2020): “Static Analysis of LHB Railway Coach with FIAT Bogies”, International Journal of Research in Engineering, Science and Management. Vol 3, Issue 3(348-351).
                                  3. YC Niranjan, C Prithvi, BK Sridhara (2019): “Influence of S0 Type of Addendum Modification on Sliding Performance of Spur Gears”, IOP Conference Series: Materials Science and Engineering. Vol 624 , Issue 1(012026).
                                  4. Karthik Hebbar A, C Prithvi, Srinidhi Ramachandracharya (2019): “Analytical modeling of railway suspension system using MATLAB simulink”, International Journal of Recent Technology and Engineering. Vol 8 , Issue 1S2(164-168).
                                  5. Y Shriraj Rao, M S Bobji, Prithvi C, Sanjeev Kumar (2017): “Design And Development of Finger Friction Tribometer”, International Journal of Engineering Research in Mechanical and Civil Engineering. Vol 2 , Issue 5(922-929).
                                      Conference Proceedings
                                  1. Suresh B.S, Prithvi.C, Rithesh H B, Tejas K M (2020): “Modal Analysis of Indian Railway Linke Hofmann Busch (LHB) Coach with FIAT Bogies”, International Conference  on International Conference on Advanced Light-weight Materials and Structures, CMR Technical Campus, Hyderabad during 6th & 7th March, 2020.
                                  2. C Prithvi, Karthik Hebbar A, Srinidhi Ramachandracharya (2019): “Vibration Analysis Of Railway Wagon Suspension System for Improved Ride Quality Using Matlab Simulink”, International Conference  on Production And Industrial Engineering (Cpie-2019), Dr B R Ambedkar National Institute Of Technology, Jalandhar during 08-10 June, 2019.
                                  3. Sunith Babu L Rajesh Mathivanan N, Prithvi C, Ranjith K (2017): “Damage Resistance Characteristics of woven E-glass/Epoxy Composite Laminates Subjected to Drop Weight Impact”, International Conference on Composite Materials and Structures, IIT Hyderabad during December, 2017
                                  4. Prithvi C, Sanjeev Kumar (2017): “Brake Drum Analysis Using Numerical Simulation”, International Conference on Advances in Mechanical Engineering Sciences, PESCE, Mandya during 21-22 April, 2017
                                  5. Nandish R.V, Sadananda Megeri, Prithvi C, S. Paul Vizhian, S. Ramachandra (2010):Evaluation of Deformation Characteristics Of Non-Linear Materials In Quasi-Static Regime”, International Conference on Materials, Mechanics and Management, College of Engineering, Trivandrum, Kerala, India, 14th -16th January 2010.
                                  6. Prithvi C, Babureddy, Harish K, Girish H, (2010) “Sandwich PU Foam Behavior for Dynamic Loading using Guided Drop Mass Impact”, in National Conference “NCASHME” on 23rd and 24th April 2010, in Shirdi Sai College of Engineering , Annekal, India,
                                  Journal Publication
                                  1. Amar Chandra C, Prasanta Kumar Samal, “Experimental determination of mode shapes of beams by roving impact test”, MaterialsToday Proceedings, available online 2020.
                                  2. Shrinivas Hebbar A, Shrinidhi D Kulal, Tajmul Pasha, Prasanta Kumar Samal, K Gourav,  “Numerical and Experimental Investigation of Vibration Isolation of Three Storied Building Structure using Tuned Mass Damper”, International Journal of Recent Technology and Engineering (IJRTE), Vol. 8 (2019), 141-149.
                                  3. H. R. Kemparaju, Prasanta Kumar Samal, “Experimental Investigations on Free Vibration of Plates”, Journal of Testing and Evaluation, Vol. 47 / No. 4 / 2019, 2750-276.
                                  4. R. K. Sabat, P. K. Samal, Muzzamil Ahamed S, “Effect of strain path on the evolution of microstructure, texture and tensile properties of WE43 alloy”, Materials Science and Engineering A, 715 (2018) 348-358.
                                  5. P. K. Samal, PK Malik, A Babu, GC Shanthakumar, “Fabrication and Experimentation of a Cantilever Beam Based Piezoelectric Actuator and Sensor for Vibration Energy Harvesting”, Applied Mechanics & Materials, 592-594 (2014), 2297-2302
                                  6. Prasanta Kumar Samal, Pramod Kumar Mallik, Premanjan Sethy, Rudra Pratap, “Modelling, Fabrication and Characterization of a Piezoelectric Vibration Energy Harvester”, International Journal of Engineering Research & Technology, 3 (2014), 397-402
                                  7. Prasanta Kumar Samal, “Design, Fabrication and Characterization of a Piezoelectric Ultrasonic Transducer”, International Journal of Mechatronics and Manufacturing Technology, Vol-1, Issue-2 (2016), pg13
                                  8. Kemparaju HR, Prasanta Kumar Samal, “Detailed Numerical Study of the Free Vibration Analysis of Beams”, Advances in Civil and Structural Engineering, Vol-2, Issue-2 (2017), 39-47
                                  9. Vinodkumar, Prasanta Kumar Samal, Tajamul Pasha, “Design and Analysis of LPG Weighing Machine for Household Application”, Journal of Petroleum and Petrochemical Engineering, Vol-1, Issue-1 (2016)
                                  10. Dushyanth Kumar M. V., Prasanta Kumar Samal, “Design and Analysis of Gravity Roller Conveyor System for Moped Engine Assembly Line, Vol-2, Issue-3 (2017), 1-6
                                  International Conference
                                  1. Prasanta Kumar Samal, B Murali, Tajmul Pasha, “Finite Element Analysis of Connecting Rod of IC Engine”, International Conference on Mechatronics and Mechanical Engineering (ICMME 2015) ,  Singapore, MATEC Web of Conferences.
                                  2. Pramod Kumar Malik, Prasanta Kumar Samal, Amulya Ratna Swain, “Jacobian Based Kinematic and Static Analysis of Over-Constrained Mechanisms with Prismatic and Revolute Joints”, International Conference on Mechanism and machines, IIT, Roorkey (2013).
                                  3. Prasanta Kumar Samal, Murali B, “Design and Finite Element Analysis of Resilient Wheel with Honeycomb Structure”. International Conference on Mechanical, civil, Electronics & Communication and Computer Science Engineering, Bangalore (2016).
                                  4. Prasanta Kumar Samal, Puneeth Kumar S, “Experimental Stress Analysis and Finite Element Analysis Approach to Study the Behavior of Shaft under Combined Loading”, International Symposium on Advanced Materials for Engineering Applications, Mysore (2017).
                                  5. Ajith Kumar, Prasanta Kumar Samal, “Design And Development Of In-Situ Compression Set Up”, International Symposium on Advanced Materials for Engineering Applications, Mysore (2017).
                                  6. Shrinivas Hebbar A, Shrinidhi D Kulal, Tajmul Pasha, Prasanta Kumar Samal, K Gourav,  “Numerical and Experimental Investigation of Vibration Isolation of Three Storied Building Structure using Tuned Mass Damper”, International Conference on Advances in Mechanical Engineering & Management (ICAMEM – 2019) organized by the Dept. of Mech. Engg., Vidyavardhaka College of Engineering, Mysuru during March 22 – 23, 2019.
                                  7. Rohith N,  Prasanta Kumar Samal, Charanaraja Naik, “Experimental investigation on free vibration analysis of composite plates”, International Conference on Advances in Mechanical Engineering & Management (ICAMEM – 2019) organized by the Dept. of Mech. Engg.,  Vidyavardhaka College of Engineering, Mysuru during March 22 – 23, 2019.
                                  8. Ejaz Ahamed, Prasanta Kumar Samal, Suresh B.S, Kemparaju. H.R, “Artificial Neural Network based Prediction of Cutting Parameters from Tool Vibration and Forces”, International Conference on Emerging Trends for Smart Grid Automation and Industry 4.0 (ICETSGAI4.0 2019)  organized by Birla Institute of Technology, Mesra, Ranchi during 5th December 2019 to 7thDec 2019.
                                  9. Amar Chandra C, Prasanta Kumar Samal, “Experimental Determination of Mode Shapes of Beams by Roving Impact Test”, 2nd International Mechanical Engineering Congress (IMEC) – 2019 organized by National Institute of Technology, Tiruchirappalli during 29th November 2019 to 1st Dec 2019.
                                  National Conference Papers
                                  1. Shivaraj Dharennavar, Prasanta Kumar Samal, B.Suresh, " Design and Fabrication of Fixture for Shear Testing of Composite Materials in UTM", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                  2. Niranjan A S, Prasanta Kumar Samal, " Design and Analysis of the Main Assembly Jig for a Multirole Civilian Aircraft’s Main Door" , National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                  3. Prasanta Kumar Samal, Hulagappa B, Sujit Sali, Tajamul Pasha " Effects of Fillers on Mechanical Properties and Fracture Toughness of E-Glass Fibre Epoxy Composite ", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                  4. Tajamul Pasha, Arjun V P., Prasanta Kumar Samal, " Use of Drill Jig in Aircraft Assembly Process", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                  5. Gowda Harish Rama, Prasanta Kumar Samal, " Static Stiffness Analysis of Spindle Assembly of CNC Lathe Machine", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                  6. Lakshmikantha K S, Murali B, Prasanta Kumar Samal, " Design of Wheels and Chassis for Throwable Robot used for 3D Mapping", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                  7. Vinodkumar, Tajamul Pasha, Prasanta Kumar Samal, " Concept Generation and Selection of LPG Weighing Machine for Household Application", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                  Journal Publication
                                  1. Vikram Athreya V, N K S Rajan, Manjunatha A and H R Purshothama, “An Experimental Study on Kerosene Based Pulse Detonation Engine", International Journal of Mechanical Engineering & Technology (IJMET), Volume:5, Issue:9, Pages:31-35.
                                  Conference Proceedings
                                  1. Vikram Athreya V, N K S Rajan, Manjunatha A and H R Purshothama, “An Experimental Study on Kerosene Based Pulse Detonation Engine ", Proceedings of the 2nd International Conference on Current Trends in Engineering and Management (ICCTEM), 2014.
                                  2. Abhishek Dhotre, Vikram Athreya V, “Design and Development of Robotic Vision Inspection Cell for Fuel Injection Pump”, National Conference on Emerging Trends in Mechanical Engineering for UG/PG students and Research Scholars (NCETMEC), 2019
                                  Journal Publication
                                  1. Rajath Mallya P1, Rajath Alva K2, N Seshaprakash*, M Vijayakumara4,
                                  2. N S Srikanth5, N V Raghavendra6Combustion Noise Reduction of a Compression Ignition Direct Injection Engine by Optimizing the Fuel Injection Equipment” ijettjournal, ISSN: 2231-5381.2017
                                  3. Harsha B T1, G S Mayur2, Indresh D R3, N Seshaprakash4,Tajmul Pasha5, N S Srikanth6Noise Reduction by Optimization of HPP configuration and Injection Timing in a Direct Injection CI Engine” ijettjournal, ISSN: 2231-5381,2017
                                  4. Aditya S S#1, Karthik M Prabhakar#2, Girinath S Bhatt#3,Manjunatha H V#4, N Seshaprakash5*, N S Srikanth6Study of the effect of nozzle configuration on Noise level in CI engines”, ISSN: 2231-5381,2017
                                    Conference Proceedings
                                    1. Srikanth N S ,Arun M, Prasad Krishna,M.K Nagaraj ”Conjugate Heat transfer Analysis of  hexagonal Shaped micro channel for chip cooling”,5th international and 41st National conference on fluid Mechanics and fluid power December 12-14,2014,FMFP-H-110.
                                    Journal Publication
                                    1. Rutvij Rajiv Naik, Sunil Gaekwad (2015): “Design of a Submerged Cooling System for a Vertical Axis Milling CNC Machine”, International Journal of Engineering and Innovative Technology (IJEIT), Volume 5, Issue 1, July 2015
                                      Conference Proceedings
                                    1. Naveen M S, Sunil S R Gaekwad (2019): “Evaluation of Surface Roughness in Fused Deposition Modelling Parts: A Review”, International Conference on Advances in Mechanical Engineering & Management (ICAMEM – 2019), 22 & 23 March 2019
                                    2. Rakesh K. M, Sunil Gaekwad (2016): “Modal Analysis of Rear Dumper Cabin to Study Effect of Stiffener Addition to Cabin Panels Susceptible for vibration” National Conference on Mechanical, Materials and Manufacturing Engineering, 2016
                                    Journal Publications
                                    1. Sharath Chandra N., Raghavendra, N. V., Shekar, G. L., & Khan, P. M. A. (2019). Acquisition of Technological Capability by Firms in the Aerospace Cluster of Bengaluru. The Asian Journal of Technology Management12(1), 58-69.
                                    2. Sharath Chandra, N., Raghavendra, N. V., & Bharadwaj, S. V. (2016) Online Survey Portal for Collection of Data for Accreditation: A Case Study from an Engineering College in South India.
                                    3. Sharath Chandra N. Shekar, G. L., & Raghavendra, N. V. (2015). Aerospace cluster of Bangalore: Can the SMEs take up the challenges?. Journal of Asian Business Strategy5(9), 191.
                                    4. Sharath Chandra N., Shekar, G. L., & Raghavendra, N. V. Aerospace Cluster of Bangalore: Current Scenario and Future Prospects. 2nd International Conference on Current Trends in Engineering and Management, ICCTEM-2014, 17 – 19, July 2014, Mysore, Karnataka, India
                                    5. Achutha, M. V., GK, N. & Sharath Chandra N., (2014). Concept Design and Analysis of Multipurpose Farm Equipment. IJIRAE) ISSN, 2349-2763.
                                    6. Achutha, M. V. Kesavanth B G., Sharath Chandra, N., (2014). Concept Design and Analysis of Low Cost O-Ring Assembly Machine for Adjustable Ball Race Assembly.
                                    Conference Proceedings
                                    1. Sharath Chandra N., Raghavendra, N. V., & Shekar, G. L. (2016, July). Aerospace industry of India: Analysis of strengths, weaknesses, opportunities and threats. In 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE)(pp. 512-516). IEEE.
                                      Book Chapters
                                    1. Sharath Chandra N., Shekar, G. L., & Raghavendra, N. V. (2017, September). Offset Policy and Its Impact on Aerospace Industry in India. In EAI International Conference on Technology, Innovation, Entrepreneurship and Education(pp. 241-247). Springer, Cham.
                                    1. Mohan, Balaji, Wenming Yang, and Siaw kiang Chou. "Fuel injection strategies for performance improvement and emissions reduction in compression ignition engines- A review." Renewable and Sustainable Energy Reviews 28 (2013): 664-676.
                                    2. Broatch, A., et al. "Impact of the injector design on the combustion noise of gasoline partially premixed combustion in a 2-stroke engine." Applied Thermal Engineering 119 (2017): 530-540.
                                    Conference Proceedings
                                    1. Harsha B T, G S Mayur, Indresh D R, N Seshaprakash,Tajmul Pasha, N S Srikanth. Noise Reduction by Optimization of HPP configuration and Injection Timing in a Direct Injection CI Engine” National Conference on Advances in Mechanical Engineering Science (NCAMES-2016).
                                    Journal Publication
                                    1. K.R Mrinaland A. Samad (2018), “Performance prediction of kinetic and screw pumps delivering slurry. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 232(7),898-911.
                                    2. K.R. Mrinal and A. Samad (2017), Leakage flow correlation of a progressive cavity pump delivering shear thinning non-Newtonian fluids. International Journal of Oil, Gas and Coal Technology, 16(2), 166-186.
                                    3. K.R. Mrinal., M. H., Siddique and A. Samad. (2018). Performance Prediction of a Centrifugal Pump Delivering non-Newtonian Slurry, Particulate Science and Technology, 36(1), 38-45.
                                    4. K.R. Mrinal., M. H., Siddique and A. Samad. "A Transient 3D CFD Model of a Progressive Cavity Pump." In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, pp. V009T24A009-V009T24A009, Volume 9 American Society of Mechanical Engineers, 2016.
                                    5. M. H., Siddique.,K.R. Mrinal., and A. Samad. Optimization of a centrifugal pump impeller by controlling blade profile parameters." In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, volume 2c, pp. V02CT45A009-V02CT45A009. American Society of Mechanical Engineers, 2016
                                    Conference Proceedings
                                      1. K.R.Mrinal, W.K.Tungoe and C.L.Kithan (2018), “Numerical Analysis of Horizontal Axis Wind Turbine Using Q-Blade, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP) December 10-12, 2018, IIT Bombay, Mumbai, India 
                                      2. K.R.Mrinal, S.Suraj and S.G. Nihal (2018), “A Study of Materials and Manufacturing Techniques for the Wind Turbine Blades”,International Conference on Advances in Manufacturing Technology (ICAMT), Chennai Institute of Technolog, Chennai, India. 
                                      3. K.R. Mrinal, M. H., Siddique and A. Samad (2016), “A Transient 3D CFD Model of a Progressive Cavity Pump”, Turbomachinery Technical Conference & Exposition presented by the ASME International Gas Turbine Institute, Seoul, South Korea.
                                      4. K.R. Mrinal and A. Samad (2014), “CFD Simulation of Flow Through Progressive Cavity Pump”, Fifth International Conference on Fluid Mechanics and Fluid Power, IIT Kanpur, Kanpur, India.
                                      5. K.R. Mrinal and A. Samad (2012), “Numerical Modelling of Flow through Progressive Cavity Pump – A review”, Proceedings of the second International Conference on Drilling Technology, IIT Madras, Chennai, India.
                                      6. K.R Mrinal and V.Kalaiselvam (2012), “In-Cylinder Air Motion Studies in IC Engine using CFD”, International conference in Magna on Emerging Engineering Trends (ICMEET2K12), Magna College of Engineering, Chennai, India.
                                      7. M.H. Siddique, K.R. Mrinal and A. Samad (2016), “Optimization of a Centrifugal Pump Impeller by Controlling Blade Profile Parameters”, Turbomachinery Technical Conference & Exposition presented by the ASME International Gas Turbine Institute, Seoul, South Korea.
                                    Journal Publications 
                                    1. Manoj. G,Ravikumar Beeranur, K. R. Prakash(2018):”Designing a software test automation framework for windows application using coded  UI Visual Studio tool and page object design”, i-Manage’s Journal on software engineering, 12(4), 1-6
                                    2. K.R.Prakash, Ravikumar Beeranur, Pradeep kumar.(2017): “ Development of Etch Surface on EUS Needle”,  International Journal of Research ,   04 (08), 786-791.
                                    3. Ravikumar Beeranur, Sachin R.S (2015):,” Design and Automation of HSU Assembly Station By Poko Yoke”, International  Journal of Engineering Research and Technology ( IJERT), Vol. 4  (06),984-990.
                                    4. H.S. Mohan,T.P. Bharathesh, K.V. Sreenivas Rao, Ravikumar Beeranur (2015):“Laser Assisted Brazing of Ceramic and Titanium alloy using Ag-Cu Filler material”,  Journal of Applied Mechanics  and Materials, Trans Tech Publication Switzerland, 766-767, 751-756.
                                    5. Ravikumar Beeranur, Kiran K Waghmare, Ramesh kumar Singh (2014): “ Characterization of Vacuum Brazing of SS 304 and Alumina ceramic with Active Brazing Alloy” , AMME,  Procedia Material Science,  5, 969-977.
                                    Conference Proceedings
                                    1. Ravikumar Beeranur, Kiran K Waghmare, Ramesh kumar Singh (2013):Characterization of Vacuum Brazing of Ti6Al4V And Alumina With Cu-Ag Brazing Alloy via Substrate-Induced Reactive Mechanism”, ASME MSEC Conference, University of Wisconsin, Madison,USA, 2013
                                    2. Ravkumar Beeranur, H.S. Mohan(2013): “Laser Assisted Brazing of Ceramic and Titanium alloy using KM72 filler materials”, proceedings of International conference emerging trends in engineering and technology,  IC(ET)2sep 2013, Munnar, kerala, India, vol (1),PP 184-189
                                    3. Ravikumar Beeranur, Kiran K Waghmare, Ramesh kumar Singh (2014):“ Characterization of Vacuum Brazing of SS 304 and Alumina ceramic with Active Brazing Alloy” proceeding of International conference on Advances in Manufacturing and Materials Engineering, (AMME 2014), ,  NITK Surathkal, Karnataka, India. 27th -29th march 2014
                                    Journal Publication
                                    1. Yogesha, K. K., Kumar, N., Joshi, A., Jayaganthan, R., & Nath, S. K. (2016). A Comparative study on tensile and fracture behavior of Al–Mg alloy processed through cryorolling and cryo groove rolling. Metallography, Microstructure, and Analysis, 5(3), 251-263.
                                    2. Joshi, A., Kumar, N., Yogesha, K. K., Jayaganthan, R., & Nath, S. K. (2016). Mechanical properties and microstructural evolution in Al 2014 alloy processed through multidirectional cryoforging. Journal of Materials Engineering and Performance, 25(7), 3031-3045.
                                    3. Yogesha, K. K., Joshi, A., Kumar, N., & Jayaganthan, R. (2017). Effect of cryo groove rolling followed by warm rolling (CGW) on the mechanical properties of 5052 Al alloy. Materials and Manufacturing Processes, 32(12), 1336-1344.
                                    4. Joshi, A., Yogesha, K. K., Kumar, N., & Jayaganthan, R. (2016). Influence of annealing on microstructural evolution, precipitation sequence, and fracture toughness of cryorolled Al–Cu–Si Alloy. Metallography, Microstructure, and Analysis, 5(6), 540-556.
                                    5. Joshi, A., Yogesha, K. K., & Jayaganthan, R. (2017). Influence of cryorolling and followed by annealing on high cycle fatigue behavior of ultrafine grained Al 2014 alloy. Materials Characterization, 127, 253-271.
                                    6. Yogesha, K. K., Joshi, A., & Jayaganthan, R. (2017). Fatigue behavior of ultrafine-grained 5052 Al alloy processed through different rolling methods. Journal of Materials Engineering and Performance, 26(6), 2826-2836.
                                    7. Yogesha, K. K., Joshi, A., Raja, A., & Jayaganthan, R. (2019). High-cycle fatigue behaviour of ultrafine grained 5052 Al alloy processed through cryo-forging. In Materials Processing Fundamentals 2019 (pp. 153-161). Springer, Cham.
                                    8. Kalavathi, G. K., Somashekhar, M., Vasundhara, M. G., & Yogesha, K. K. (2019). Analytical Study of Roughness on Tilted Pad Thrust Slider Bearing Improved by the Boundary Slippage. In Applied Mechanics and Materials (Vol. 895, pp. 70-75). Trans Tech Publications Ltd.
                                    Journal Publications
                                      1. Anusha Manur, Maitreyee Marathe, Ashray Manur, Abhishek Ramachandra, Shamsundar Subbarao, Giri Venkataramanan, “Smart Solar Home System with Solar Forecasting” ,Published in: 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE2020), Cochin, India.  ISBN Information: Electronic ISBN: 978-1-7281-4251-7.USB ISBN: 978-1-7281-4250-0. Publisher: IEEE
                                      2. M. A. Sangamesh, K. Pushpalatha, G. L. Shekar, and S. Shamsundar, “Preparation and Characterization of  Nanocrystalline CuS Thin Films for Dye-Sensitized Solar cells”, ISRN Nanomaterials Volume 2013, Article ID 829430, http://dx.doi.org/10.1155/2013/829430.
                                       Conference/Poster Publications
                                    1. S. Shamsundar, Dhananjaya K N, P. Sowmya “Kitchen Waste Biogas Plant-an Innovative Technology for Waste Management; A Case Study of 60 kg Per Day Biogas Plant at Postal Training Centre, Mysore, India” Published in proceedings of International Conference on Biological Waste as Resource with a Focus on Food Waste, BWAR-2014, Hong Kong.
                                    2. Shamsundar Subbarao, Dhananjaya K N, “Decentralized-Biodiesel Plant: A Viable Business Opportunity for Rural Areas”, Green Summit-2014, Bangalore, India.(Poster)
                                    3. Shamsundar Subbarao, Padmavathi P Dhananjaya, K N Sowmya, “Aranyaka –Ecofriendly and Sustainable Antipoaching Unit at Bandipur”, Green Summit-2014, (5/6/2014 to 7/6/2014) Bangalore, India.(Poster)
                                    4. Shamsundar Subbarao, R G Nagaraj, Dhananjaya, K N “Biogas Plant at Mysore Zoo: A case study of sustainable waste management and Energy Conservation”, Green Summit-2014, Bangalore, India.(Poster).
                                    5. M R Mahima , K C Manjunath , S Shamsundar, “Evaluating the Effluent Quality of Biodigesters in Mysore City”, Published in proceedings of the 4th International Conference on Solid Waste Management (4th ICON SWM) Hyderabad, India.
                                    6. Shamsundar Subbarao, Dhananjaya K N, “Biodiesel plant: A viable Cottage Industry for Rural Areas presented at National Conference on Future of Rural Chemical Industries in India” Proceedings of FCRII-2014, Mahatma Gandhi Institute for Rural Industrialization (MGIRI), 16-01-2014 to 17-01-2014,Wardha, India.
                                    7. Shamsundar Subbarao, Jagannatha V, Dhananjaya K N, “Bio-waste to Energy; Projects implemented by NIE-CREST” Proceedings of ICONSWM-2012, 31-07-2012 to 02-08-2012, Infosys, Mysore.
                                    8. Shamsundar Subbarao, Dhananjaya K N, “Sustainable Energy and waste management: A good practice at Administrative Training Institute [ATI], Mysore” Proceedings of the National Conference on Thrust Areas in Engineering [NCTAE-2012], 20 to 21st January 2012, Global Academy of Technology, Bangalore
                                    9. Shamsundar Subbarao, Vaishaali Balasundaram, Dhananjaya K N, “Conversion of crude glycerol to soap with different ratios of lye”, Biofuels Insights-2012, 10-08-2012 to 12-08-2012, KSBDB, Karnataka Chitrakala Parishad, Bangalore.
                                    10. Shamsundar Subbarao, Dhananjaya K N “Good practices on biogas from Organic/Kitchen Waste as a Sustainable biofuel: projects implemented by NIE-CREST”, Biofuels Insights-2012, 10-08-2012 to 12-08-2012, KSBDB, Karnataka Chitrakala Parishad, Bangalore.
                                      Research, Demonstration and Field level  projects
                                      1. Microgrid  Partnership   for sustainable development , R& D Project , Wisconsin Ideas ,with Prof.Giri Venkataramanan , University of Wisconsin Madison–  From 2015 to 2019.
                                      2. Water ,Sanitation and Hygiene project ( IHU WASH) in collaboration with NIUA( National Institute Of Urban affairs) , MCC ( Mysore city corporation )- 2018-2019. Establishment of WASH Lab @ NIE, Mysuru.
                                      3. Principle Investigator, Biosensor Paper Project – for detection of pesticides in water together with Sentinel Group, McMasters University, Canada. 2010 to 2012, (INR 690,000).
                                      4. Co-Investigator, Preparation and Characterisation of CIGS nanomaterials for Photovoltaics, in association with Vision Group on Science and Technology (VGST), Department of Science and Technology, Government of Karnataka, 2011 to 2014.
                                      5. Coordinator, District Biofuel Information and Demonstration Centre for dissemination, research and development of Biofuels in Mysore District, Karnataka State Biofuel Development Board, Government of Karnataka, Bangalore, 2011 to till date ( on going)
                                      6.  Coordinator  SEAN-DEE ( south east asian network on Disaster & Environmenal engineering) project  sponsored by DAAD, Germany and involving five international universities viz. Uni. Of Kassel, Germany, Nepal, and 3 universities from Bangladesh   (2011 to 2014).
                                      Some of the major Renewable Energy & Sustainable Technology project implemented/currently in progress
                                      1. Installation of Aerobic Bio composters in schools , hostels, institutions, gated communities, apartments, houses.
                                      2. Pilot   Kitchen waste Biogas  plants projects   at Port villa effate island, Espiritu Santo island , Vanuatu Islands  in the  South pacific.(2018)
                                      3. Installation of 1000kg/day Biogas plant at Mysore Zoo ( BARC , IndiaTechnology).
                                      4. Installation Of 100Kg/Day input Kitchen Waste Biogas Plant’s  at , Pramathi school, Mysore, HUL Mysuru,  ATI ( Administrative Training  Institute, Mysore)  ,  Postal Training centre, Karwar Naval base, NIE Boys Hostel, Mysuru,  and many more. 
                                      5. Installed more than 100 Nos, Small Kitchen waste Biogas Plants  to homes including houses of  Mr.Randeep, Deputy Comissioner , Mysuru, Mrs.Suma shamsundar, Smt. Manjula guruprasad, Smt. Sahikala, Smt. Radha Ganesh , and villages near Bidadi under BOSH CSR project   and many more.
                                      6. IHU – WASH –( Innovation  Hub for Urban Water ,Sanitation and Health) Project , IHU-WASH Chair @ NIE, Mysore. A Project in collaboration with Mysore city corporation & NIUA( National Institute Of Urban Affairs), New Delhi, sponsored by USAID
                                      7. Renewable energy integrated Microgrids project to remote villages in co-operation with University of Wisconsin, Madison, USA.(2017)
                                      8. Rainwater Harvesting Design/Scheme to Prestigious Mysore Palace, Mysore, India  , Mysore silk factory, ATI, AIISH ,ZP Mysuru,  and many houses and Institutions.
                                      9. Fuel Efficient  Biomass Cook Stoves at Chamundi hill ,Manthralaya, and Many Villages around Karnataka.
                                      10. Establishing 185Kw, 100Kw, 10Kw and 30Kw solar  grid tied and off grid PV system at NIE  main campus, Boys hostel and Library and many more .
                                      11. Design and Implementation of ARANYAKA –  Sustainable, Renewable Energy based Anti poaching Unit at Bandipur National Park( 2012), Biodiel to vehicle.
                                      12. Design of Ecofriendly Anganawadi kendras to Tribal hamlets of Periyapatna taluq, Mysuru, India
                                      13. Coordinator SEAN-DEE ( South East Asian Network on Disaster & Environmental engineering) project  sponsored by DAAD, Germany. SEAN DEE is  a network of  five international universities viz. Uni. Of Kassel, Germany, , NIE Mysuru, BVB Mysuru, Tribhuvan University Nepal, and 2 universities from Bangladesh . He  has facilitated visit  of more than 30 students and 4 faculty members of NIE , Mysuru  to University of Kassel , Germany with  DAAD financial assistance of 100Euros per student for a 10 day workshops  &  long term  sponsorships to students.
                                      14. Played  a major role  in facilitating  “German Advisory Council On Global Change “ (WBGU)  a 9 member high level delegation from Germany  to his institute in the 2008. 
                                      15. Traveled extensively in India and abroad viz. USA, Germany, Vanuatu , Fiji, Srilanka, Bangladesh, Nepal, Hongkong,  France, Austria, China, Dubai, and many more
                                      16. Established a good network with some of the  International   Universities/ Institutions  viz. University of Wisconsin, Madison, USA on Microgrids, Disaster & Environmental Engineering, University of Kassel, Germany, Tribhuvan university, Nepal and many more.  
                                      17. Co-ordinator Mysore District Biofuel I&D centre, Govt. Of Karnataka  at NIE  Mysuru which hosts a 50liter /batch Biodiesel production  unit at NIE, Mysore.
                                      Journal Publication
                                      1. Tajamul Pasha, Sandesh S Nayak, Vishal T.S, Vinay Simha A, “An Investigation of the   Mechanical and Tribolological properties of   Alluminium Alloy Series with SiC Metal     Matrix Composites; “International Research Journal of Engineering and Technology-      Vol-07, issue 2 Feb 2020. 
                                      2. Tajamul Pasha, Sandesh S Nayak “Modelling of Robotic Waiter using Fire Bird V Robot. Journal of Mechanical Robotics-2020
                                      3. Shrinivas Hebbar A, Shrinidhi D Kulal, Tajamul Pasha, Prasanta Kumar Samal, K Gourav, “Numerical and Experimental Investigation of Vibration Isolation of Three Storied Building Structure using Tuned Mass Damper”, International Journal of Recent Technology and Engineering   (IJRTE), Vol. 8 (2019), 141-149.
                                      4. Tajamul Pasha, Rakesh.M, Suvarna Karthik, Thanmay “Design and Fabrication of Base stand and Controlling the speed of Belt conveyor”   International Journal of Robotics and Autonomous Systems-2, Issue-3-2018.
                                      5. Tajamul Pasha, Hulagappa B, Tejaswi S, SM Khydas, Nizamusheen A, Rohan S “Characterization of Mechanical and Fracture, Toughness, of Hybrid Composites with Caco3nFillers.” Journal of Computer Aided Manufacturing and Automation Vol-2 Issue 3-2017
                                      6. Harsha B.T, G.S Mayur, Tajamul Pasha, N. Seshaprakash,”Noise Reduction by Optimization of HPP configuration and Injection timing in a direct Injection CI Engine.” International journal of Engineering trends and Technology-2016
                                      7. Vinodkumar, Prasanta Kumar Samal, Tajamul Pasha, “Design and Analysis of LPG Weighing Machine for Household Application”, Journal of Petroleum and Petrochemical Engineering, Vol-1, Issue-1 (2016)
                                      8. H.B Sujith Sali, Tajamul Pasha, “Effects of Fillers on Mechanical Properties and Fracture Toughness of E-Glass Fibre Epoxy Composite” Journal of Automotive Engineering and Technology-1 Issue-2-2016.
                                      9. B.Hulugappa, Tajamul Pasha,K.M Ramakrishna,”Condition Monitoring of Induction Motor, Ball bearing using Monitoring     techniques.” International Journal of Scientific and Research Publications-2(11)Vol-1, No.1-2012
                                      10. Puneeth N, Tajamul Pasha, Harish.B, Satheesh.J, “Wear and Corrosion Behaviour of Nitriding on Ferrous Metals to Reduce Corrosion.” Internation Journal of Emerging Technology and Advanced Engineering Vol-4, Issue 5-2014
                                      11. J. Satheesh, Tajamul Pasha, Harish , T.Madhusudhan “Optimal Machining Conditions for Turning of ALSiC Metal Matrix Composites using ANOVA” International Journal of Innovative Research in Science Engineering and Technology Vol-2 Issue 11-2013 
                                        Conference Proceedings International Conference
                                        1. Shrinivas Hebbar A, Shrinidhi D Kulal, Tajamul Pasha, Prasanta Kumar Samal, K Gourav,  “Numerical and Experimental Investigation of Vibration Isolation of Three Storied Building Structure using Tuned Mass Damper”, International Conference on Advances in Mechanical Engineering & Management (ICAMEM – 2019) organized by the Dept. of Mech. Engg., Vidyavardhaka College of Engineering, Mysuru during March 22 – 23, 2019.
                                        2. Prasanta Kumar Samal, B Murali, Tajamul Pasha, “Finite Element Analysis of Connecting Rod of IC Engine”, International Conference on Mechatronics and Mechanical Engineering (ICMME 2015) ,  Singapore, MATEC Web of Conferences.   
                                        3. B. Hulugappa, Tajamul Pasha, K.M Ramakrishna, “Condition Monitoring of Induction Motor Ball Bearing using rotating Member, International Conference on Futuristic Automation and Control Engineering(ICFACE)-2012
                                        National Conference Papers
                                        1. Prasanta Kumar Samal, Hulagappa B, Sujit Sali, Tajamul Pasha " Effects of Fillers on Mechanical Properties and Fracture Toughness of E-Glass Fibre Epoxy Composite ", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                        2.  Tajamul Pasha, Arjun V P., Prasanta Kumar Samal, " Use of Drill Jig in Aircraft Assembly Process", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                        3. Vinodkumar, Tajamul Pasha, Prasanta Kumar Samal, " Concept Generation and Selection of LPG Weighing Machine for Household Application", National Conference on Mechanical, Materials, and Manufacturing Engineering (NCMMME-2016), Mysore.
                                        4. Harsha B.T, G.S Mayur, Tajamul Pasha, Noise Reduction by optimization of HPP Configuration and Injection timing in a Direct Injection CI Engine.” National Conference on Advances in Mechanical Engineering Science-(NCAMES-2016.)
                                        5. Sudarshan.M, Tajamul Pasha,Vinod Kumar “Determination of Velocity Profile of a Fluid Flowing through a Duct, “ National Conference on Mechanical, Materials and Manufacturing Engineering-( NCMMME-2016), Mysore.
                                        1. Pragnya Pradeep, Dr. Aravindrao M. Yadwad2 et.al published “Influence of Various Sintering Processes on Cenosprhere added   Copper Composite”, Test Engineering and Management, January - February 2020 ISSN: 0193-4120 Page No. 5888 - 5894 (Published by: The Mattingley Publishing Co., Inc.)
                                        2. Mr. Mahesh G. Emmi1*, Dr. Aravindrao M. Yadwad2, Dr. Vinay V.Kuppast3 , Dr. Sampanna M4, Survey On Bagasse Cogeneration In Sugar Plants Of North Karnataka, International Journal of Engineering & Technology, 2018. 7 (4.5) (2018) 621-624, Website: www.sciencepubco.com/index.php/IJET
                                        3. Mahesh G. Emmi* , Dr. Aravindrao M. Yadwad, Dr. Vinay V.Kuppast “Performance evaluation of  bagasse unit in a sugar industry; A review” International Journal of Engineering Sciences & Research Technology[ IJESRT], ISSN: 2277-9655 [Emmi* et al., 6(6): June, 2017], Impact Factor: 4.116 , http: // www.ijesrt.com 
                                        4. Basavaraj Talikoti1, Dr. S. N. Kurbet2, Dr. V. V. Kuppast 3, Arvind M. Yadwad4 ”Modal analysis   of a 2-cylinder crankshaft using ANSYS” Int. Journal of Engineering Research and Application,  ISSN: 2248-9622, Vol. 5, Issue 12, (Part - 1) December 2015, pp.26-30www.ijera.com.
                                        5. Harsha D N, Aravind Rao Yadwad, Raghu, MD Nadeem M “Planning and design for commercialization of biogas bottling plant for Production of green and low-cost fuel with utilization of biomass resources” International Journal of Scientific & Engineering Research, Volume 6, Issue 1, January-2015 1297 ISSN 2229-5518 Available @ IJSER © 2015 http://www.ijser.org
                                        6. Harsha D. N, Aravind Rao Yadwad, Bheemsh Arya, Ravikumar S. “ Study of sustainable utility of biomass energy technologies for rural infrastructure and village power—opportunities by developing bio village model” International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163 | pISSN: 2321-7308 Volume 3, Issue-11, Nov.2014. Available @ http://www.ijret.org
                                        7. B.N.Nagendra Kumar, Dr.Arvind Rao M Yadwad, Shailesh P. S, Ramesh Babu.K, “Mechanism of laser assisted bending Fixture- an over view” International Journal of Mechanical Engineering and Robotics Research. ISSN 2278 – 0149, Vol. 3, No. 3, July, 2014.
                                        8. S.V.Doddaiah1 , Aravindrao.M.Yadwad2 S.B.Mallur3 , “Migrating From A Legacy Enterprise Resource Planning (ERP) System To A New ERP System: A Case Study” International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163 | pISSN: 2321-7308  Volume: 03 Special Issue: 03 | May-2014 | NCRIET-2014, Available @ http://www.ijret.org
                                        9. B.N.Nagendra Kumar, Dr.Arvind Rao M Yadwad ,Shailesh P. S, Ramesh Babu.K, “Conceptual design of laser assisted fixture for bending operation” International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163 | pISSN: 2321-7308Volume 3, Issue 5,May 2014.
                                        10. Vinay V. Kuppast, S. N. Kurbet, A. M. Yadawad, G. K. Patil, ‘The Study on Effect of Torque on Piston Lateral Motion’, International Journal of Research in Engineering and Technology (IJRET), eISSN: 2319-1163 | pISSN: 2321-7308 Volume: 02 Issue: 08 | Aug-2013
                                        11. Vinay V. Kuppast, S. N.Kurbet, Aravind Yadawad , Basavaraj Kambale, ‘Study on Influence of Temperature on I C Engine Vibration-A Finite Element Approach’, International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622, www.ijera.com, Vol. 1, Issue 4, pp.1893-1897
                                        12. A. M. Yadawad, Dr. S. N. Kurbet, V. V. Kuppast, B.B. Talikot, G. K. Patil, 'Assessment of Biomass Potential of a Rural Village for Power Generation', International Journal of Engineering & Technology (IJERT), ISSN: 2278-0181, Vol. 1 Issue 6, August - 2012.
                                        13. A. M. Yadwad, Dr. S. N. Kurbet, V. V. Kuppast, G. K. Patil, B. S. Talikoti, ' Biomass – An Alternate for Fossil Fuels?', International Journal of Engineering & Technology (IJERT), ISSN: 2278-0181, Vol. 1 Issue 6, August - 2012.
                                        14. A.M.Yadwad, Dr.S.N.Kurbet, V.V.Kuppast, B. Talikot, Yogesh K.K, 'Experimental Study on Suppression of Agglomeration of Particles in Fluidized Bed Combustion of Biomass', International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622, Vol. 1, Issue 4, pp.2051-2054
                                        15. Aravind M.Yadwad, Dr.S.N.Kurbet, Vinay V.Kuppast, B.S.Talikoti and G.K.Patil, 'Investigation of the feasibility of densification of biomass resources and their characterization', Global Journal of Mechanical Engineering and Computational Science (GJMECS), ISSN: 2249 – 3468, Vol. No.: 1, Issue No.: 4, 2011: Pp. 44-49.
                                          Conference Proceedings
                                        1. Pragnya Pradeep, Dr. Aravindrao M. Yadwad2 et.al(2018): “Mechanical Properties of Copper fly-ash Cenosphere   Composites produced by PM technique”  3rd International Conference on Advanced Production and Industrial Engineering   organized by CAPIER, Delhi Technological university, New Delhi, at  Hotel Caspia, New Delhi, during 5-6th  OCT-2018. 
                                        2. Mr.Ashwin Joshi, Dr.Aravindrao Yadwad “Experimental Investigation of External Burnishing Process Parameters   Surface on Cylindrical Work Piece Using Taguchi Approach”, 2nd ICETSET-2018 (International Conference on Emerging Trends in Science, Engineering and Technology), International Journal of Management Technology and Engineering, Vol.8, issue .ix, Sept 2018, pp.1868-1875.  #UGC approved journal no.47955 DOI: 16.10089.IJMTE.2018.V8I9.16.2219
                                        3. Mr. Mahesh G. Emmi1, Dr. Aravindrao M. Yadwad2 et.al (2017): “Cooling rate dependent structural studies of metastable binary ND80FE20 material” International Symposium on Advanced Materials for Engineering Applications (ISAMEA-2017) organized by TEQIP, NIE Mysuru during 24-25th March 2017.
                                        4. Mr. Mahesh G. Emmi1, Dr. Aravindrao M. Yadwad2 et.al (2017): “Phase Transformations and its influence on Magnetic Properties and Microstructure of Binary Nd80Fe20 by Ga Doping” International conference on “Advances in Mechanical Engineering Sciences [ICAMES-17] organized by IFERP and PESCE, Mandya during 21-22 April.2017.
                                        5. Basavaraj Talikoti1, Dr. Aravindrao M. Yadwad2 et.al (2016): “Harmonic Analysis of a two cylinder crankshaft using ANSYS” IEEE- International Conference on Inventive Computation Technologies (ICICT 2016) organized by IEEE-Coimbatore, Tamilnadu, India during  August 26 -27, 2016
                                        6. S.V.Doddaiah1, Aravindrao.M.Yadwad2 et.al (2014): “Customer Relationship Management [CRM] System; an Extended ERP [E2RP] System: A Case Study”  2nd International Conference on Current trends in Engineering and Management   [ICCTEM-2014], organized by VVCE, Mysore during 17-19, July 2014.
                                        7. S.V.Doddaiah1 , Aravindrao.M.Yadwad2 et.al (2014): “Changing from a Legacy Enterprise Resource Planning [ERP] System to a new ERP System: A Case Study” International Conference on Advance Engineering & Technology [ICAET 2014], Bangalore during 23rd March, 2014.
                                        8. Aravindrao.M.Yadwad et.al (2013): “Compacting of Biomass/Agro-waste for Energy Production” International conference on Advances in Mechanical and Computer Engineering(ICAMCE- 2013), Haryana during 18-19 Jan.2013.
                                        9. Aravindrao.M.Yadwad et.al (2012): “Power Generation by Fluidized Bed Combustion Systems Using Various Bio-mass as Fuel” International Conference on Advancements in Engineering & Management (RITS- ICAEM-2012) Hyderabad during 28-29 Feb. 2012.
                                                      National Conference
                                        1. S.V.Doddaiah1 , Aravindrao.M.Yadwad2 et.al (2018): “Investigation and analysis of with and without ERP systems in Manufacturing and Automobile Organizations” National Conference on Skill development and Entrepreneurship organized by VTU and SGBIT, Belgavi during 27-28th April -2018.
                                        2. Giriraj K T1, Aravindrao.M.Yadwad2 (2017): “Design and Analysis of Circumferential Joint in Aircraft Structure” National Conference on Current developments and its applications in Mech. Engineering [NCCDAME-2017] organized by VTU and ISTE, at  KSIT, Bangalore during 10th -12th May  2017.
                                        3. Suraj J K1, Aravindrao.M.Yadwad2 (2017): “A review on design, analysis and life evaluation of composite leaf spring in truck.” National Conference on Current developments and its applications in Mech. Engineering [NCCDAME-2017] organized by VTU and ISTE, at  KSIT, Bangalore during 10th -12th May  2017.
                                        4. S.V.Doddaiah1 , Aravindrao.M.Yadwad2 et.al (2015): “The general concept about Enterprise Resource Planning (ERP) and EERP (ERP II)” National Conference [PRATIBIMB-2015] organized by TEQIP, NIE Mysuru on 10th April 2015.
                                        5. Aravindrao.M.Yadwad2 et.al (2011): “Co-Combustion of Coal & Biomass in CFB pilot plant’’. National Conference on Advances in Mechanical Engineering. [NCAME-2011], organized by SBCEC –Tamilnadu during March 23–24, 2011
                                        6. Aravindrao.M.Yadwad2 et.al (2011): “Technology for biomass handling and Combustion”, National conference on Energy Systems and energy Issues. [ESEI-2011], organized by Dept of Electrical & Mechanical Cluster Engg.  BMSCE, Bangalore during Feb. 18-19, 2011.
                                        7. Aravindrao.M.Yadwad2 et.al (2011): “Effect of feed pre-heating on briquetting of biomass”, National conference on Energy Systems and energy Issues. [ESEI-2011], organized by Dept of Electrical & Mechanical Cluster Engg.  BMSCE, Bangalore during Feb. 18-19, 2011.
                                        8. Aravindrao.M.Yadwad2 et.al (2008): “Effect of feed pre-heating on briquetting of biomass”, National conference on Energy Systems and energy Issues. [ETIME-2008], organized by Dept of Dept. of Mech. Engg.  BMSCE, Bangalore during Aug. 28-29, 2008.
                                        Text Book Engineering Metrology and Measurements, Oxford University Press, 2013, ISBN: 9780198085492   Journal Publications  
                                        1. KK Chandriah, NV Raghavendra (2020), “Multi-Objective Optimization for Preemptive and Predictive Supply Chain Operation”, International Journal of Electrical & Computer Engineering, (2088-8708) 10
                                        2. S Chandra, Nagaraju, NV Raghavendra, GL Shekar, PMA Khan (2019), “Acquisition of Technological Capability by Firms in the Aerospace Cluster of Bengaluru”, The Asian Journal of Technology Management ,12 (1), 58-69
                                        3. KK Chandriah, NV Raghavendra (2018), “Scaling Research Efficacy in Supply Chain Management Towards Industry 4.0 Automation”, Communications, 7, 32-40
                                        4. B Suresha, SL Guggare, NV Raghavendra (2016), “Effect of TiO2 Filler Loading on Physico-Mechanical Properties and Abrasion of Jute Fabric Reinforced Epoxy Composites”, Materials Sciences and Applications, 7 (9), 510-526
                                        5. S Chandra, GL Shekar, NV Raghavendra (2015), “Aerospace Cluster Of Bangalore: Can The SMEs Take Up The Challenges?”,  Journal of Asian Business Strategy, 5 (9), 191-199
                                        6. Lakshmikantha K.S, M. V. Achutha, N.V. Raghavendra, Madhushekar (2015), “Human Activity Recognition through Accelerometer Sensor Using Data Mining”, International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 3 Issue VIII, August 2015
                                        7. SS Prabhakara, NV Raghavendra (2013), “Industrial Cluster and Technological Dynamism: Study of Bangalore Machine Tool Cluster”,  International Journal of Business and Systems Research,  7 (2), 158-167
                                        8. SS Prabhakara, NV Raghavendra (2012), “Does Clustering of Enterprises Foster Technological Learning?: Insights from the Bangalore Machine Tool Cluster in South India”,  International Journal of Technological Learning, Innovation and Development, 5(4)
                                        9. PK Kumar, NV Raghavendra, BK Sridhara (2012), “Effect of Infrared Cured Parameters on the Mechanical Properties of Polymer Composite Laminates”, Journal of composite materials, 46 (5), 549-556
                                        10. PK Kumar, NV Raghavendra, BK Sridhara (2011), “Development of Infrared Radiation Curing System for Fiber Reinforced Polymer Composites: An Experimental Investigation”,  India Indian Journal of Engineering and Materials Sciences, 18(1):24-30
                                        11. PK Kumar, NV Raghavendra, BK Sridhara (2011), “Optimization of Infrared Radiation Cure Process Parameters for Glass Fiber Reinforced Polymer Composites”, Materials & Design 32 (3), 1129-1137
                                        12. NV Raghavendra, MH Bala Subrahmanya (2006), “Development of a Measure for Technological Capability in Small Firms”,  International Journal of Innovation and Learning, 3 (1), 31-44
                                        13. NV Raghavendra, MHB Subrahmanya (2005), “Collective Efficiency and Technological Capability in Small Firms: Evidence From Two Foundry Clusters in South India”, International Journal of Management and Enterprise Development, 2 (3-4), 325-348
                                        14. NV Raghavendra, MH Bala Subrahmanya (2005), “Industrial Clusters and Technological Capability in Small Firms: An Empirical Study of Two Foundry Clusters in South India”,  International Journal of Entrepreneurship and Small Business, 2 (4), 358-376
                                        Conference Proceedings
                                        1. Sharath Chandra. N, G. L. Shekar, N. V. Raghavendra (2017), “Offset Policy and Its Impact on Aerospace Industry in India”, TIE 2017: EAI International Conference on Technology, Innovation, Entrepreneurship and Education, Canterbury, England. September 11-12, 2017
                                        2. Sharath Chandra. N, G. L. Shekar, N. V. Raghavendra (2016), “Aerospace Industry of India: Analysis of Strengths, Weaknesses, Opportunities and Threats”, 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE), IEEE, London, July 18-20. London, UK.
                                        3. Sharath Chandra. N, G. L. Shekar, N. V. Raghavendra (2014), “Aerospace Cluster of Bangalore: Current Scenario and Future Prospects”, 2nd International Conference on Current Trends in Engineering and Management, VVCE, Mysuru, 17 – 19, July 2014. ICCTEM-2014
                                        4. N.V.Raghavendra, S.S.Prabhakara (2013), “Do Industrial Clusters Foster Technological Capability: A Comparative Study of Small and Large Scale Firms in Bangalore Machine Tool Cluster”, Presented at the International Conference on Systems Engineering and Engineering Management 2013, San Francisco, USA, 23-25 October, 2013
                                        5. S.S.Prabhakara, N.V.Raghavendra (2011), “Industrial Clusters and  Technological learning in SMEs : Study of Bangalore Machine Tool Cluster”, Presented at the International  Conference on Innovation and Entrepreneurship (IE 2011)" at Singapore, 25-26 July, 2011.
                                        6. S.S.Prabhakara, N.V.Raghavendra (2011), “ Acquisition of Technological Capability in SMEs: A Case Study of Bangalore Machine Tool Cluster”, Presented at the International conference on Operational Excellence for Global Competitiveness, Febrauary 3rd – 5th 2011, RVCE, Bangalore. The paper won the ‘Best Paper award’.
                                        7. Kirankumar.P, N.V.Ragahavendra  and B.K.Sridhara (2011),“Development of Process Parameters for Infrared Cured Fiber Reinforced Polymer Composites” Presented at National Conference on Developments in Composite Materials and Processes ( DCMP -2011) April 7th - 9th  2011 pp 218- 231, held at Don Bosco Institute of Technology, Mysore Road, Bangalore.
                                        8. Kirankumar.P,  N.V.Ragahavendra  and B.K.Sridhara (2011), “The Effect of Combined Infrared Radiation and Thermal Curing Conditions on the Properties of Glass Fiber Reinforced Polymer Matrix Composites”, Presented at the International Conference on Composites for 21st Century: Current & Future Trends. Jointly organized by Indian Institute of Science and North Carolina A & T State University, USA, Jan 2011, pp 598-603.
                                        9. S.S.Prabhakara, N.V.Raghavendra (2010), “Industrial Cluster and Technological Dynamism: Study of Bangalore Machine Tool Cluster”, International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences [AMMMT – 2010], SIT, Tumkur, November, 2010.
                                        10. P. Kiran Kumar, N.V. Raghavendra, B.K. Sridhara (2009), “Comparative Analysis of Infrared and Thermal cured Glass Fiber Reinforced Polymer Composite Laminates”, International conference on Advanced Composites in Construction, (ACIC 2009), University of Edinburgh, Scotland, U.K., 1-3 September, 2009.
                                        11. Kirankumar.P,  N.V.Raghavendra  and B.K.Sridhara (2007), “Studies on Infrared cured  Glass fiber Reinforced  Polymer Composite  Laminates.”, Presented at the International symposium on Advanced Materials and processing (ISAMP 2007), Bagalkot Engineering College , Bagalkot, Nov 2007.
                                        12. N.V.Raghavendra (2005), “Technological Capability and Collective Efficiency in Small Industry Clusters’, International Conference on Small and Medium Sized Enterprises, organized by ATINER, Lefkada, Greece, September, 2005.
                                        13. N.V.Raghavendra (2002), “ Are Industrial Clusters Conducive for Acquiring Technological Capability?: Evidence from two Foundry Clusters in South India”, International Conference on Small Business and Entrepreneurship Development, organized by European research Press Ltd., Nottingham U.K., April 2002.
                                        14. N.V.Raghavendra (2001), “Technological Capability: A new Mantra for promotion of small Firms”, National Consortium of Management  Research Students, The Indian Institute of Science, Bangalore, September, 2001.
                                        15. N.V.Raghavendra (2001),“Impact of Collective Efficiency on Technological Capability: Evidence from two Foundry Clusters in South India”, International Conference on Economy,  Environment and Society, Organized jointly by Texas A & M Univ., USA and UAS, Bangalore, July, 2001.
                                        Book Chapters
                                        1. KK Chandriah, NV Raghavendra (2018), “Architectural Framework for Industry 4.0 Compliance Supply Chain System for Automotive Industry”, Advances in Intelligent Systems and Computing, Springer, Vol. 986.
                                        2. Sharath Chandra. N, G. L. Shekar, N. V. Raghavendra (2017), “Offset Policy and Its Impact on Aerospace Industry in India”, Lecture Notes in Electrical Engineering, Springer, Vol. 532.
                                        Journal Publications:
                                          1. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Areca Short Fiber Reinforced Polylactic Acid (PLA) Composites: Influence of Physical Treatment on Properties”, Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Vol 8, Issue 4, pp 3063-3072, Nov 2019
                                          2. Naveen A, L Krishnamurthy and T N Shridhar, “Investigation and Simulation of Mechanical Properties of W &Al2O3 Thin Films Co-Sputtered on SS304 Substrates”, International Journal of Recent Technology and Engineering (IJRTE)  ISSN: 2277-3878,Volume-8 Issue-1S2, May 2019, pp 150-153.
                                          3. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Fabrication and Performance of Areca Short Fiber Polypropylene Composite at Varying Fiber Loading”, International Journal of Recent Technology and Engineering (IJRTE)  ISSN: 2277-3878,Volume-8 Issue-1S2, May 2019, pp 183-186.
                                          4. Naveen, A., L. Krishnamurthy, & Shridhar, T.N, “Analysis of W-Al2O3 Nanostructured Thin Film Coatings Using DOE Approach”, Journal of Advanced Research in Manufacturing Material Science and Metullurgical Engineering, 2018, Vol 8, issue 1 &2, pp 1-6.
                                          5. Naveen, A., L. Krishnamurthy, & Shridhar, T.N.  “Analysis of Effect of Deposition Parameters on Thickness of Co-sputtered Titanium/Alumina Thin Film Using ANOVA”, Journal of Advanced Research in NanoScience and NanoTechnology, 2018-11-1, Vol 3, issue 1, 1-5.
                                          6. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Flexural and Impact Characterization of UV Treated Areca Fiber Polypropylene Composites”, International Journal of Mechanical and Production Engineering, Volume- 6, Issue-4, Apr.-2018, http://iraj.in,  pp 68-72.  ISSN(p): 2320-2092, ISSN(e): 2321-2071
                                          7. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Flexural and Impact Characterization of UV Treated Areca Fiber Polypropylene Composites”, International Academy of Science Technology, Engineering and Management IASTEM, 4th -5th , February, 2018 held in Putrajaya, Malaysia. 
                                          8. S A Mohan Krishna, Dr. T N Shridhar, L.Krishnamurthy, “Thermal Analysis of Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites”, International Journal of Digital Publication Technology, Vol, 01, Issue 01, January 2017, 1-8, www.IJDPT.org
                                          9. S A Mohan Krishna, Dr. T N Shridhar, L.Krishnamurthy, “Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites for Thermal Characterization”, International Journal of Digital Publication Technology, Vol, 01, Issue 01, January 2017,1-14,  www.IJDPT.org
                                          10. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Characterization and Analysis of Thermomechanical and Thermoelastic Properties for Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites”, International Journal of Engineering Sciences and Management Research, ISSN 2349 – 6193, 3 (3) March 2016, pp. 44-60.
                                          11. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Significance and Need of Computational Analysis and Finite Element Modeling for the Investigation of Thermal Behaviour of Composite Materials”,  International Journal of Computational Engineering Research, ISSN 2250 – 3005, February 2016, Vol. 6 issue 2pp. 1-5
                                          12. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Experimental and Computational Approaches to Investigate the Effect of Graphite on Thermal and Mechanical Behaviour in Aluminium-Silicon Carbide-Graphite Composites”, International Journal of Scientific Engineering and Applied Science, ISSN 2395 - 3470, vol. 2, issue 1. January 2016, pp. 4-34. 
                                          13. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Investigation of Heat Flow, Thermal Shock Resistance and Electrical Conductivity of Al 6061-Silicon Carbide-Graphite Hybrid Metal Matrix Composites”, International Journal of Research in Engineering and Science, ISSN 2320 - 9364, Vol 4, Issue 6 June 2016, pp. 48-55.
                                          14. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “An Experimental Investigation and Validation of Thermo-elastic Models on thermal Conductivity Behaviour of Al 6061-Silicon Carbide-Graphite Hybrid Metal Matrix Composites”, International Journal of Scientific Research Engineering and Technology, ISSN 2278 - 0882, Vol. 5, Issue 6, June 2016, pp. 353-367.
                                          15. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Computational Modeling and Relevance of Numerical Convergence for the Investigation of Thermal Expansion Behaviour for Aluminium Matrix Composites”, International Journal of Computational Materials Science and Engineering, ISSN 2047 - 6841, Vol. 4, No. 4, May 2016, pp. 1-27.
                                          16. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Computational Modeling and Mesh Independence Studies for the Investigation of Thermal Conductivity Behaviour for Aluminium Hybrid Composites”, Journal of Mechanical Engineering and Biomechanics, Vol. 1, Issue 1, August 2016, pp. 14-21.
                                          17. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Utility of Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites to Investigate Thermal Properties for Engineering Applications”, International Journal for Research in Emerging Science and Technology, ISSN: 2349 – 761, Vol. 3, Issue 7, July 2016, pp. 21-28.
                                          18. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Microstructural characterization and Investigation of Thermal Conductivity Behaviour of Al 6061 – SiC – Gr Hybrid Metal Matrix Composites”, International Journal of Engineering and Materials Sciences, Vol. 23, Issue 4, August 2016, pp 207-222
                                          19. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Effectiveness of Areca (Betel) Fiber as a Reinforcing Material in Eco-friendly Composites - A Review”, Indian Journal of Advances in Chemical Science S1 (2016) 27-33, Available online at www.ijacskros.com.
                                          20. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Significance of Physical Surface Treatment on Areca Fiber – An Ecological and Economical Process”, International Journal of Modern Engineering Research (IJMER), IJMER, ISSN: 2249–6645, www.ijmer.com, Vol. 6, Iss. 8, August 2016, 79-87
                                          21. Naveen A, L Krishnamurthy, T N Shridhar, “A Review on Thermal Barrier Coatings and its Deposition Techniques”, International Journal of Engineering Sciences & Management Research”, http: // www.ijesmr.com © International Journal of Engineering Sciences & Management Research 3(3): April, 2016, 1-9.
                                          22. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Experimental Investigations on Thermal Analysis and Thermal Characterization of Al 6061-Sic-Gr Hybrid Metal Mattrix Composites”, International Journal of Material Science, Vol. 5, No. 2—September 2015 2226-4523/15/02 054-13 © 2015 DEStech Publications, Inc. doi:10.12783/ijmsci.2015.05022.04, pp 54-66
                                          23. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Computational investigation on thermal expansivity behavior of Al 6061–SiC–Gr hybrid metal matrix composites”, International Journal of Computational Materials, Science and Engineering, Vol. 4, No. 3 (2015), 1550016, pp 1-21, © Imperial College Press, DOI: 10.1142/S2047684115500165.
                                          24. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “An Experimental Investigation on Specific Heat Capacity and Enthalpy of Al 6061-SiC-Gr Hybrid Metal Matrix Composites using Differential Scanning Calorimetry”, Advanced Materials Research Vol 1105, May  2015 pp 208-214, © (2015) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR. 1105.208
                                          25. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “An Investigative Review on Thermal Characterization of Hybrid Metal Matrix Composites”, International Journal of Modern Engineering Research (IJMER), Vol. 4, Issue. 8 Aug, 2014,pp 53-62, Version 1 ,ISSN: 2249–6645, OPEN ACCESS
                                          26. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Thermal Expansivity Behavior and Determination of Density of Al 6061-Sic-Gr Hybrid Metal Matrix Composites”, International Journal of Modern Engineering Research (IJMER), Vol. 4, Iss. 8 Aug, 2014,Version 4 pp 8-13 ,ISSN: 2249–6645, OPEN ACCESS
                                          27. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “A Comprehensive Experimental Investigation on Thermal Properties and Characterization of Hybrid Metal Matrix Composites”, International Journal of Recent Scientific Research, Vol. 5, Issue, 9, pp.1589-1594, September, 2014, ISSN: 0976-3031.
                                          28. T. N.Shridhar, L. Krishnamurthy, and B.K. Sridhara, “Machinability Studies on Aluminium-Matrix Hybrid Composites”, Advanced Materials Research Vol. 894 (2014) pp 27-31© (2014) Trans Tech Publications,  Switzerland,doi:10.4028/www.scientific.net/AMR.894.27
                                          29. Deepak, C, M. H. BalaSubrahmanya, T, N, Shridhar, Joshi, K. A. and Priyadarshi, T. (2019): “Effect of Innovation on Firm Performance – The Case of a Technology Intensive Manufacturing Cluster in India”, International Journal of Innovation and Technology Management, 16(7), 1-31.
                                        Conference Proceedings:
                                        1. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar “Influence of physical modification on Indian originated areca fiber based polypropylene composites: Mechanical and dielectric properties characterization”, AIP Conference Proceedings 2057, 020052 (2019); Published by AIP Publishing, https://doi.org/10.1063/1.5085623 Published Online: 11 January 2019.
                                        2. Naveen A, L Krishnamurthy and T N Shridhar, “Investigation and Simulation of Mechanical  Properties of W &Al2O3 Thin Films Co-Sputtered on SS304 Substrates”, International Conference on Advances in Mechanical Engineering and Management (ICAMEM- 2019), March 22-23, 2019, Vidyavardhaka College of Engineering, Mysuru.
                                        3. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Fabrication and Performance of Areca Short Fiber Polypropylene Composite at Varying Fiber Loading”, International Conference on Advances in Mechanical Engineering and Management (ICAMEM- 2019), March 22-2,3 2019, Vidyavardhaka College of Engineering, Mysuru
                                        4. Naveen, A., Krishnamurthy, L., & Shridhar, T. N. (2018, April). “Thickness and surface roughness study of co-sputtered nanostructured alumina/tungsten (Al2O3/W) thin films”, In AIP Conference Proceedings (Vol. 1943, No. 1, p. 020083). AIP Publishing.
                                        5. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “An Experimental Investigation on Specific Heat Capacity and Enthalpy of Al 6061-SiC-Gr Hybrid Metal Matrix Composites using Differential Scanning Calorimetry”, The 5th  International conference on Advanced Materials Research, (ICAMR 2015) held at Doha on January 7th -8th , 2015.
                                        6. T, N, Shridhar, L. Krishnamurthy, and B.K. Sridhara, “Machinability Studies on Aluminium-Matrix Hybrid Composites”, The 4th International Conference on Advanced Materials Research (ICAMR 2014) held at Macau, China, on January 22-23, 2014.
                                        7. Deepak, C., and M. H. BalaSubrahmanya, T, N, Shridhar (2017): “Exploring the Influence of Degree of Cluster Linkages on Innovation in Bengaluru High-tech Manufacturing Cluster: An Absorptive Capacity Approach”, Asian Conference on Innovation and Policy 2017 organized by Asian Society for Innovation and Policy at National Economics University, Hanoi, Vietnam during September 21-23, 2017
                                         
                                        • Studies on Thin Film Multilayer Coatings deposited using Sputtering Process
                                        • Deposition and Characterization of Aluminium Thin film Coatings using DC Magnetron Sputtering Process
                                        • Studies on nanostructure aluminium thin film coatings deposited using DC magnetron sputtering process
                                        • Damage Based Fatigue Life Prediction of AISI 1040 Steel
                                        • Mathematical Modeling and Experimental Evaluation of the Tensile Properties of Multiwalled Carbon Nanotubes filled Acrylonitrile Butadiene Styrene Composites
                                        • Dielectric Responses of Hybrid Polymer Matrix Composites at 2-3 GHz Microwave Frequencies
                                        • Machinability Assessment of Aluminium-Graphite-Silicon Carbide Hybrid Composites
                                        • Mechanical behaviour of MWCNT filled polypropylene thermoplastic composites
                                        • Machinability Studies on Aluminium Matrix Hybrid Composites
                                        • Fatigue crack initiation and propagation life prediction of materials
                                        • Effect of infrared cure parameters on the mechanical properties of polymer composite laminates
                                        • Fatigue life prediction: a continuum damage mechanics and fracture mechanics approach
                                        • Friction characteristics of aluminium silicon carbide graphite hybrid composites
                                        • Strain Controlled Fatigue Life Prediction of Materials
                                        • Strain Controlled fatigue Crack initiation life prediction of Materials
                                        • Fatigue life Estimation of Hybrid aluminium matrix composites
                                        • Optimization of infrared radiation cure process parameters for glass fiber reinforced polymer composites
                                        • Development of infrared radiation curing system for fiber reinforced polymer composites: An experimental investigation
                                        • Comparative study on the machinability aspects of aluminium-silicon carbide and aluminium-graphite-silicon carbide hybrid composites
                                        • Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulates
                                        • Effect of silicon carbide particulates on wear resistance of graphitic aluminium matrix composites
                                        • Effect of addition of graphite particulates on the wear behaviour in aluminium–silicon carbide–graphite composites
                                        • Parametric studies on the tribological behaviour of aluminium matrix hybrid composites
                                        • A Series of Tool-Life Studies on Aluminium Matrix Hybrid Composites
                                        • Intellectual property rights: Issues for creation of institutional repository
                                        • A reliability based stress–life evaluation of aluminium–graphite particulate composites
                                        • Comparative study on the machinability aspects of aluminium silicon carbide and aluminium graphite composites
                                        • Studies on tensile and interlaminar shear strength properties of thermally cured and microwave cured glass–epoxy composites
                                        • Studies on mechanical behavior of microwave and thermally cured glass fiber reinforced polymer composites
                                        • Application of conjoint analysis in new product development
                                        • Influence Of Testing Frequency On The Fatigue Behaviour Of Metals And Alloys
                                        • Effect of Loading Frequency on Composites: A Review
                                        • Simulation Studies on Ceramic Coatings on Aluminium thin films for Solar Reflector Application
                                        • Studies on mechanical and thermal properties of infrared and thermally cured glass-epoxy composite
                                        Journal Publications
                                          1. S. Prakash, R. Sasikumar ,ElangoNatarajan,B. Suresha. (2020). “Influence of Feeding Techniques in Bottom Tapping Stir Casting Process for Fabrication of Alumina Nano-filler-reinforced Aluminium Composites” ,The Indian Institute of Metals – IIM (Available Online).
                                          2. Mahadevaswamy, H. S,B. Suresha (2020). “Role of nano-CaCO3 on mechanical and thermal characteristics of pineapple fibre reinforced epoxy composite”, Material Today Proceedings, vol. 22(3) 572-579.
                                          3. S Rakshath, B. Suresha,R.Sasi Kumar, S. Saravanan(2020).  “Dry sliding and abrasive wear behaviour of Al-7075 reinforced with alumina and boron nitride particulates”, Material Today Proceedings, vol. 22(3) 619-626.
                                          4. Krishna, B. Suresha, H.M.Somashekar(2019).   “Role of Fillers on Physico-Mechanical Properties of POM Based Hybrid Composites”, Materials Sciences and Engineering, (895) 170-175.
                                          5. B.S.Kanthraju, B.Suresha  and H M Somashekar(2019).  “Role of Zirconia Filler on Mechanical Properties and Dry Sliding Wear Behavior of Glass/Basalt Hybrid Fabric Reinforced Epoxy Composites”, Materials Sciences and Engineering,(895)200-205.
                                          6. Suresha Bheemappa, AchyutanantaPadaki, Akash Jain, Bharath Kumar, Akshay A. Kulkarni(2019).  “Role of Zirconia Filler on Mechanical Properties of HDPE/UHMWPE Blend Composites”, Materials Sciences and Engineering,(895)272-277.
                                          7. B. Suresha, S.G. Channabasavanna, and N. Siva Shanmugam, (2019). “Microstructure and Abrasive Wear Behaviour of Nickel Based Hardfacing Stainless Steel Deposited by Gas Metal Arc Welding”,Applied Mechanics and Materials,(895)278-283.
                                          8. Hemanth R ,Suresha B, Sekar M, (2019).  “Dry Sliding Wear Performance of Thermoplastic Copolyester  Elastomer Composites” Applied Mechanics and Materials, (895)38-44
                                          9. B. Harshavardhan1, R. Ravishankar, B. Suresha,  S. Srinivas, (2019).  “Static and Dynamic Mechanical Performance of Carbon Fiber Reinforced Polyethersulfone Composites” Applied Mechanics and Materials (895) 265-271.
                                          10. M. Darshan, B. Suresha, (2019).  “Mechanical and Abrasive Wear Behaviour of Waste Silk Fiber Reinforced Epoxy Bio composites Using Taguchi Method”, Materials Science Forum, (895)787-793.
                                          11. R. Hemanth, B. Suresha, M. Sekar(2019).  “Role of fibers and fillers on thermal behaviour of thermoplastic copolyester elastomer composites”, AIP Conference Proceedings 2128, 020018 (2019).
                                          12. B. SureshaG. HemanthApurvaRakeshK. M. Adarsh (2019). “Tribological behaviour of pongamia oil as lubricant with and without halloysite nanotubes using four-ball tester”, AIP Conference Proceedings, 2128, 030011.
                                          13. G. HemanthB. Suresha,R. Hemanth(2019).  “The effect of hexagonal boron nitride on wear resistance under two and three-body abrasion modes of polyetherketone composites”, AIP Conference Proceedings, 2128, 030011.
                                          14. Suresha, B., G. Hemanth, Apurva Rakesh, and K. M. Adarsh.(2019): "Tribological behaviour of pongamia oil as lubricant with and without halloysite nanotubes using four-ball tester." In AIP Conference Proceedings, vol. 2128, no. 1, p. 030011.
                                          15. B. Suresha,Roshan S Shenoy, Raviprasad Bhat, P K Sohan, R Hemanth(2019).  “Optimization of wear behaviour of boron nitride filled polyaryletherketone composites by Taguchi approach”, Materials Research express, p.085329.
                                          16. B. Muralidhara, S.P. Kumaresh BabuaB. Suresha (2019).  “Utilizing vacuum bagging process to prepare carbon fiber/epoxy composites with improved mechanical properties”, Materials Today Proceedings, (Available Online).
                                          17. B.MuralidharaS,P. KumareshBabuaB. Suresha (2019).  “The effect of boron carbide on the mechanical properties of bidirectional carbon fiber/epoxy composites”, Materials Today Proceedings, (Available Online).
                                          18. B. Suresha,B.Harshavardhan, Ashwij M.Rao, U.R.Koushik, R.Hemanth (2019).  “Role of nano-fillers on tribological behaviour of ultra high molecular weight polyethylene composites”, Materials Today Proceedings, (Available Online).
                                          19. B. SureshaC. A. Varun, N. M. Indushekhara,  H. R. Vishwanath. (2019) “Effect of Nano Filler Reinforcement on Mechanical Properties of Epoxy Composites”, IOP Conf. Ser.: Mater. Sci. Eng.574 012010.
                                          20. Manoharan, S., R. Vijay, D. Lenin Singaravelu, S. Krishnaraj,  B. Suresha(2019).  “Tribological characterization of recycled basalt-aramid fiber reinforced hybrid friction composites using grey-based Taguchi approach”,Materials Research Expressvol. 6 (6) 065301.
                                          21. Anjum, Naveed, B. SureshaSomanahally Lingaiah Ajit Prasad. (2019). “Influence of Water Ageing on Mechanical Properties of CaCO3 Filler Filled Epoxy Resin and Sansevieria/Carbon Fiber Reinforced Composites”, Open Journal of Composite Materials, 2019, 9, 1-20.
                                          22. P.A. Udaya Kumar  Ramalingaiah B. Suresha  N. Rajini  K.G. Satyanarayana. (2018). “Effect of treated coir fiber/coconut shell powder and aramid fiber on mechanical properties of vinylester Polymer Composite”,Polymer Composites, 39(12) 4542-4550.
                                          23. G. S. Divya,B. Suresha(2018). “Role of Metallic Nanofillers on Mechanical and Tribological Behaviour of Carbon Fabric Reinforced Epoxy Composites”, Materials Sciences and Applications,9 740-750.
                                          24. B.SureshaKarthikAdappaNithin KundachiraSubramani(2018).  “Mechanical and tribological behaviours of epoxy hybrid composites reinforced by carbon fibers and silicon carbide whiskers Materials”, Materials Today: Proceedings, 5(8), pp.16658-16668.
                                          25. Nithin Kundachira SubramaniaSachhidanandaShivannaShilpaKasargod NagarajB.SureshabB.M.Jagajeevan Raj,HatnaSiddaramaiah(2018). “Optoelectronic Behaviours of UV shielding Calcium Zirconate Reinforced Polycarbonate Nano composite Films”,Materials Today Proceedings, 5 16626–16632
                                          26. BheemappaSuresha ManpinderSinghSaini (2018). “Fabrication and mechanical characterization of carbon fabric reinforced epoxy with alumina and molybdenum disulfide fillers”, International Journal Computer Aided Engineering and Technology, 10 89- 101.
                                          27. B. Suresha, B. Harshavardhan, and R. Ravishankar,(2018). “Tribo-performance of epoxy hybrid composites reinforced with carbon fibers and potassium titanate whiskers”, AIP Conference Proceedings, 1943, 020069 1- 9.
                                          28. Vinod, Ajith Kumar, B Suresha, M V Kiran Kumar,S Ramesh (2018). “Study on Two Body Abrasive Wear behaviour of Carboxyl-Graphene Reinforced Epoxy Nano- composites”,IOP Conference Series: Materials Science and Engineering, 376 1-8.
                                          29. J.Pavitraa. B.BharathabB.SureshaaB.Sasikumaran Nairc(2018). “Effect of short glass fiber and ferrosilicon content on mechanical properties of phenolic based friction composite material”, Materials Today Proceedings, 5 7915–7923.
                                          30. R.Hemanth B. Suresha(2017). “Effect of Short Glass Fibre and Fillers on Friction and Wear Performance of Multi- Phased Thermoplastic Copolyester Elastomer Composites”,International Journal of Nanotechnology, 14(9) 893-906.
                                          31. B. Suresha R.M. Devarajaiah Manpinder Singh  , R. Hemanth (2017). “ Optimisation of Testing Parameters on Two-Body Abrasive Wear Behaviour ofNano-OMMT Filled Carbon-Epoxy Composites Based on the Taguchi Method”,International Journal of Nanotechnology, 14(9) 915-929.
                                          32. Bharath Basavaraj Pattanashetty, Suresha Bheemappa, Hemanth Rajashekaraiah(2017). “Effect of Filler-Filler Interactions on Mechanical Properties of Phenol Formaldehyde Based Hybrid   Composites”,International Journal of Engineering and Technologies,13 24-38.
                                          33. Basappa HulugappaMysuru V. AchuthaBheemappa Suresha(2016).  “Effect of Fillers on Mechanical Properties and Fracture Toughness of Glass Fabric Reinforced Epoxy Composites”,Journal of Minerals and Materials Characterization,.4, 1-14
                                          34. Rajashekaraiah, Hemanth, Suresha Bheemappa, Seung-Han Yang, and Sekar Mohan. (2016). “Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites”, International Journal of Precision Engineering and Manufacturing,17, 6: 755-763.
                                          35. Prabu, K., B. Nalini, B. Suresh, and M. Sekar .  (2016). “Analysis of Tribological Properties of Lubricating Gear Oil with Nano Silica Particles”Journal of Achievements in Materials and Manufacturing Engineering, 79, 2 59-65.
                                          36. Manoharan, S., G. Ramadoss, B. Suresha, and R. Vijay (2015). “Effect of Fibre Reinforcement on Tribological Performances of Hybrid Friction Composites”, Journal of the Balkan Tribological Association, 21, 3 525-538.
                                          37. B.S. Kanthraju, B. Suresha,Manpinder S. Saini (2015). “Effect of Type and Filler Loading on the Static Mechanical Properties of Glass-Basalt Hybrid Fabric Reinforced Epoxy Composites”, International Journal of Advances in Production And Mechanical Engineering,5, 2394-6210.
                                          38. Suresha Bheemappa (2015). “Physico-Mechanical Behaviour of Thermoplastic Co-Polyester Elastomer /Polytetrafluoroethylene Composite with Short Fibers and Micro fillers”,Journal of Composite Materials, 49(18) 2217-2229.
                                          39. Suresha BheemappaP ArivalaganN PalaniappanG Chandramohan(2015).  “Dynamic Mechanical Analysis and Dry Sliding Wear Behaviour of Carbon Fabric Reinforced Epoxy Composite with Fly Ash Cenosphere”,International Journal of Applied Engineering Research,10(61) 239-251.
                                          40. M. SekarSuresha BheemappaRajashekaraiah Hemanth(2015).  “Abrasive Wear Behavior of Thermoplastic Copolyester Elastomer Composites”,International Journal of Emerging Materials Research,4(1), 1-11.
                                          41. S. ManoharanG. RamadossB. SureshaR. Vijay(2015).  “Influence of Fiber Reinforcement and Abrasive Particle Size on Three-Body Abrasive Wear of Hybrid Friction Composites”,Applied Mechanics and Materials, 156-161.
                                          42. M Manjunath NM RenukappaB Suresha (2015).  “Influence of Micro and Nanofillers on Mechanical Properties of Pultruded Unidirectional Glass Fiber Reinforced Epoxy Composite Systems”, Journal of Composite Materials,1 -13.
                                          43. N Rajini, J T Winowlin Jappes, B Suresha, S Rajakarunakaran, I Siva, N Azhagesan(2014) “Effect of Organically Modified Montmorillonite Clay on Wear Behaviour of Naturally Woven Coconut Sheath/Polyester Composites”Journal of Engineering Tribology, 228(5) 483-497.
                                          44. S Manoharan, G Ramadoss, B Suresha(2014). “Investigate The Fiber Reinforcement Effect on Viscoelastic Response and Thermal Stability of Hybrid Friction Composite”, Applied Mechanics and Materials, 591, 132-136.
                                          45. Hemanth, R., M. Sekar, and B. Suresha. (2014): "Effects of fibers and fillers on mechanical properties of thermoplastic composites." Indian Journal of Advances in Chemical Science,  2 (2014): 28-35.
                                          46. Sembian Manoharan, B Suresha, Govindarajulu Ramadoss, Basavaraj Bharath, (2014). “Effect of Short Fiber Reinforcement on Mechanical Properties of Hybrid Phenolic Composites.”Journal of Materials, 1-10.
                                          47. S. Manoharan, B. Suresha, PB Bharath, G.Ramadoss (2014).“Investigations on Three-Body Abrasive Wear Behaviour of Composite Brake Pad Material”, Plastic and Polymer Technology, 3, (1,) 10-18.
                                          48. Darshan S.M, B. Suresha, B.N. Ravi Kumar (2014). “Optimization of Dry Sliding Wear Behaviour of Zirconium Filled Bismaleimide Nanocomposites”, International Journal of Mechanical Engineering and Technology, Vol. 5, Issue No. 9, 2014, pp. 62-70.
                                          49. Manjunath Kuruvinashetti, Mohammed Ismail, B Suresha(2014). “Two Body Abrasive Wear Behaviour of Short Glass Fiber and Particulate Filled Polymethylmethacrylate Composites”, International Journal of Mechanical Engineering and Technology ,  5, (9) 86-90.
                                          50. S Puneeth, Mohammed Ismail, B Suresha(2014).  “The Effect of Addition of Nano Fillers on Three Body Abrasive Wear Behaviour of Unidirectional Glass Fiber Reinforced Epoxy Composites",International Journal of Mechanical  Engineering  and  Technology, 5 ( 9) 81-85.
                                          51. R Hemanth, Prakash Sam Thomas, B Suresha, M Sekar(2014).   “Effect of Short Glass Fiber and Fillers on Dry Sliding Wear Behaviour of Thermoplastic Co Polyester Elastomer Composite”,International Journal of Mechanical Engineering  and  Technology,  5,(9) 71-80.
                                          52. G S Divya, Anand Kakhandaki, B Suresha(2014). “Wear Behaviour of Coir Reinforced Treated and Untreated Hybrid Composites”, International Journal of Innovative Research and Development, 3.(5) 632- 639.
                                          53. B N Ramesh, B Suresha(2014). “Application of Grey Based Taguchi Method for Abrasive Wear Assessment of MoS2 Filled Carbon –Epoxy Composites”, Technology Letters, 1(7) 19-23.
                                          54. Naveed Anjum, B Suresha, Ajit Prasad  N Rajini(2014).  “Effect of Fiber Length and Loading of Sansevieria Fiber on Dry Sliding Wear Behaviour of Poly Ester Composites”, Technology Letters, 1(4) 14-18.
                                          55. R Hemanth, B Suresha  M Sekar (2014).“Physico-Mechanical Behaviour of Thermoplastic Copolyester Elastomer/Polytetrafluoroethylene Composites with Short Fibers and Micro Fillers”, Journal of CompositeMaterials, 22, pp. 1-13.
                                          56. Hemanth Rajashekaraiah, SekarMohan, PramodaKumari Pallathadka, Suresha Bhimappa(2014).  “Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites”,Advances in Tribology- Hindawi Publishing Corporation. Vol. 2014
                                          57. B.N Ramesh, B. Suresha(2014). “Optimization of Tribological Parameters in Abrasive Wear Mode of Carbon- Epoxy Hybrid Composites”, Materials and Designvol. 59, 38–49.
                                          58. Bheemappa Suresha, R M Devarajaiah(2013). “Investigation of Organo-Modified Montmorillonite Loading Effect on the Abrasion Resistance of Hybrid Composites”, Materials and Design,47 pp750–758
                                          59. NaveedAnjum,SLAjitPrasad,BheemappaSuresha(2013). “Role of Silicon Dioxide Filler on Mechanical and Dry Sliding Wear Behaviour of Glass-Epoxy Composites”, Advances in Tribology,  2013.
                                          60. Bheemappa Suresha(2013).“Study on Material Removal Rate and Surface Roughness in Machining of TiB2 Reinforced Aluminum 6063 Composites: A Taguchi’s Approach”,International Journal of Advanced Materials Science, 4 (1), pp 43-59.
                                          61. Bhadrappa RevappaRaju, Bheemappa Suresha, Ragera Parameshwarappa Swamy, BannangadiSwamy Gowda Kanthraju(2013) “Investigations on Mechanical and Tribological Behavior of Particulate Filled Glass Fabric Epoxy Composites”,Journal of Minerals and Materials Characterization and Engineering,1, pp 160-167.
                                          62. Bhadrabasol Revappa Raju, Bheemappa Suresha, RagerParameshwarappa Swamy,Bannangadi Swamy Gowda Kanthraju, (2013).“Assessment of Cutting Parameters Influencing on Thrust Force and Torque during Drilling Particulate Filled Glass Epoxy Composites”, Journal of Minerals and Materials Characterization and Engineering, 1 (3), pp.101-109.
                                          63. Hemanth, M Sekar, B. Suresha , Pavitra Ajagol  (2013). “Effect of micro filler additions on the flexure and impact properties of short glass fiber reinforced Arnitel/Polytetrafluoroethylene blend”,International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMT-2013) 3-4
                                          64. B R  Raju, R P Swamy, Bheemappa Suresha, K N Bharath(2012). “The Effect of Silicon-Dioxide Filler on the Wear Resistance of Glass Fabric Reinforced Epoxy Composites”,International Journal of Advances in Polymer Science and Technology, 2 (4), pp.51-57.
                                          65. Bheemappa Suresha (2012).“Dynamic Mechanical Analysis and Three-Body Wear of Carbon–Epoxy Composite Filled with SiC Particles”,Journal of Reinforced Plastics and Composites, 31(21) 1435-1448.
                                          66. Bheemappa Suresha(2012).  “ Mechanical and Abrasive Wear Behavior of Carbon Fabric Reinforced Epoxy Composite With and Without Fly Ash Cenospheres”, Journal of Composite Materials,47,2925-2935.
                                          67. Bheemappa Suresha(2012).Taguchi Approach for Characterization of Three-Body Abrasive Wear of Carbon-Epoxy Composite with and Without SIC FillerComposite”, Composites Interfaces, 19(5) 297-311.
                                          68. Irullappa samy Siva , Jebas Thangiah Winowlin Jappes, Bheemappa Suresha (2012).“Investigation of Mechanical and Tribological Behaviour of Naturally Woven Coconut Sheath Reinforced Polymer Composites”,Polymer Composites, 33(5) 723-732.
                                          69. B R Raju ,Bheemappa Suresha, R P Swamy(2012). “Tribo-Performance of Silicon Dioxide Filled Glass Fabric Reinforced Epoxy Composites”, ARPN Journal of Material Sciences and Applications, 7 (4) 485-491.
                                          70. Bheemappa Suresha(2011). “Effect of Different Abrasion Behaviour of Silicon Dioxide Filled Epoxy Nano Composites”,World Journal of Engineering; Vol-1, 1075-1076.
                                          71. Bheemappa Suresha(2011).“Three Body Abrasion Wear Behaviour of Microfiller-Filled Carbon-Epoxy Composites:A Factorial Design Approach”, Composite Interfaces, vol.18, 783-800.
                                          72. Bheemappa Suresha (2011). “Role of Silicon Dioxide Filler on Dry Sliding Wear Behaviour of Epoxy Nano Composites”, World Journal of Engineering, vol-1 pp. 1077-1079.
                                          73. Bheemappa Suresha(2011).  “Dry Sliding Wear Behavior of Carbon Fabric-Reinforced Epoxy Composite with and Without Silicon Carbide Composites”, Interface, 18, pp. 509-526.
                                          74. M G Veena  N M Renukappa  Bheemappa Suresha K N Shivakumar(2011).  Tribological and Electrical Properties of Silica-Filled Epoxy Nano composites”, Polymer Composites,32 (12) 2038–2050. 
                                          75. N M Rashmi, Renukappa, Bheemappa Suresha, R M Devarajaiah, K N Shivakumar (2011).“Dry Sliding Wear Behavior of Organo-Modified Montmorillonite Filled Epoxy Nano-Composites Using Taguchi’s Techniques”, Material & Design, 32(8-9) 4528-4536.
                                          76. Bheemappa Suresha, B N Ravi Kumar (2011). “Two-Body Abrasive Wears Behavior of Particulate Filled Polyamide66 / Polypropylene Nanocomposites”, Journal of Applied Polymer Science, 111 (2) 685-691.
                                          77. Bheemappa Suresha, B N Ramesh, K M Subbaya, G Chandramohan(2010): “Mechanical and Three-body Abrasive Wear Behavior of Carbon-Epoxy Composite with and without graphite filler”, Journal of Composite Materials, 44 (21) 2509 - 2519. 
                                          78. Bheemappa Suresha(2010).  “Effect of Abrasives on Three-Body Abrasive Wear Behaviour of Particulate Filled Polyamide 66/Polypropylene Nanocomposites”, Composite Interface, 17, 113–126
                                          79. Bheemappa Suresha(2010).“Friction and Dry Slide Wear of Short Glass Fiber Reinforced Thermoplastic Polyurethane Composites”, Journal of Reinforced Plastics and Composites, 29, (7) 1055-1061.
                                          80. Bheemappa Suresha(2010).“Role of Micro/Nano Fillers on Mechanical and Tribological Properties of Polyamide66 / Polypropylene Composites”, Materials and Design, 31 (4)1993-2000
                                          81. Bheemappa Suresha,B N Ramesh, K M Subbaya, B N Ravi Kumar, G Chandramohan, (2010).  “Influence of Graphite Filler on Two-Body Abrasive Wear Behaviour of Carbon Fabric Reinforced Epoxy Composites”, Materials and Design,  31(4). 1833-1841. 
                                          82. Bheemappa Suresha(2010).“Friction and Dry Sliding Wear Behavior of Carbon and Glass Fabric Reinforced Vinyl Ester Composites”, Tribology International, 43 (3) 602-609.
                                          83. B N Ravi Kumar, Bheemappa Suresha,  R R N Sailaja, (2010).  “Experimental Investigation on the Abrasive Wear Behavior of Nanoclay-Filled EVA/LDPE Composites”, Polymer Composites, 31 (3) 426-433.
                                          84. Bheemappa Suresha(2010).“Friction and Dry Sliding Wear Characteristics of Particulate Filled Thermoplastic Nanocomposites”,Journal of Manufacturing Engineering, 5 (2) 80-86.
                                          85. Suresha, B, P. Sampathkumaran, and S. Seetharamu, (2010).  “Effect of abrasive types on the three-body abrasive wear behaviour of glass-vinyl ester and carbon-vinyl ester composites”, The Journal of CPRI, vol. 5(2) 43-50.
                                          86. Bheemappa Suresha (2009).“Two-body Abrasive Wear Behavior of Nano-Clay Filled LDPE/EVA Composites”, Journal of Reinforced Plastics and Composites, Vol. 28, 2999 - 3007.
                                          87. Murtuza Ali Syed, Siddaramaiah, Bheemappa Suresha, Akheel Ahmed Syed(2009).  “Mechanical and Abrasive Wear Behaviour of Coleus Spent Filled Unsaturated Polyester/Polymethyl Methacrylate Semi Interpenetrating Polymer Network Composites”, Journal of Composite Materials,vol. 4. 2387 – 2400.
                                          88. Bheemappa Suresha, Siddaramaiah, Kishore Seetharam, U S Kumaran(2009).  “Investigations on the Influence ofGraphite Filler on Dry Sliding Wear and Abrasive Wear Behaviour of Carbon Fabric Reinforced EpoxyComposites”, Wear, 267 (9-10) 1405-1414.
                                          89. B N Ravi Kumar, M Venkatarama Reddy, Bheemappa Suresha(2009).  “Dry slide wear behavior of LDPE/EVA polyblends with nano-clay filler”,Journal of Reinforced Plastics and Composites, vol 28 (15)1847- 1856.
                                          90. Bheemappa Suresha, G Chandramohan(2009).  “Role of Fillers on Three-Body Abrasive Wear Behavior of Glass Fabric Reinforced Epoxy Composites”, Polymer Composites,  30, (8) 1106–1113.
                                          91. B N Ravi Kumar, Bheemappa Suresha,M Venkataramareddy(2009).Effect of Particulate Fillers on Mechanical and Abrasive Wear Behaviour ofPolyamide 66/Polypropylene Nanocomposites”, Materials & Design, 30,(9) 3852-3858. 
                                          92. Bheemappa Suresha,Kunigal N Shiva Kumar(2009).Investigations on Mechanical and Two-Body Abrasive Wear Behaviour ofGlass/Carbon Fabric Reinforced Vinyl Ester Composites”, Materials & Design,  30, (6) 2056-206.
                                          93. Bheemappa Suresha, G Chandramohan, S Mohanraj, (2009).  “Three-Body Abrasive Wear Behavior of Filled Epoxy Composite Systems”, Journal of Reinforced Plastics and Composites, 28, 225 - 233.
                                          94. Bheemappa Suresha(2009). “Effect of Abrasive Types on the Three-Body Abrasive Wear Behaviour of Glass- Vinyl Ester and Carbon-Vinyl Ester Composites”, The Journal of CPRI, Vol. 5 (2) 43-50.
                                          95. Suresha, B, G. Chandramohan, P. R. Sadananda Rao, P. Sampathkumaran, S. Seetharamu(2008). “Influence of SiC filler on mechanical properties of glass fabric reinforced polyester composites”,Journal of Manufacturing Engineering, 26(6) 101-110.
                                          96. Suresha, B, (2008)  “Three body abrasive wear behaviour of neat EVA and Nano-clay filled LDPE/EVA Composites”, National Journal of Technology, 4,(3), 28-32.
                                          97. Suresha, B, G. Chandramohan, P. R. Sadananda Rao, P. Sampathkumaran, S. Seetharamu, Vartha Venkateswarlu . (2006). “Friction and Slide Wear Characteristics of Glass-Epoxy and Glass-Epoxy Filled with SiCp Composites”, Indian Journal of Engineering and Materials Science, 13,535-541.
                                          98. Suresha, B(2006). “Influence of Load on the Friction and Wear behaviour in Glass-Epoxy Composite Systems”, Journal of CPRI, 3 (1) 51-57.
                                          99. Suresha, B, G. Chandramohan, N. M. Renukappa (2006).“Mechanical and Tribological behaviour of Glass-Epoxy Composites”, National Journal of Technology, 2 (1) 14-20.
                                          100. Suresha, B., G. Chandramohan, P. Sampathkumaran, and S. Seetharamu, (2008): "Mechanical and three‐body abrasive wear behaviour of SiC filled glass‐epoxy composites." Polymer Composites 29, no. 9, 1020-1025.
                                          101. Suresha, (2008): “Friction and Dry Slide Wear of Short Glass Fiber Reinforced Thermoplastic Polyurethane Composites”. International Journal of Material Research, Electronics and Electrical System, vol. 01, 1-9.
                                          102. Suresha, B., and Joong-Hee Lee, (2008): "Mechanical and three-body abrasive wear behaviour of PMMA/TPU blends." Materials Science and Engineering: A 492, no. 1-2 (2008): 486-490.
                                          103. Suresha, B., G. Chandramohan, and T. Jayaraju, (2008): "Three‐body abrasive wear behavior of E‐glass fabric reinforced/graphite‐filled epoxy composites." Polymer composites 29, no. 6, 631-637.
                                          104. Suresha, B., G. Chandramohan, P. R. Sadananda Rao, P. Sampathkumaran, and S. Seetharamu. (2007): "Influence of SiC filler on mechanical and tribological behavior of glass fabric reinforced epoxy composite systems." Journal of Reinforced Plastics and Composites 26, no. 6, 565-578.
                                          105. Suresha, B., G. Chandramohan, and N. M. Renukappa, (2007):  "Mechanical and tribological properties of glass–epoxy composites with and without graphite particulate filler." Journal of applied polymer science 103, no. 4, 2472-2480.
                                          106. Suresha, B., G. Chandramohan, P. Samapthkumaran, and S. Seetharamu, (2007):  "Investigation of the friction and wear behavior of glass-epoxy composite with and without graphite filler." Journal of reinforced plastics and composites 26, no. 1, 81-93.
                                          107. Suresha, B., G. Chandramohan, P. Samapthkumaran, and S. Seetharamu, (2007):  "Three-body abrasive wear behaviour of carbon and glass fiber reinforced epoxy composites." Materials Science and Engineering: A 443, no. 1-2, 285-291.
                                          108. Suresha, B. (2006): "The role of fillers on friction and slide wear characteristics in glass-epoxy composite systems." Journal of Minerals and Materials Characterization and Engineering 5, no. 0, 87.
                                          109. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, and S. Vynatheya, (2006): "Friction and wear characteristics of carbon-epoxy and glass-epoxy woven roving fiber composites." Journal of reinforced plastics and composites 25, no. 7, 771-782.
                                          International/National Conference Publications
                                          1. B. Suresha, NM Indusheakara, CA Varun, HN Venkatesh  and HR Vishwanath(2019): “Effect of Nano filler Reinforcement on Mechanical Properties of  Epoxy Composites”  International  Conference  on  Materials Engineering &Characterization (ICMECh'19),8-10 May 2019, Adhi College of Engineering & Technology, Adhi Nagar Sankarapuram, Chennai, Tamil Nadu- 631605.
                                          2. Rakshath S, B. Suresha, R. Sasi Kumar and I. Saravanan (2019): “Dry sliding and Abrasive Wear Behaviour of Al-7075 reinforced with Alumina and Boron Nitride particulates” International  Conference  on Materials Engineering &Characterization (ICMECh'19),8-10 May 2019, Adhi College of Engineering & Technology, Adhi Nagar Sankarapuram, Chennai, Tamil Nadu 631605.
                                          3. Mahadevswamy H S andB. Suresha (2019): “Role of HNTs on Mechanical and Thermal characteristics of Pineapple Fibre Reinforced Epoxy Composite” International Conference on Materials Engineering  & Characterization (ICMECh'19), 8-10 May 2019, Adhi College of Engineering & Technology, Adhi Nagar Sankarapuram, Chennai, Tamil Nadu 631605.
                                          4. Sangamesh S. Pasare and B. Suresha (2019):  “Mechanical and Tribological properties of Carbon Fabric Reinforced Epoxy Composites with and without Boron Nitride Filler” International Conference on Emerging Trends in Mechanical Engineering (E- TIME 2019), 09 – 10 August 2019, ST Joseph Engineering College-Mangaluru.
                                          5. Pooja Desai S, Rangaraj L, B Suresha (2019): “Role of SiC on Mechanical and Tribological Behaviour    of Mg Metal Matrix composites prepared by Powder Metallurgy Route”, International Conference on Emerging Trends in Mechanical Engineering (E -TIME 2019),09 – 10 August 2019, ST Joseph Engineering College-Mangaluru.
                                          6. B. Suresha, D. Sachin and C.B. Shiddalingesh (2019): “Morphology and Physico-mechanical Properties of Basalt Fiber Reinforced Epoxy Composites” International Conference on Advanced Trends in Mechanical & Aerospace Engineering(ATMA-2019), 7-9 November 2019, Dayananda Sagar University, Bangalore.
                                          7. Suresha B, Hemanth G, Apurva Rakesh and Adarsh K M (2019): “Role of Calcium Carbonate on Hardness and Fracture Toughness of Carbon fabric reinforced Epoxy Composites” International Conference on Advanced Trends in Mechanical & Aerospace Engineering (ATMA-2019),  7-9 November 2019, Dayananda Sagar University, Bangalore.
                                          8. Suresha.B, Hemanth G, MahadevswamyH.S(2019): “Effect of halloysite nanotubes on morphology and mechanical properties of alkali treated pineapple fiber reinforced epoxy composites” International Conference on Advanced Trends in Mechanical & Aerospace Engineering(ATMA-2019), 7-9 November 2019, Dayananda Sagar University, Bangalore.
                                          9. Divya G S, Suresha.B (2019): “Impact of nano-silicon dioxide on mechanical properties of carbon fabric reinforced epoxy composites” International Conference on Advanced Trends in Mechanical & Aerospace Engineering(ATMA-2019), 7-9 November 2019, Dayananda Sagar University, Bangalore
                                          10. B. Suresha, Roshan S Shenoy, Raviprasad Bhat (2018): “Optimization of Boron Nitride Filled Polyaryletherketone Composites Wear Using Taguchi Method” International Conference onAutomobile, Marine and Mechanical Engineering (ICAMME-2018), Sri Venkateswara College of Engineering, Sriperambudur, May 4-5, 2018
                                          11. G S Divya, B. Suresha R Keshavamurthy (2018): “Role of Metallic Fillers on Mechanical Properties and Tribological Behavior of Carbon Fabric Reinforced Epoxy Composite” International Conference on Automobile, Marine and Mechanical Engineering (ICAMME-2018), Sri Venkateswara College of Engineering, Sriperambudur, May 4-5, 2018.
                                          12. Krishna, B.Suresha, and Hemanth R, Kamaraj M (2018): “Solid Particle Erosion Behavior of Short Glass Fiber and Particulate Reinforced Polyoxymethylene/Polytetrafluroethylene Composites”, International Conference on Automobile, Marine and Mechanical Engineering (ICAMME-2018), Sri Venkateswara College of Engineering, Sriperambudur, May 4-5, 2018.
                                          13. Naveed Anjum, B. Suresha, S.L. Ajit Prasad(2018): “Characterization of Physico-Mechanical Properties of Sansevieria/Carbon Fiber Reinforced Hybrid Epoxy Composite With and Without Particulate Fillers”,International Conference on Automobile, Marine and Mechanical Engineering (ICAMME-2018), Sri Venkateswara College of Engineering, Sriperambudur, May 4-5, 2018.
                                          14. B Suresha, Sriraksha, R Hemanth (2018): “Mechanical Performance of HDPE/UHMWPE Hybrid Composites and Tribological Characterization using Taguchi Method” International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2018) August 16-18, 2018.
                                          15. B Suresha, Deepak N. Halliyavara (2018): “Effects of Basalt Fiber and ZirconiaLoading on Physico-Mechanical Behavior of PA66/HDPE Blend Composites”, International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2018), ASE College, Bengaluru August 16-18, 2018.
                                          16. B Harshavardhan, R Ravishankar, B Suresha, S Srinivas(2018): “Static and Dynamic Mechanical Performance of Carbon Fiber Reinforced Polyethersulfone Composites”, International cconference on Green Trends in Mechanical Engineering Sciences (GTMES) Malanad College of Engineering, Hassan, October 03-05, 2018.
                                          17. P.B. Bharath, B. Suresha, R. Hemanth, Deepak Halliyavar (2018): “Effect of Nanofillers on Physico-Mechanical Properties of Carbon Fiber Reinforced Phenolic Friction Composites”, International Conference on Advances in Materials and Manufacturing Applications (IConAMMA 2018), Amrita Vidyapeetham, Bengaluru August 16-18, 2018.
                                          18. B.Suresha, Achyutananta Padaki, Akash Jain, Bharath Kumar, Akshay A Kulkarni (2018): “Role of Zirconia on Mechanical Properties of HDPE/UHMWPE Blend Composites”, International Conference on Green Trends in Mechanical Sciences (GTMES-2018), MCE, Hassan October 3-5, 2018.
                                          19. Krishna, B. Suresha, H.M. Somashekar (2018): “Role of Fillers on Physico-Mechanical Properties of Pom Based Hybrid Composites”, International Conference on Green Trends in Mechanical Sciences (GTMES-2018), MCE, Hassan October 3-5, 2018.
                                          20. B.S.Kanthraju, B.Suresha (2018): “Role of Zirconia Filler on Mechanical Properties and Dry Sliding Wear of Glass-Basalt Hybrid Fabric Reinforced Epoxy Composites”, International Conference on Green Trends in Mechanical Sciences (GTMES-2018), MCE, Hassan October 3-5, 2018.
                                          21. B. Suresha, S.G. Channabasavanna, N. Siva Shanmugam(2018): “Microstructure and Abrasive Wear Behaviour of Nickel Based Hard facing Stainless Steel Deposited by Gas Metal Arc Welding”, International Conference on Green Trends in Mechanical Sciences (GTMES-2018), MCE, Hassan October 3-5, 2018.
                                          22. S. M. Darshan, B. Suresha (2018): “Mechanical and Abrasive Wear Behaviour of Waste Silk Fiber Reinforced Epoxy Bio-composites Using Taguchi Method”, 2nd International Conference on Recent Trends in Materials and Manufacturing Technologies, (ICRAMMT-2018), Marri Laxman Reddy Institute of Technology and Management Hyderabad, November 19-20, 2018.
                                          23. Santhy P. Kuruvilla, N. M. Renukappa, B. Suresha (2018): “Dynamic Mechanical Properties ofGlass Fiber Reinforced Epoxy Composites with Micro and Nanofillers”, 2nd International Conference on Advanced Technologies for Societal Application, Shri Vithal Education & Research Institute (SVERI), Pandhrapur, Maharashtra, Dec. 14-15, 2018.
                                          24. Hemanth R, B Suresha, M Sekar (2018): “Optimization of Tribological Parameters in Dry Sliding Wear Mode of Thermoplastic Co-polyester Elastomer Composites”, International Conference on Green Trends in Mechanical Sciences (GTMES-2018), MCE, Hassan, October 3-5, 2018.
                                          25. G.S. Divya, B. Suresha (2018): “Metallic Nanofillers Effect in Assessing the Abrasive Wear Performance of Carbon Fabric Reinforced Epoxy Composites”, Second International Conference on Polymer Composites 2018, Department of Mechanical Engineering, NITK, Surathkal, December 15-16, 2018.
                                          26. B. Sandeep,H.N. Divakar,B. Suresha (2018): “Mechanical Investigations of Carbon-Jute Hybrid Composites” National Conference on Materials, Mechanics, Manufacturing and Industrial Engineering, April 27-28, 2018
                                          27. B. Suresha, S.Seetharamu (2017): “Friction and Wear Response of Graphene –Reinforced Epoxy Nanocomposites. International Conference on Emerging Research in Civil, Aeronautical & Mechanical Engineering”, International Conference on Emerging Research in Civil, Aeronautical & Mechanical Engg. Nitte Menakshi Institute of Technology, Bengaluru, July 21, 2017.
                                          28. B Suresha, Kunigal N Shivakumar, R Hemanth(2017): “Study on the Effects of Polymer Nanofiber on Wear Behaviour of Fiber Reinforced Epoxy Nanocomposites in Abrasion and Fretting Wear Modes”, 26th International Conference on the Processing and Fabrication of the Advanced Materials, Department of BIN Convergence Technology and Polymer Nanoscience & Technology, 16-21, October 2017, Chonbuk National University, Jeonju, South Korea.
                                          29. B Suresha (2017): “State of the Art on Processing and Tribological Behaviour of Natural Fiber and Filler Reinforced Thermoset Based Polymer Composites” AICTE Sponsored National Seminar on “Environmental Friendly Material Processes for Surface Engineering, 12-13, October, 2017, Dept. of Mechanical Engg. Panimallar Engineering College,Chennai.
                                          30. B Suresha (2017): “Effect of Whisker on Abrasion Resistance of Epoxy based Composite Systems”, 7th National Conference on Novel Polymeric Materials (POLYCON- 2017) at Dept of Polymer Science & Technology, SJCE, Mysuru.
                                          31. B Suresha (2017): “Effect of Whiskers on Mechanical Properties of Epoxy Composite Systems” 7th National Conference on Novel Polymeric Materials (POLYCON- 2017) at Dept of Polymer Science & Technology, 15th And 16th September, 2017, SJCE, Mysuru.
                                          32. B Suresha (2017): “Effect of Cissusquadrangularis Stem Fiber Loading on Mechanical Properties of Polyester Composites”, 7th National Conference on Novel Polymeric Materials (POLYCON- 2017) at Dept of Polymer Science & Technology, 15th And 16th September, 2017, SJCE, Mysuru.
                                          33. PushparajPingulkar and Suresha. B (2016): “Free Vibration Analysis of Laminated Composite Plates Using Finite Element Method”INTERNATIONAL CONFERENCE ON CIVIL, MECHANICAL AND ENVIRONMENTAL ENGINEERING TECHNOLOGIES SVS college of Engineering ICCMEET2016 26-27, February 2016 Coimbatore Tamil Nadu, india
                                          34. B. Sandeep, B. Suresha and H.N. Divakar (2016): “Improving the strength and fracture      toughness of the thermoset polymers using micron and nano-sized fillers: A review, International Conference on Advanced Materials and Technology (ICMAT - 16)" from Feb 26 - Feb 28, 2016 at SJCE, Mysuru
                                          35. G. S. Divya, B. Suresha (2016): “Recent Developments of Natural Fiber Reinforced Thermoset   Polymer Composites and their Mechanical Properties”, International Conference on Advanced Materials and Technology (ICMAT - 16)" from Feb 26 - Feb 28, 2016 at SJCE, Mysuru.
                                          36. S. M. Darshan, B. Suresha, G. S. Divya(2016): “Waste Silk Fiber Reinforced Polymer Matrix      Composites: A Review”,International Conference on Advanced Materials and Technology  (ICMAT - 16)" from Feb 26 - Feb 28, 2016 at SJCE, Mysuru..
                                          37. B. S. Kanthraju , B. Suresha (2016): “Enhancement of Mechanical Properties and Wear Resistance of Epoxy: Glass Fiber, Basalt Fiber, Polytetrafluoroethylene and Graphite”International Conference on Advanced Materials and Technology (ICMAT - 16)" from Feb 26 - Feb 28, 2016 at SJCE, Mysuru.
                                          38. Krishna, B. Suresha, S.S. Kallesh, R.Hemanth(2016): “Effect of Fillers on Erosive Wear    behavior of Polyoxymethylene/ Polytetrafluoroethylene Blend and their Composites: AStatistical Approach”,International Conference on Advanced Materials and Technology (ICMAT - 16)  from Feb 26 - Feb 28, 2016 at SJCE, Mysuru.
                                          39. Hemanth R. B.Suresha and Sekar M(2016): “Effect of Short Glass Fiber and Fillers on Friction and wear performance of Multi-Phased Thermoplastic Copolyester Elastomer composites”, Second Indo-Canadian Symposium on Nano Science & Technology – 2016 (ICSNST’16) Feb.18-19, 2016 at NIE mysuru
                                          40. B.Suresha, R.M.Devrajaiah, Manpinder Singh and Hemanth R(2016): “Optimization of testing parameters on Two-Body Abrasive Wear Behaviour of Nano-oMMT Filled Carbon-Epoxy Composites Based on the Taguchi Method”, Second Indo-Canadian Symposium on Nano Science & Technology – 2016 (ICSNST’16) Feb.18-19, 2016 at NIE, Mysuru
                                          41. Nithin Kundachira Subramani, SachhidanandaShivanna, ShilpaKasargodNagaraj, Suresha B, Jagajeevan Raj B.M.,and HatnaSiddaramaiah(2016): “Optoelectronic Behaviors of UV shielding Ca-doped ZrO2 Reinforced Polycarbonate Nanocomposite Films: An Optical View”International Conference on Material Sciences (SCICON' 16)"19 to 21 Dec 2016 at Amrita Vishwa Vidyapeetham Coimbatore Campus, Coimbatore – 641112 India.
                                          42. B. Suresha, Nithin Kundachira Subramani (2016): “Friction and dry sliding wear behaviour of carbon fabric reinforced epoxy with and without silicon carbide whiskers”,International Conference on Material Sciences (SCICON' 16) " 19  to 21 Dec  2016 at Amrita VishwaVidyapeetham Coimbatore Campus, Coimbatore – 641112 India.
                                          43. Sachhidananda S, Suresha B, VasanthPatild, Shilpa K.N., NithinKundachiraSubramania and Siddaramaiah (2016): “Metallic Nanofiller Reinforced HPMC Films For Vegetable Packaging Applications”International Conference on Material Sciences (SCICON' 16) " 19  to 21 Dec  2016 at Amrita VishwaVidyapeetham Coimbatore Campus, Coimbatore – 641112 India.
                                          44. K. Prabu, B.Nalini, B. Suresha, M. Sekar(2016): “Tribological study of anti-friction lubricating gear oil with nano additives of Abrasive particles”, International Conference on Advanced Material Technologies (ICAMT)-2016 27th and 28th  December 2016, Dadi Institute of Engineering and Technology (DIET), Visakhapatnam, Andhra Pradesh, India .
                                          45. Hemanth Rajashekaraiah, Sekar Mohan, Suresha Bheemappa (2015): “Abrasive wear behavior of thermoplastic copolyester elastomer composites”,International conference on Advances in Materials and Materials Processing (AMMP) 2015, Karunya University, Coimbatore, TamilNadu, January 2015.
                                          46. B. Suresha and R.M. Devarajaiah(2015): “Influence of nano-sized clay on mechanical and abrasive wear behaviour of carbon fabric reinforced epoxy composites”, International Conference on Advancement of Polymeric Materials Feb 20-22 2015 (APM2015) at IISc, Bengaluru India
                                          47. Hemanth .R1, Suresha .Band Sekar .M(2015): “Role of fillers on mechanical properties of selected thermoplastic composites”, International Conference on Advancement of  Polymeric Materials  Feb 20-22 2015 (APM2015) at IISc, Bengaluru India.
                                          48. B. Suresha and Manpinder S. Saini(2015): “Fabrication and mechanical characterization of carbon fabric reinforced epoxy with ALUMINA and MOLYBDENUM DISULFIDE Fillers”,INDO-BRAZIL Bilateral International Conference onAdvanced Materials and Manufacturing – ICAMM2015,Tirunelveli-TN/INDIA, March 27-28, 2015.
                                          49. Krishna and B. Suresha (2015): “Physico-mechanical properties of short glass fiber and particulate reinforced polyoxymethylene/polytetrafluroethylene composites”, International Conference on Nanostructured Polymeric Materials and Polymer Nanocomposites (ICNPM2015), 13-15 Nov 2015 at Mahatma Gandhi University, Kottayam, Kerala, India,
                                          50. B.S. Kanthraju, B. Suresha, and Manpinder S. Saini.(2015): “Effect of type and filler loading on the static mechanical properties of glass-basalt hybrid fabric reinforced epoxy composites”,11th  International Conference on Production, Mechanical and Automobile Engineering (ICPMAE 2015),11th Oct 2015, Bangalore
                                          51. B Suresha, Manpinder S Saini(2015):“Influence of Organo-Modified Montmorillonite Nanolayers on Static Mechanical and Dynamic Mechanical Behavior of Carbon/ Epoxy composites”, Journal of Composite Materials,Volume 13, 2015, pp 1-13.
                                          52. B Suresha (2014): “Optimization of Tribological Parameters in Abrasive Wear Mode of Carbon-Epoxy Hybrid Composites”, Materials and Design Vol. 59, 2014, pp 38–49.
                                          53. B Suresha (2014): “Effects of Fibers and Fillers on Mechanical Properties of Thermoplastic Composites”, Indian Journal of Advances in Chemical Science Vol. 2, 2014
                                          54. B Suresha (2014): “Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites”, Advances in Tribology- Hindawi Publishing Corporation. Vol. 2014, 2014
                                          55. B Suresha (2014): “Physico-Mechanical Behaviour of Thermoplastic Copolyester Elastomer/Polytetrafluoroethylene Composites With Short Fibers and Micro Fillers” Journal of Composite materials, 22nd July 2014, pp. 1-13.
                                          56. B Suresha (2014): “Effect of  Fiber Length And Loading of Sansevieria Fiber on Dry Sliding Wear Behaviour of Poly Ester Composites”. Technology Letters, Vol. 1, Issue No. 4, 2014, pp 14-18
                                          57. B Suresha (2014): “Application of grey based Taguchi Method for abrasive wear assessment of MoS2 filled carbon –epoxy composites”. Technology Letters, Vol. 1,Issue No. 7, 2014, pp. 19-23
                                          58. B Suresha (2014): “Wear Behaviour of Coir Reinforced Treated and Untreated Hybrid Composites” .International Journal of Innovative Research and Development, Vol. 3 Issue No.5, 014, pp 632-639.
                                          59. B Suresha (2014): “Effect of Short Glass Fiber and Fillers on Dry Sliding Wear Behaviour of Thermoplastic Co Polyester Elastomer Composites.” International Journal of Mechanical Engineering and Technology, Vol. 5, Issue No.9, 2014, pp 71-80
                                          60. B Suresha, Mohammed Ismail, S Puneeth (2014): “The Effect of Addition of Nano Fillers on Three Body Abrasive Wear Behaviour of Uni-Directional Glass Fiber Reinforced Epoxy Composites”. International Journal of Mechanical Engineering and Technology, Vol. 5, Issue No. 9, 2014, pp 81-85
                                          61. B Suresha, Mohammed Ismail(2014): “Two Body Abrasive Wear Behaviour of Short Glass Fiber and Particulate Filled Polymethylmethacrylate Composites”, International Journal of Mechanical Engineering and Technology, Vol. 5, Issue No. 9, 2014, pp 86-90
                                          62. B Suresha (2014): “Optimization of Dry Sliding Wear Behaviour of Zirconium Filled Bismaleimide Nanocomposites” .International Journal of Mechanical Engineering and Technology, Vol. 5, Issue No. 9,2014, pp. 62-70
                                          63. B Suresha (2014): “Investigations on Three-Body Abrasive Wear Behaviour of Composite Brake Pad Material” , Plastic and Polymer Technology, Vol. 3, Issue No.1, 2014, pp. 10-18.
                                          64. B Suresha(2014): “Effect of Short Fiber Reinforcement on Mechanical Properties of Hybrid Phenolic Composites”. Journal of Materials, Vol. 2014, 2014, pp. 1-10
                                          65. B Suresha (2014): “Investigate The Fiber Reinforcement  Effect on Viscoelastic Response and Thermal Stability of Hybrid Friction Composite”. Applied Mechanics and  Materials, Vol. 591, 2014, pp  132-136.
                                          66. B Suresha (2014): “ Effect of Organically Modified Montmorillonite Clay on Wear Behaviour of Naturally Woven Coconut Sheath/Polyester Composites”, Journal of Engineering Tribology, Vol. 228, Issue No. 5, 2014, pp 483-497
                                          67. B Suresha (2014): “ Effect of Fibers and Fillers on Mechanical Properties of Thermoplastic Composites”. Indian Journal of Advances in Chemical Sciences, Vol. 2, 2014, pp. 28-35.
                                          68. B Suresha (2014): “ Application of Grey Based Taguchi Method for Abrasive Wear Assessment of Mos2 Filled Carbon-Epoxy Composites” International Conferences on Advances in Tribology, 21-24 Feb 2014, Calicut, Kerala, India
                                          69. B Suresha (2014): “Effect of Fiber Length And Loading of  Sansevieria Fiber on Dry Sliding Wear Behaviour of Polyester  Composites” .International Conferences on Advances in Tribology, 21-24 Feb 2014, Calicut, Kerala, India.
                                          70. B Suresha (2014): “Role of Short Fibers and Micron Sized Ceramic Fillers of Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer/ Polytetrafluoroethylene Blend Composites” International Conferences on Advances in Tribology, 21-24Feb 2014, Calicut, Kerala, India.
                                          71. B Suresha (2014): “Effect of Short Glass Fiber and Fillers on  Dry Sliding Wear Behaviour of Thermoplastic Copolyester Elastomer Composites”. International Conference on Current Trends in Engineering and Management 17-19 July 2014, VVCE, Mysore,Karnataka, India.
                                          72. B Suresha (2014): “Abrasive Wear Behaviour of Teflon Filled Polyamide 6 with Short Glass Fiber and Particulate Fillers”. International Conference on Current Trends in Engineering and Management 2014, 17-19 July 2014, VVCE, Mysore, Karnataka, India.
                                          73. B Suresha (2014): “The Effect of Impingement Angle on Erosion Rates of Polyacetol Based Composites”. International Conference on Current Trends in Engineering and Management 17-19 July 2014, VVCE, Mysore,
                                          74. B Suresha, V Jayasheela Bai, M Mohan Ram (2014): “Effect of Fiber and Filler Loading on Two-Body and Three-Body Abrasive Wear Behaviour of Polyamide 66 Composites”, International Conference on Current Trends in Engineering and Management, 17-19 July 2014, VVCE, Mysore, Karnataka, India
                                          75. B Suresha (2014): “Role of Nanofiller Addition on Physical And Mechanical Properties of Glass Fiber Reinforced Epoxy Composites” International Conference on Innovations and Emerging Trends in Mechanical Engineering (IETME-2104) 17th May 2014, Organized by Department of Mechanical Engineering, Nagarjuna College of Engineering & Technology, Bangalore
                                          76. B Suresha (2014): “Dynamic Mechanical Analysis and Abrasive Wear Behaviour of Carbon- Epoxy with Molybdenum Disulfide” International Conference on Innovations and Emerging Trends in Mechanical Engineering (IETME-2104) 17th May 2014, Organized by Department of Mechanical Engineering, Nagarjuna College of Engineering & Technology, Bangalore
                                          77. B Suresha (2014): “Dynamic Mechanical Analysis of Short Sisal and Banana Fiber Reinforced Polyester Composites” International Conference on Innovations and Emerging Trends in Mechanical Engineering (IETME-2104) 17th May 2014, Organized by Department of Mechanical Engineering, Nagarjuna College of Engineering & Technology, Bangalore
                                          78. B Suresha (2014): “Effect of Zirconium Oxide Particle Loading on the Sliding Wear Behaviour of the Bismaleimide Nanocomposites”POLYCON 2014, 25-26 April, 2014, SJCE, Mysore, Karnataka, India.
                                          79. B Suresha (2014): “Influence of fillers on mechanical,morphological and thermal properties of glass fiber reinforced thermoplastic Copolyester Elastomer Hybrid Composites” POLYCON 2014, 25-26 April,2014, SJCE, Mysore, Karnataka, India.
                                          80. B Suresha (2014): “Mechanical and Tribological Properties of Nanopaticulate Reinforced Polymer Composites” National Conference on Nano Structured Materials 2014, 12-13 Aug 2014, NSS Hindu College, Kottayam, Kerala, India.
                                          81. B Suresha (2014): “Role of Fiber, Micro and Nano Fillers on Physico-Mechanical Behaviour of Thermoplastic Copolyester Elastomer Composites”. National Conference on Nano Structured Materials 2014, 12-13 Aug 2014, NSS Hindu College, Kottayam, Kerala, India.
                                          82. B Suresha (2014): “Dry Sliding Wear Behavior of Carbon Fabric Reinforced Epoxy Composite with and without Fillers” POLYCON 2014, 25-26 April, 2014, SJCE, Mysore, Karnataka, India.
                                          83. B Suresha (2014): “Role of functional fillers on mechanical properties and wear behavior of carbon fabric reinforced epoxy hybrid composites” National Level Seminar on Nanotectnology 26th Sept 2014 conducted by P.G. & Research Dept. of Chemistry, C. Abdul Hakeem College, Melvisharam, Tamil Nadu,
                                          84. B Suresha (2013): “Investigation of Three-Body Abrasive Wear Behavior of Particulates Filled Short Glass/Carbon Fiber Reinforced Polyamide66/PTFE Blend Composites- A Taguchi’s Approach” ,International conference on Surface Engineering For Research and Industrial Applications - SERIA 2013, 07-09 August 2013. 
                                          85. B Suresha (2013): “Abrasive Wear Behavior o Short Fiber and Particluate Reinfirced Thermoplastic Copolyester Elastomer / PTFE Blend Composites”, International conference on Surface Engineering For Research and Industrial Applications - SERIA 2013, 07-09 August 2013 
                                          86. B Suresha (2013): “Role of Alumina Filler Loading on Dry Sliding Wear Behaviour of Carbon Fabric Reinforced Epoxy Composites” International Conference on Emerging Trends in Engineering and Management” (ICETEM-2013) November 29-30, 2013 
                                          87. B Suresha (2013): “Physioc-Mechanical and Abrasion Resistance of Coconut Coir Sheath Fiber Reinforced Polyester Nanocomposites “International conference on Advanced Polymeric Materials 2013 (ICAPM 2013) 11-13 Oct 2013 
                                          88. B Suresha (2013): “Characterization of Thermoplastic Co-Polyester Elastomer /Polytetrafluoroethylene Blend and Their Composites”International conference on Advanced Polymeric Materials 2013 (ICAPM 2013) 11-13 Oct 2013 
                                          89. B Suresha (2013): “Effect of glass fiber reinforcement on static and dynamic mechanical behavior of banana fiber reinforced polyester composites” International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMT-2013) 3-4 May 2013 
                                          90. B Suresha (2013): “Prediction of Thrust Force and Torque using Step Drill in Drilling of Alumina Filled Glass-Fabric Reinforced Epoxy Composites by Taguchi Method” International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMT-2013) 3-4 May 2013 
                                          91. B Suresha (2013): “Effect of filler addition on the tensile and flexure properties short glass fiber reinforced polyamide/polytetrafluoroethylene blend” International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences, (AMMT-2013) 3-4 May 2013 
                                          92. B Suresha (2013): “Effect of micro filler additions on the flexure and impact properties of short glass fiber reinforced Arnitel/Polytetrafluoroethylene blend” International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMT-2013) 3-4 May 2013
                                          93. B Suresha(2012): “Triboperformance of Silicon Dioxide Filled Glass Fabric Reinforced Epoxy Composites, National Conference on Thrust Areas in Engineering, NCTAE-2012, during January 20-21, 2012,Global Academy of Technology, Bangalore, Karnataka, India.
                                          94. B Suresha (2012): “Investigations on Mechanical and Erosive Wear Behaviour of Cenosphere Filled Carbon‐EpoxyComposites International Conference on Mechanical, Automotive and Materials Engineering (ICMAME-2012) held at Dubai on Jan 7 2012.
                                          95. B Suresha(2012): “Three Body Abrasive Wear Behaviour of Silicon Dioxide Filled Glass Fabric Reinforced Epoxy Composites” International Conference on Current Trends in Engineering and Management (ICCTEM-2012), during 12-14 December 2012,Vidyavardhaka College of Engineering, Mysore, Karnataka, India.
                                          96. B Suresha(2011): “Mechanical and three-body abrasive wear behaviour of glass-fabric reinforced epoxy composites filled with SiC and SiO2 particles, 5th national conference on Plastic and Rubber technology (NCPRT), 22-23rd April 2011, SJCE, Mysore-6, Karnataka, India.
                                          97. B Suresha(2011): “Recycling of fiber and filler reinforced thermoset polymer composites materials: a review, National Conference on Development in Composite Materials and processes (DCMP-2011) 7th-9th April, 2011, Don Bosco Institute of Technology, Bangalore, India.
                                          98. B Suresha(2011): “Role of SiC and Cu additions on mechanical and three-body abrasive wear behaviour of phenol formaldehyde composites. 5th National conference on Plastic and Rubber Technology (NCPRT), 22-23rd April, 2011, SJCE, Mysore-6, Karnataka, India.
                                          99. B Suresha(2011): “Mechanical and three body abrasive wear behavior of glass epoxy composites filled with SiC and SiO2 particles,49th National Metallurgists’ day and 65th Annual Technical Meeting of The Indian Institute of Metals 13-16 November 2011
                                          100. B Suresha(2011): “Investigation of solid particle erosion behavior of carbon-epoxy composites with and without fly ash cenospere, 49th National Metallurgists’ day and 65th Annual Technical Meeting of The Indian Institute of Metals 13-16 November 2011
                                          101. B Suresha (2011): “Role of silicon dioxide filler on dry sliding wear behaviour of epoxy nanocomposites. The Nineteenth Annual International Conference on COMPOSITES/NANO ENGINEERING (ICCE-19), July 24-30, 2011 in Shanghai, China.
                                          102. B Suresha(2011): “Effect of different Abrasion behaviour of Silicon dioxide filled Epoxy nano Composites. Conference on COMPOSITES/NANO ENGINEERING (ICCE-19), July 24-30, 2011 in Shanghai, China.
                                          103. B Suresha(2011): “Friction and dry sliding wear behaviour of filler filled Phenolic composite systems.    “International Conference on Design and Advances in Mechanical Engineering (ICDAAME-2011)” 16th – 17th December, 2011, SKP Engineering College, Tiruvannamalai-606 611.
                                          104. B Suresha(2011): “Mechanical properties of carbon-epoxy composites with and without organo-montmorillonite filler, International conference on composites for 21st century: Current and future trends (ICC-CFT2011),4th-7th January, 2011 Department of Aerospace Engineering, India Institute of science, Bangalore- 12, India.
                                          105. B Suresha(2011): “Effect of micro-filler additions on physic-mechanical properties of glass fabric reinforced epoxy composites, First International conference on composites and nanocomposites (ICNC-2011), 7th- 9th January, 2011, Mahatma Gandhi University, Athirampuzha, Kottayam-686028, Kerala, India.
                                          106. B Suresha(2011): “Mechanical and three-body abrasive wear behaviour of glass-fabric reinforced epoxy composites filled with SiC and SiO2 particles, Recent Advances in Mechanical Engineering (INCRAME-2011), 21st& 22nd April, 2011, Adayalapattu, Tamilnadu, India.
                                          107. Mechanical and Three-body Abrasive Wear Behavior of Glass-Epoxy Composites Filled with SiC and SiO2 particles. The 49th National Metallurgists’ Day (NMD) and the 65th Annual Technical Meeting (ATM) of the Indian Institute of Metals (IIM) held from 13 to 16 November 2011 at the sprawling Leonia International Centre for Exhibitions and Conventions Shameerpet, Hyderabad.
                                          108. B Suresha(2011): “Dry and Slurry Abrasion of OMMT-filled Carbon-Epoxy Nanocomposites. The 49th National Metallurgists’ Day (NMD) and the 65th Annual Technical Meeting (ATM) of the Indian Institute of Metals (IIM) held from 13 to 16 November 2011 at the sprawling Leonia International Centre for Exhibitions and Conventions Shameerpet, Hyderabad.
                                          109. B Suresha(2011): “Friction and Dry Sliding Wear Behaviour of Filler Filled Phenolic Composites Systems, International Conference on Design and Advances in Mechanical engineering, 16-17th Dec 2011, SKP Engineering College, Thiruvannamalai, Tamilnadu, India
                                          110. B Suresha(2010): “Experimental study on drilling of particulate of particulate filled glass-epoxy  composites manufactured by hand lay-up technique”, Advanced Materials, Manufacturing, Management and Thermal sciences AMMMT – 2010 18-19th
                                          111. Suresha, B, B. N. Ramesh, K. M. Subbaya,  G. Chandramohan. (2010): “Mechanical and Three-body abrasive wear behavior of kaolin filled epoxy composites”, A Review. Advanced Materials, Manufacturing, Management and Thermal sciences AMMMT – 2010 18-19th
                                          112. B Suresha(2010): Microstructure, Mechanical and Tribological characterization of particulate filled thermoset polymer nano-composites A Review. Advanced Materials, Manufacturing, Management and Thermal sciences AMMMT – 2010 18-19th 
                                          113. M. G. VeenaN. M. RenukappaK. N. Shivakumar,  B Suresha (2010):  Influence of SiO2 filler content on mechanical and electrical resistivity behavior of epoxy nano-composites” Aip conference proceedings, Oct’ 10 1276(1) 219-226
                                          114. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.Influence of SiO2 content in epoxy-SiO2 nanocomposites on mechanical and electrical resistivity behavior, International Conference on Advanced Nanomaterials and Nanotechnology (ICANN-2009), Dec 9th-11th2009, Indian Institute of Technology, Guwahati.  
                                          115. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Two-body abrasive wear behaviour of particulate filled carbon fabric reinforced epoxy composites, NMDATM 2009,14th – 16th Nov 2009 at  Kolkata.
                                          116. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.Investigation on three-body abrasive wear behaviour of carbon fabric reinforced epoxy composite with and without SiC filler, NMDATM 2009,14th – 16th Nov 2009 at  Kolkata.
                                          117. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Mechanical and erosive wear behaviour of particulate filled PA66/PP nanocomposites,  NMDATM 2009,14th – 16th Nov 2009 at  Kolkata.
                                          118. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Three-body abrasive wear behaviour of cenosphere filled epoxy composites, NMDATM 2009, 14th – 16th Nov 2009 at Kolkata.
                                          119. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Influence of load on dry sliding wear and friction behaviour of carbon and glass fabric reinforced vinyl ester composites. National Conference on “New Advances in Thermal, Design, Materials and Manufacturing Engineering-2009 (NATDMME-09) 5th-7th March 2009 at MCE, Hassan, Karnataka.
                                          120. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Experimental investigations on three-body abrasive wear behaviour of aluminum oxide filled carbon-epoxy composites. National Conference on Advances in Mechanical Engineering (AME’09) 30-31 March 2009 at Don Bosco Institute of Technology, Bangalore.
                                          121. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Investigations on the mechanical and erosive wear behaviour of clay filled PA66/PP nanocomposites. National Conference on Advances in Mechanical Engineering (AME’09) 30-31 March 2009 at Don Bosco Institute of Technology, Bangalore.
                                          122. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Experimental investigations on three-body abrasive wear behaviour of alumina filled glass-epoxy composites   National Conference on Advances in Mechanical Engineering (AME’09) 30-31 March 2009 at Don Bosco Institute of Technology, Bangalore.
                                          123. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Influence of micro and nanofiller on mechanical and abrasive wear behaviour of Polyamide66/Polypropylene nanocomposites. National Conference on “Recent Trends in Crystal Growth, Thin Films and Nano-Structured Materials. 5th and 6th August 2009, Aditnar College of Arts and Science, Tiruchendur-628216, Tamil Nadu, India.
                                          124. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Effect of SiO2 Filler Loading  on Three – Body Absaive Wear Behavior of Glass – Vinyl Ester Composites, “Advances in Mechanical Engineering – 09” (AME- 09)Proceedings of  the National Conference AME2009, VVIET, 5th Oct 2009.
                                          125. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.Effect of SiO2 Filler Loading  on Three – Body Abrasive Wear Behavior of Glass – Polyester Composites, “Advances in Mechanical Engineering – 09” (AME- 09)Proceedings of  the National Conference AME2009, VVIET, 5th Oct 2009.  
                                          126. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2009): Influence of SiO2 filler content on mechanical and electrical resistivity behavior of epoxy nano-composites”, AIP conference proceedings, ISSN: 0094243X, Oct’ 10; vol. 1276, issue 1 : pp. 219-226, 2009.
                                          127. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2008): ‘Two-body abrasive wear behaviour of low density polyethylene/EVA blends’, ‘Recent Advances in Manufacturing & Management-(RAMM-2008), 8th and 9th February 2008, Annamalainagar, Chidambaram, Tamilnadu.
                                          128. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2008): Influence of graphite filler on two-body abrasive wear behaviour of carbon fabric reinforced epoxy composites   International Conference on Industrial Tribology-2008 held at New Delhi 6-8 Nov 2008
                                          129. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2008): Mechanical and Three-body Abrasive Wear Behaviour of Graphite Filled Carbon-Epoxy Composite Systems. International conference on “Processing and fabrication of advanced materials” (PFAM XVII), 2008 held at India Habitat Centre, New Delhi, India Dec. 15 - 17, 2008.
                                          130. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2008): The abrasive wear behaviour of carbon fabric reinforced epoxy composite with graphite filler   2nd International conference on Advanced Tribology 2008 (iCAT 2008) 3-5 Dec 2008 at NUS, Singapore.
                                          131. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu, (2008): Effect of silica sand and quartz abrasives on three-body abrasive wear behaviour of SiO2 filled epoxy nanocomposites, NMDATM 2009,14th – 16th Nov 2009 at  Kolkata.
                                          132. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu.(2008): ‘Effect of graphite filler additions on Two-body abrasive wear behaviour of carbon fabric reinforced epoxy composites   MACRO-08: National Conference on Eco-friendly Plastic and Rubber systems (NCEPRS) 19-20 May 2008.
                                          133. Suresha, B., G. Chandramohan, P. P. Samapthkumaran, S. Seetharamu, Anil Shiratti. (2007): ‘Abrasion Resistance of Filled Epoxy Composite System’, National Conference on Advances in Mechanical Sciences (AIMS- 2007), during March 22-24, 2007 at Kumara Guru College of Technology, Coimbatore, Tamilnadu.
                                          134. Suresha, B, G. Chandramohan, P. Samapthkumaran, S. Seetharamu (2007): ‘Influence of three-dimensional glass fabric on three-body abrasive wear behaviour of vinyl ester composites’, International Conference on Recent Advances in Composite Materials (ICRACM-2007), Feb 21-24, 2007, Indian Habitat Centre, Delhi. 
                                          135. Suresha, B., G. Chandramohan, Siddaramaiah, (2007): ‘Investigations on three-body Abrasive Wear behaviour of Silicon carbide and Graphite Filled Glass-Vinyl ester Composites’, Intl Conf. of KSME’07, from 30th May  to 1st June, 2007, at Busan, South Korea.
                                          136. Suresha, B., G. Chandramohan, Siddaramaiah, (2007): ‘Effect of Short Glass Fiber on three-body Abrasive Wear behaviour of Polyurethane Composites’, ICAP-2007, 24-27 June 2007, Bankhok, Tailand.
                                          137. Suresha, B., G. Chandramohan, T Jayaraju, (2007): ‘Mechanical and three-body abrasive wear behaviour of three-dimensional glass fabric reinforced vinyl ester composite’, International Conference on Materials for Advanced Technologies 2007 (ICMAT 2007), 1-6 July 2007, Singapore -Suntec Singapore International Convention & Exhibition Centre.
                                          138. Suresha, B., G. Chandramohan, M. Ismail, (2007): ‘Three-body abrasive wear behaviour of carbon and glass fabric reinforced vinyl ester composites’, International Conference on Materials for Advanced Technologies 2007 (ICMAT 2007), 1-6 July 2007, Singapore -Suntec Singapore International Convention & Exhibition Centre.
                                          139. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2007): ‘Effect of Abrasives type on the Three –body Abrasive Wear behaviour of Glass – Vinyl ester and Carbon – Vinyl ester composites’. International Conference on Polymeric Materials in Power Engineering-2007 (ICPMPE-2007), 4-6 Oct 2007, Central Power Research Institute, Bangalore.
                                          140. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, Kunigal N Shivakumar. (2007): ‘Tribological behaviour of carbon-carbon composites’,10th International Conference on Advanced Materials (IUMRS-ICAM-2007),8th -13th Oct 2007, Hotel Grand Ashoka, Bangalore.
                                          141. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, ‘Investigations on mechanical and abrasive wear behaviour of carbon and glass fabrics reinforced vinyl ester composites’,  Proceedings of the STLE/ASME International Joint Tribology Conference (IJTC2007), October 22-24, 2007, San Diego, California, USA.
                                          142. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2007): ‘Investigations on the Influence of SiC filler addition on abrasive wear of glass-epoxy composites’, International Symposium-NMDATM 2007, 13th -16th November 2007, Nehru Centre, Mumbai.
                                          143. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2007): ‘Investigations on mechanical and abrasive wear behaviour of carbon fabric reinforced epoxy composite with and without SiC filler’, International Symposium-NMDATM 2007, 13th -16th November 2007, Nehru Centre, Mumbai.
                                          144. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2007): ‘Mechanical and Two-body abrasive wear behaviour of glass/carbon fabric reinforced vinyl ester composites’, National Conference on Advances In Manufacturing And Industrial Engineering” (NCOAIMAIE-2007), 12th to 14th July-2007 at VNR VignanaJyothi Institute of Engg and Tech, Bachupally, (Via) Kukatpally, Hyderabad.
                                          145. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu,(2007): ‘Three-body abrasive wear behaviour of  PMMA/TPU blends’, National conference on Advances in Materials and Manufacturing Process (AMMP2007), 5th and 6th October 2007, University B.D.T. College of Engineering, Davangere, Karnataka.
                                          146. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2007): ‘Friction and Dry Slide Wear Behaviour of short glass fiber reinforced thermoplastic polyurethane composites’, National conference on Advances in Materials and Manufacturing Process (AMMP2007), 5th and 6th October 2007, University B.D.T. College of Engineering, Davangere, Karnataka.
                                          147. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu,(2007): ‘Dry slide wear behaviour of LDPE/EVA polyblends’, National conference on Advances in Materials and Manufacturing Process (AMMP2007), 5th and 6th October 2007, University B.D.T. College of Engineering, Davangere, Karnataka.
                                          148. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2007): ‘An Experimental Investigation on Friction and Wear of Epoxy Resin Reinforced with Carbon-Glass Woven Roving Fiber Composites’, International Conference on Resource Utilization and Intelligent Systems(INCRUIS-2006)during January4-6, 2006 at Kongu Engineering College, Perundurai, Erode, Tamilnadu.
                                          149. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2007): ‘Friction and Slide Wear Characteristics of Glass-Epoxy and Glass-Epoxy Composites with different Fillers’, International Conference on Advance Material Processing and Characterization (AMPC-2006) during August 28-30, 2006 at Anna University, Chennai, Tamilnadu.
                                          150. B N Ravi Kumar, Bheemappa Suresha,M Venkataramareddy(2007): ‘Mechanical and Tribological Properties of Glass-Epoxy Composites with and without Graphite Particulate Filler’, Global Manufacturing and Innovation (GIC-CIT-2006), during July 27-29, 2006 at Coimbatore Institute of Technology, Coimbatore, Tamilnadu.
                                          151. B N Ravi Kumar, Bheemappa Suresha,M Venkataramareddy(2007): ‘Influence of  Graphite Filler addition on abrasive Wear behaviour of Bi-directional E-glass fabric reinforced Epoxy Composite System’, International Conference on Frontier technologies-Need for Business, Industry and Education, during September 6-8, 2006 at Adhiamman College of Engineering, Hosur, Tamilnadu.
                                          152. B. Suresha, (2006): ‘Friction and Dry Slide Wear behaviour of short Glass Fiber Reinforced Polymeric Composites’, International Symposium on Steel for Automotives, International Symposium-NMD-ATM 2006, during November 13-16, 2006 Jamshedpur.
                                          153. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2006): ‘Abrasive Wear of Glass Fabric/Particulate Filled Polymeric Composite systems’, International Conference on Industrial Tribology (ICIT-2006), during November 29-December 1, 2006 at Indian Institute of Science, Bangalore, Karnataka.
                                          154. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2006): ‘Influence of Silicon carbide and Graphite Filler additions on Three-body Abrasive Wear behaviour of Glass-Vinyl ester Composites’, International Conference on Recent Advances in Materials and Processing RAMP-2006, during December 15-16, 2006 at PSG College of Technology, Coimbatore, Tamilnadu
                                          155. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu,(2006): ‘Effect of Normal Load and Sliding Velocity on Friction and Wear behaviour of Carbon Fiber Reinforced Epoxy Composites’, International Conference on Recent Advances in Materials and Processing RAMP-2006, during December 15-16 at PSG College of Technology, Coimbatore, Tamilnadu.
                                          156. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2006): ‘An Experimental Investigation of Tribological Properties of E-Glass Epoxy Composite with the addition of Graphite Filler’, National Conference on Recent Advance in Manufacturing Technology (RAMT-2006), during February 3, 2006 at Velammal College of Engineering, Chennai, Tamilnadu.
                                          157. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2006): ‘Effect of Filler addition on the Abrasive Wear of Glass Reinforced Epoxy Composites’, National Conference on Recent Advance in Manufacturing Technology (RAMT-2006), during February 3, 2006 at Velammal College of Engineering, Chennai, Tamilnadu.
                                          158. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2006): ‘Evaluation of Mechanical properties of E-Glass-Polyester and SiC Particulate Filled E-Glass-Polyester Composites’, National Conference on  Recent Advance in Manufacturing Technology (RAMT-2006), during February 3, 2006 at Velammal College of Engineering, Chennai, Tamilnadu.
                                          159. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2006): ‘Three-body Abrasive Wear of Glass-Epoxy Composite with and without SICp Filler’, National Conference on Advances in Manufacturing Engineering (NCME) during April 21-22, 2006at Sona College of Technology, Selam, Tamilnadu.
                                          160. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2006): ‘Investigation of Tribological behaviour of Carbon-Epoxy Composite system’, National Conference on Recent Trends in Mechanical Engineering (RTME), during November 17-18, 2006 at Sri Jayachamarajendra Engineering College, Mysore, Karnataka.
                                          161. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2006): ‘Effect of Fiber orientation on Friction and Wear characteristics of Carbon-Epoxy Composites’, National Conference on Recent Trends in Mechanical Engineering (RTME), during November 17-18, 2006 at Sri Jayachamarajendra Engineering College, Mysore, Karnataka.
                                          162. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, Mohan N, (2006): ‘Evaluation of Mechanical Properties of Glass-Epoxy and SIC particles Filled Glass-Epoxy Composites’, International Conference on Material Processing Methods (ICMPM-2005) during December 12-14, 2005 at Bannariamman Institute of Technology, Sathyamangalm, Tamilnadu.
                                          163. Suresha, B., G. Chandramohan, P. Samapthkumaran, S. Seetharamu, (2006): ‘Mechanical properties Evaluation of Glass Fiber Reinforced Polyester Matrix Composites an Experimental Approach’, National Conference on Recent Trends in Design and Manufacturing Technologies (RTDMT) during March 17-18, 2005 at Kumara Guru College of Technology, Coimbatore, Tamilnadu.
                                          164. Suresha, B., G. Chandramohan, Anil Shiratti, (2006):   ‘An Experimental investigation of Wear of Glass fiber Epoxy Matrix Resin Composite with and without SiCp Filler’, National Level PG Technical Fest -05, during April 29-30, 2005 at NMAM Institute of Technology, Nitte, Karnataka.
                                                                                                                                              Book Chapters
                                                                                                                                              1. Suresha, B., B.N. Ramesh, K. M. Subbaya, and G. Chandramohan, (2011): “Three body abrasive wear behavior with and without graphite filler/ Issues in Materials and Manufacturing Research” Issues in Materials and Manufacturing Research eBook.
                                                                                                                                              2. Suresha, B., Y.S. Varadarajan, and G. Ravichandran,  (2013): “Effect of micro-filler addition on physico- mechanical properties of glass fabric reinforced epoxy composites system/composites and nano composites” in Advances in Materials Science, Apple Academic Press.
                                                                                                                                              3. B. Suresha, R. Hemanth, (2017):“What are microfibrillar and nano fibrillar composites? Basic concepts, characterization and applicationMicro and Nano Fibrillar Composites (MFCs and NFCs) from Polymer Blends 1, 57-72.
                                                                                                                                              4. S. Manoharan, V. Krishnaraj, R. Vijay, D. Linin Singaravelu, B. Suresha, (2018): “Development and characterization of novel fiber reinforced hybrid friction composites” Green Composites-Materials, Manufacturing and Engineering, DeGruyterPreis "Zukunftsgestalter in Bibliotheken 2018" verliehen 2018-06-14.
                                                                                                                                              5. Suresha, Bheemappa, and Rajashekaraiah Hemanth, (2018): “Fabrication and tribological behavior of epoxy hybrid composites” Synthesis and Tribological Applications of Hybrid Materials, First Edition.Wiley‐VCH Verlag GmbH & Co. KGaA.
                                                                                                                                              6. Siva, I., Thirukumaran, M., Jappes, J.T., Suresha, B., Kumar, S.A. and Sunil, B.R, (2018): “Glass fiber hybrid effects in assessing the abrasive wear mechanisms of naturally woven fabric/polymer composites under dry conditions” Synthesis and Tribological Applications of Hybrid Materials, Wiley‐VCH Verlag GmbH & Co. KGaA.
                                                                                                                                              7. B. Suresha, R. Hemanth, Nithin K.S., (2018): “Automotive Applications: Reinforced Material Components” Encyclopedia of Polymer Applications, First Edition, Taylor & Francis.
                                                                                                                                              8. B. Suresha, R. Hemanth andP.A. Udaya Kumar, (2020): “Characterization of mechanical and tribological properties of vinyl esters based hybrid green composites", Khan et al. (Eds.): Hybrid Fiber Composites. Materials, Manufacturing, Process Engineering,  Wiley‐VCH Verlag GmbH & Co. KGaA.
                                                                                                                                              9. Hemanth R and Suresha B, (2020): “Synergism of fillers on adhesive and abrasive wear ofthermoplastic polyester elastomercomposites".  Tribology of Polymer Composites: Characterization, Properties, and applications, Elsevier.
                                                                                                                                              Text Book Engineering Metrology and Measurements, Oxford University Press, 2013,  ISBN: 9780198085492 Journal Publications
                                                                                                                                              1.   Raghuveer H. Desai, Dr. L. Krishnamurthy, T. N. Shridhar, “Areca Short Fiber Reinforced Polylactic Acid (PLA) Composites: Influence of Physical Treatment on Properties”, Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Vol 8, Issue 4, pp 3063-3072, Nov 2019
                                                                                                                                              2. Gururaj R Bhandarkar, Dr. L. Krishnamurthy, D K Srinivasa,  “PLC Programming of an Inline Transfer Machine for the Production of the Core Bush of the Automobile Tyre Valve”, International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181, Vol 7, Issue 10, July 2019, pp 1-3
                                                                                                                                              3. Naveen A, L Krishnamurthy and T N Shridhar, “Investigation and Simulation of Mechanical Properties of W &Al2O3 Thin Films Co-Sputtered on SS304 Substrates”, International Journal of Recent Technology and Engineering (IJRTE)  ISSN: 2277-3878,Volume-8 Issue-1S2, May 2019, pp 150-153.
                                                                                                                                              4. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Fabrication and Performance of Areca Short Fiber Polypropylene Composite at Varying Fiber Loading”, International Journal of Recent Technology and Engineering (IJRTE)  ISSN: 2277-3878,Volume-8 Issue-1S2, May 2019, pp 183-186.
                                                                                                                                              5. Naveen, A., L. Krishnamurthy, & Shridhar, T.N, “Analysis of W-Al2O3 Nanostructured Thin Film Coatings Using DOE Approach”, Journal of Advanced Research in Manufacturing Material Science and Metullurgical Engineering, 2018, Vol 8, issue 1 &2, pp 1-6.
                                                                                                                                              6. Naveen, A., L. Krishnamurthy, & Shridhar, T.N.  “Analysis of Effect of Deposition Parameters on Thickness of Co-sputtered Titanium/Alumina Thin Film Using ANOVA”, Journal of Advanced Research in NanoScience and NanoTechnology, 2018-11-1, Vol 3, issue 1, 1-5.
                                                                                                                                              7. Naveen, A., Krishnamurthy, L., & Shridhar, T. N. (2018, April). “Thickness and surface roughness study of co-sputtered nanostructured alumina/tungsten (Al2O3/W) thin films”, In AIP Conference Proceedings (Vol. 1943, No. 1, p. 020083). AIP Publishing.
                                                                                                                                              8. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Flexural and Impact Characterization of UV Treated Areca Fiber Polypropylene Composites”, International Journal of Mechanical and Production Engineering, Volume- 6, Issue-4, Apr.-2018, http://iraj.in,  pp 68-72.  ISSN(p): 2320-2092, ISSN(e): 2321-2071
                                                                                                                                              9. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Flexural and Impact Characterization of UV Treated Areca Fiber Polypropylene Composites”, International Academy of Science Technology, Engineering and Management IASTEM, 4th -5th , February, 2018 held in Putrajaya, Malaysia. 
                                                                                                                                              10. S A Mohan Krishna, Dr. T N Shridhar, L.Krishnamurthy, “Thermal Analysis of Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites”, International Journal of Digital Publication Technology, Vol, 01, Issue 01, January 2017, 1-8, www.IJDPT.org
                                                                                                                                              11. S A Mohan Krishna, Dr. T N Shridhar, L.Krishnamurthy, “Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites for Thermal Characterization”, International Journal of Digital Publication Technology, Vol, 01, Issue 01, January 2017,1-14,  www.IJDPT.org
                                                                                                                                              12. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy,Characterization and Analysis of Thermomechanical and Thermoelastic Properties for Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites”, International Journal of Engineering Sciences and Management Research, ISSN 2349 – 6193, 3 (3) March 2016, pp. 44-60.
                                                                                                                                              13. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy,Significance and Need of Computational Analysis and Finite Element Modeling for the Investigation of Thermal Behaviour of Composite Materials”,  International Journal of Computational Engineering Research, ISSN 2250 – 3005, February 2016, Vol. 6 issue 2pp. 1-5
                                                                                                                                              14. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Experimental and Computational Approaches to Investigate the Effect of Graphite on Thermal and Mechanical Behaviour in Aluminium-Silicon Carbide-Graphite Composites”, International Journal of Scientific Engineering and Applied Science, ISSN 2395 - 3470, vol. 2, issue 1. January 2016, pp. 4-34. 
                                                                                                                                              15. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Investigation of Heat Flow, Thermal Shock Resistance and Electrical Conductivity of Al 6061-Silicon Carbide-Graphite Hybrid Metal Matrix Composites”, International Journal of Research in Engineering and Science, ISSN 2320 - 9364, Vol 4, Issue 6 June 2016, pp. 48-55.
                                                                                                                                              16. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “An Experimental Investigation and Validation of Thermo-elastic Models on thermal Conductivity Behaviour of Al 6061-Silicon Carbide-Graphite Hybrid Metal Matrix Composites”, International Journal of Scientific Research Engineering and Technology, ISSN 2278 - 0882, Vol. 5, Issue 6, June 2016, pp. 353-367.
                                                                                                                                              17. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Computational Modeling and Relevance of Numerical Convergence for the Investigation of Thermal Expansion Behaviour for Aluminium Matrix Composites”, International Journal of Computational Materials Science and Engineering, ISSN 2047 - 6841, Vol. 4, No. 4, May 2016, pp. 1-27.
                                                                                                                                              18. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Computational Modeling and Mesh Independence Studies for the Investigation of Thermal Conductivity Behaviour for Aluminium Hybrid Composites”, Journal of Mechanical Engineering and Biomechanics, Vol. 1, Issue 1, August 2016, pp. 14-21.
                                                                                                                                              19. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Utility of Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites to Investigate Thermal Properties for Engineering Applications”, International Journal for Research in Emerging Science and Technology, ISSN: 2349 – 761, Vol. 3, Issue 7, July 2016, pp. 21-28.
                                                                                                                                              20. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Microstructural characterization and Investigation of Thermal Conductivity Behaviour of Al 6061 – SiC – Gr Hybrid Metal Matrix Composites”, International Journal of Engineering and Materials Sciences, Vol. 23, Issue 4, August 2016, pp 207-222
                                                                                                                                              21. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Effectiveness of Areca (Betel) Fiber as a Reinforcing Material in Eco-friendly Composites - A Review”, Indian Journal of Advances in Chemical Science S1 (2016) 27-33, Available online at www.ijacskros.com.
                                                                                                                                              22. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Significance of Physical Surface Treatment on Areca Fiber – An Ecological and Economical Process”, International Journal of Modern Engineering Research (IJMER), IJMER, ISSN: 2249–6645, www.ijmer.com, Vol. 6, Iss. 8, August 2016, 79-87
                                                                                                                                              23. Naveen A, L Krishnamurthy, T N Shridhar, “A Review on Thermal Barrier Coatings and its Deposition Techniques”, International Journal of Engineering Sciences & Management Research”, http: // www.ijesmr.com © International Journal of Engineering Sciences & Management Research 3(3): April, 2016, 1-9.
                                                                                                                                              24. Siddharth Joshi, L. Krishnamurthy, G. L. Shekar, “Randomly oriented rectangular shaped structures of CuO on NIO/ITO surfaces”, Advanced Materials Letters, Sweden. DOI: 10.5185/amlett. 2016.6102, Adv. Mater. Lett. 2016, 7(9), 735-742. 
                                                                                                                                              25. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Experimental Investigations on Thermal Analysis and Thermal Characterization of Al 6061-Sic-Gr Hybrid Metal Mattrix Composites”, International Journal of Material Science, Vol. 5, No. 2—September 2015 2226-4523/15/02 054-13 © 2015 DEStech Publications, Inc. doi:10.12783/ijmsci.2015.05022.04, pp 54-66
                                                                                                                                              26. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “Computational investigation on thermal expansivity behavior of Al 6061–SiC–Gr hybrid metal matrix composites”, International Journal of Computational Materials, Science and Engineering, Vol. 4, No. 3 (2015), 1550016, pp 1-21, © Imperial College Press, DOI: 10.1142/S2047684115500165.
                                                                                                                                              27. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “An Experimental Investigation on Specific Heat Capacity and Enthalpy of Al 6061-SiC-Gr Hybrid Metal Matrix Composites using Differential Scanning Calorimetry”, Advanced Materials Research Vol 1105, May  2015 pp 208-214, © (2015) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR. 1105.208
                                                                                                                                              28. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, “An Experimental Investigation on Specific Heat Capacity and Enthalpy of Al 6061-SiC-Gr Hybrid Metal Matrix Composites using Differential Scanning Calorimetry”, The 5th  International conference on Advanced Materials Research, (ICAMR 2015) held at Doha on January 7th -8th , 2015,
                                                                                                                                              29. Srikanth A, Indhu B, L. Krishnamurthy, VPS Naidu, “Photo Scenery for Realistic Scene Generation and Visualization in Flight Gear: A Tutorial”, International Journal of Advanced Research in Electrical and Electronics and Instrumentation Engineering, Volume 3, Special Issue 5, December 2014, pp 510-514.
                                                                                                                                              30. Malatesha S Krishna, Krishnamurthy L, Ajith Kumar G, Prakash K R, “ Part Storage System (Carousel) of VTL by Low Cost Automation”, International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340 (Print): ISSN 0976 – 6359 (Online), Vol 5, Issue 9, September (2014), pp 239-244.
                                                                                                                                              31. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy,An Investigative Review on Thermal Characterization of Hybrid Metal Matrix Composites”, International Journal of Modern Engineering Research (IJMER), Vol. 4, Issue. 8 Aug, 2014,pp 53-62, Version 1 ,ISSN: 2249–6645, OPEN ACCESS
                                                                                                                                              32. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy,Thermal Expansivity Behavior and Determination of Density of Al 6061-Sic-Gr Hybrid Metal Matrix Composites”, International Journal of Modern Engineering Research (IJMER), Vol. 4, Iss. 8 Aug, 2014,Version 4 pp 8-13 ,ISSN: 2249–6645, OPEN ACCESS
                                                                                                                                              33. S. A. Mohan Krishna, Dr. T N Shridhar, Dr. L Krishnamurthy, A Comprehensive Experimental Investigation on Thermal Properties and Characterization of Hybrid Metal Matrix Composites”, International Journal of Recent Scientific Research, Vol. 5, Issue, 9, pp.1589-1594, September, 2014, ISSN: 0976-3031.
                                                                                                                                              34. Shrinath Katti, B.K. Sridhara, L. Krishnamurthy, G.L.Shekar, “Mechanical behaviour of MWCNT filled Polypropylene Thermoplastic Composites”, Indian Journal of Advances in Chemical Science 2 April (2014) 6-8.
                                                                                                                                              35. Siddharth Joshi, Mrunmaya Mudigere, L.  Krishnamurthy, G.L. Shekar, “Growth of horizontal nano pillars of CuO on NiO/ITO surfaces”, Journal of Nanoscience, Volume 2014, Article ID 635308, Aug 2014.
                                                                                                                                              36. Siddharth Joshi, Mrunmaya Mudigere, L.  Krishnamurthy, G.L. Shekar, “Growth and Morphological studies of of NiO/CuO/ZnO based nano-structured thin films for Photovoltaic application”, Chemical Papers, 68, 1584-1592, Nov 2014.
                                                                                                                                              37. R. Madhusudhana, M.A. Sangamesha, R. Gopal Krishne Urs, L. Krishnamurthy, G.L.   Shekar, “Synthesis and Characterization of Zirconia(ZrO2) by simple Sol-Gel Route”, International Journal of Advanced Research (April 2014), Volume 2, Issue 4, 433-436.
                                                                                                                                              38. Chandra Sekhar Kanuru, G.L.Shekar, L. Krishnamurthy, and R. Gopal Krishne Urs,  “Surface Morphological Studies of Solar absorber layer Cu2ZnSnS(CZTS) Thin Films by non-vacuum deposition methods”, Journal of Nano- and Electronic Physics, Vol. 6 No 2, 02004(5pp) June (2014) and is published online.
                                                                                                                                              39. L. Krishnamurthy, G.L. Shekar, D. Abdul Budan, and B.K. Sridhara, “Machinability Assessment of Aluminium-Graphite-Silicon Carbide Hybrid Composites”, Advanced Materials Research Vol. 894 (2014) pp 22-26 © (2014) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMR.894.22.
                                                                                                                                              40. T, N, Shridhar, L. Krishnamurthy, and B.K. Sridhara, “Machinability Studies on Aluminium-Matrix Hybrid Composites”, Advanced Materials Research Vol. 894 (2014) pp 27-31© (2014) Trans Tech Publications,  Switzerland,doi:10.4028/www.scientific.net/AMR.894.27
                                                                                                                                              41. K. Chandra sekhar, Pramod. S. N., L. Krishnamurthy, G. L. Shekar, B. K. Sridhara and     R. Gopal Krishne, "Surface Morphological Studies of Cu2ZnSnS4 (CZTS) Thin Films by Multi Step Electro Deposition Route" in First Indo-Canadian Symposium on Nano-Science and Technology (ICSNST_2013), February. 20-21, 2013, held at The National Institute of Engineering Mysore. pp 130 – 131. 
                                                                                                                                              42. Sandhya K, Chandra Sekhar K, Rohini Nagapadma and L.Krishnamurthy, “Recent advancement on different electrode materials for next generation energy storage devices” Elixir Renewable Energy Engg. 50 (2012) 10576-10580. ISSN 2229-712X.
                                                                                                                                              43. Krishnamurthy, L., Sridhara, B.K. and Abdul Budan, D. (2011) ‘Comparative study on the machinability aspects of aluminium-silicon carbide and aluminium-graphite-silicon carbide hybrid composites’, Int. J. Machining and Machinability of Materials, Vol. 10, Nos. 1/2, pp.137–152.
                                                                                                                                              44. L. Krishnamurthy, Dr. D Abdul Budan, Dr. B.K. Sridhara, “Comparative Study on the Machinability aspects of Aluminium Silicon Carbide and Aluminium Graphite Composites”, Materials and Manufacturing Processes, Taylor and Francis, 22, Issue 7-8, 903-908, 2007.
                                                                                                                                              45. Krishnamurthy, L., Sridhara. B. K., Abdul Budan, D., Page, T. and Arunachalam, S. “Tool Wear Studies on Aluminum Matrix Hybrid Composites”, International Journal for Manufacturing Science and Technology, 11(1), December 2009, pp.5-10, ISBN 1524-1548.
                                                                                                                                              46. Krishnamurthy, L, Sridhara, B. K., Abdul Budan, D., Arunachalam, S. and Page T. “A Series of Tool-Life Studies on Aluminium Matrix Hybrid Composites”, Journal of Future Engineering and Technology. Oct 2009. Vol. 5, No. 1, pp. 26-32, ISSN: 0973-2632.
                                                                                                                                              47. L. Krishnamurthy, Dr.D Abdul Budan, Dr. B.K. Sridhara, “Machinability of Aluminium Hybrid Composites”, International Conference on Recent Trends in Materials and Mechanical Engineering, (ICMME), 18-20, December 2008, held at Dr. Mahalingam College of Engineering and Technology, Pollachi, Tamil Nadu. 
                                                                                                                                              Conference Proceedings
                                                                                                                                              1. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar “Influence of physical modification on Indian originated areca fiber based polypropylene composites: Mechanical and dielectric properties characterization”, AIP Conference Proceedings 2057, 020052 (2019); Published by AIP Publishing, https://doi.org/10.1063/1.5085623 Published Online: 11 January 2019.
                                                                                                                                              2. Naveen A, L Krishnamurthy and T N Shridhar, “Investigation and Simulation of Mechanical  Properties of W &Al2O3 Thin Films Co-Sputtered on SS304 Substrates”, International Conference on Advances in Mechanical Engineering and Management (ICAMEM- 2019), March 22-23, 2019, Vidyavardhaka College of Engineering, Mysuru.
                                                                                                                                              3. Raghuveer H. Desai, L. Krishnamurthy, T. N. Shridhar, “Fabrication and Performance of Areca Short Fiber Polypropylene Composite at Varying Fiber Loading”, International Conference on Advances in Mechanical Engineering and Management (ICAMEM- 2019), March 22-2,3 2019, Vidyavardhaka College of Engineering, Mysuru.
                                                                                                                                              4. Manoj M Koushik,Dr. L Krishnamurthy, “Design Solutions using different Product Design Approaches - A Review”, International Conference on Advances in Mechanical Engineering and Management (ICAMEM- 2019), March 22-2,3 2019, Vidyavardhaka College of Engineering, Mysuru.
                                                                                                                                              5.   Gururaj R Bhandarkar, Dr. L Krishnamurthy,D K Srinivasa, “PLC Programming of an Inline Transfer Machine for the Production of the Core Bush of the Automobile Tyre Valve”, 3rd National Conference on Robotics, Automation, Control and Embedded Systems (NCRACES-2019), 10th May 2019, GSSS Institute of Engineering & Technology for Women, Mysuru.
                                                                                                                                              6. Srikanth A, Indhu B, L. Krishnamurthy, VPS Naidu,  “Photo Scenery for Realistic Scene Generation and Visualization in Flight Gear: A Tutorial”, International Conference on  Emerging Trends in Electrical Systems (ICETES), 15th-16th  December 2014 Dept. of EEE, Mar Athanasius College of Engineering, Kothamangalam, Kerala, India.
                                                                                                                                              7.  Malatesha S Krishna, Krishnamurthy L, Ajith Kumar G, Prakash K R, “ Part Storage System (Carousel) of VTL by Low Cost Automation”, proceedings of the  2nd International Conference on  Current Trends Engineering and Management (ICCTEM), 17-19TH July, 2014 Vidyavardhaka College of Engineering, Mysore, India,   
                                                                                                                                              8. Ganesha.G.P, L. Krishnamurthy, Prakash.S.Kulkarni, “Virtual prototyping method of analysis for Lattice fins design on a generic missile using CFD simulation”, Proceedings of International conference on Innovations and Emerging Trends in Mechanical Engineering, Paper No- T 25, 13th June 2014, Nagarjuna College of Engg and Tech, Bangalore, India,     pp 94-99.
                                                                                                                                              9. Ganesha.G.P, L. Krishnamurthy, Prakash.S.Kulkarni, “Virtual prototyping method of CFD simulation for the analysis of grid fins design”, Conference on Advances in Design, Manufacturing and Management (ADMM’14), held at RV College May 2014, ADMM (2014) MMD-08.
                                                                                                                                              10. Shrinath Katti, B.K. Sridhara, L. Krishnamurthy, G.L.Shekar, “Mechanical Behaviour of MWCNT filled Polypropylene Thermoplastic Composites”, POLYCON-2014, 6th National conference on Advances in Polymeric Materials [Energy, Environment and Health] BCAPM), Mysore, India April 25-26 2014  
                                                                                                                                              11. L. Krishnamurthy, G.L. Shekar, D. Abdul Budan, and B.K. Sridhara, “Machinability “Machinability Assessment of Aluminium-Graphite-Silicon Carbide Hybrid Composites”, The 4th International Conference on Advanced Materials Research (ICAMR 2014) held at Macau, China on January 22-23, 2014.  
                                                                                                                                              12. T, N, Shridhar, L. Krishnamurthy, and B.K. Sridhara, “Machinability Studies on Aluminium-Matrix Hybrid Composites”, The 4th International Conference on Advanced Materials Research (ICAMR 2014) held at Macau, China, on January 22-23, 2014. 
                                                                                                                                              13. L. Krishnamurthy, Dr.D Abdul Budan, Dr. B.K. Sridhara, “Comparative  Study on the Machinability aspects of Aluminium Silicon Carbide and Aluminium Graphite Composites” International  conference on “Advances in Production and Processing of Aluminium” (APPA 2005) held at college of Engineering, University of Bahrain, Kingdom of Bahrain from December 5-7.
                                                                                                                                              14. L. Krishnamurthy, Dr.D Abdul Budan, Dr. B.K. Sridhara, “Machinability Studies on Aluminium Matrix Hybrid Composites”, Sixteenth International conference on  Processing and Fabrication of Advanced Materials, December 17-19, 2007, held at National University of Singapore,  Kent Ridge Guild House, Singapore,  pp 214-227.
                                                                                                                                              15. L. Krishnamurthy, Dr. B.K. Sridhara, “Multilevel Experimental Designs in Machinability Studies”, Proceedings of National Conference on Advanced Trends in Mechanical Engineering Research and Development, MINAC-2000, JNTU College of Engineering, Anantapur, Andhrapradesh, June 22-23, 2000, pp. 240-244.
                                                                                                                                              16. L. Krishnamurthy, Dr. B.K. Sridhara, “Influence of Machinability Parameters on Cutting Temperature of Al - Si Alloy”. Challenges in Product and Development in the Information Era, Proceedings of the 12th ISME Conference, Conference Crescent College of Engineering, Chennai January 10-12, 2001, pp 253-257.
                                                                                                                                              17. L.Krishnamurthy, Dr. B.K. Sridhara, “Machinability Studies on Al-Si alloys Based on Central Composite Design of Experiments”, Proceedings of Conference on Recent Trends in Manufacturing Technology and Management, Adhiyamaan College of Engineering, Hosur, Tamilnadu, January 28-29, 2002, pp. 254-260.
                                                                                                                                              18. B.K.Sridhara L Krishnamurthy et al  “Reliability Evaluation of Complex Electromechanical Systems”, Proceedings of National Conference on Advanced Trends in Mechanical Engineering Research and Development, MINAC-2002, JNTU College of Engineering, Anantapur, Andhrapradesh, December 21, 2002, pp. 840.
                                                                                                                                              19. L. Krishnamurthy, Dr.D Abdul Budan, Dr. B.K. Sridhara, “Turning Characteristics of Aluminium Silicon Carbide Composites”, National Conference on Advances in Engineering Design, April 29-30 2005, Bannari Amman Institute of Technology, Sathyamangalam, Tamil Nadu, pp 705-711
                                                                                                                                              20. L.Krishnamurthy, Dr.D Abdul Budan, Dr. B.K. Sridhara,  “Parametric modeling of Machinablility Studies for Aluminium-Graphite and  Al-Sic Composites”, National Conference on Advances in Materials and Manufacturing Processes (AMMP),  October 5-6, 2007, University BDT College of Engineering, Davanagere, pp 313-317
                                                                                                                                              21. L .Krishnamurthy, D Abdul Budan, B.K. Sridhara, “Machinability Studies on Aluminium Graphite and Aluminium-Graphite-Silicon Carbide Hybrid Composites”, National Conference on New Advances in Thermal, Design, Materials and Manufacturing Engineering (NATDMME – O9) March, 2009, Malnad College of Engineering Hassan.
                                                                                                                                                Poster Presentations
                                                                                                                                                1. K. Chandra Sekhar, G. L. Shekar, L. Krishnamurthy and B. K. Sridhara , “Progress towards Next-Generation of Photovoltaics: A Literature Review”, Advanced Nano-Materials (ANM-2012)  International Conference held at Indian Institute of Technology, Madras from October 17-19, 2012. 
                                                                                                                                                2. K. Chandra Sekhar, S. N. Pramod, L. Krishnamurthy, G. L. Shekar, R. Gopal Krishne Urs and B.K. Sridhara, “Surface Morphological Studies on CZTS Thin Film Photovoltaics by Multistep Electro deposition Route”, Indo-Canadian Symposium on Nano-Science and Technology,   ICSNST-2013 held at the National Institute of Engineering, Mysore from February 20-22, 2013. 
                                                                                                                                                3. S. Joshi, Mrunmaya Mudigere, L. Krishnamurthy G. L. Shekar, “Synthesis and Characterization of an Inorganic Photovoltaics Device using NiO/Cuo/ZnO Composite Materials”, Indo-Canadian Symposium on Nano-Science and Technology’ (ICSNST-2013). 
                                                                                                                                                4. R. Madhusudhana, G.L. Shekar, L. Krishnamurthy, “Synthesis and Characterization of Sol-gel derived ZrO2”, ‘Indo-Canadian Symposium on Nano-Science and Technology’ ICSNST-2013.
                                                                                                                                                • Patents Applied Under IEDC: From 2013-2015
                                                                                                                                                1. First examination report from the Indian Patent Office of the patents applied has been received. The drafting and filing a response to the objections raised is being carried out in the prosecution stage as on May 2020.
                                                                                                                                                Patents applied are:
                                                                                                                                                1. Automation of Subjective Correction of Vision(EC)
                                                                                                                                                2. Development of refractory coating for buildings(CIVIL)
                                                                                                                                                3. Design and fabrication of a kit to supply LPG and BIO-Gas blend for domestic and industrial applications(MECHANICAL)
                                                                                                                                                4. Automatic hand brake system(MECHANICAL)
                                                                                                                                                5. Design and development of a test rig to determine the thermal and oxidation stability of biodiesel(MECHANICAL)
                                                                                                                                                6. Design and fabrication of hybrid bicycle with variable momentum energy recovery and conversion system(MECHANICAL)
                                                                                                                                                7. Replacement of femoral stem in total hip anthroplasty using a novel composite material(MECHANICAL)
                                                                                                                                                8. Development of bagasse ash as refractory material in cement and concrete(CIVIL)
                                                                                                                                                9. Development of masonry blocks manufactured by recycled brick powder stabilized with cement and crumb rubber as an additive(CIVIL)
                                                                                                                                                10. A system and method for a cloud based virtual cooking platform and an automatic cooking device(MECHANICAL)
                                                                                                                                                11. Wind energy conversion system for low wing speed operation using counter rotating generator and vertical axis wind turbine(ELECTRICAL)
                                                                                                                                                12. Development of eco friendly aerobic anaerobic bio digester for railways(CIVIL)
                                                                                                                                                13. Development of portable container used to transport and store perishable vegetables, fruits in healthy condition(ELECTRICAL)
                                                                                                                                                14. Design and development of a bicycle with automatic and continuous variable transmission(MECHANICAL)
                                                                                                                                                1. 6018/CHE/2014-[Our Ref: IP-2047-IN-14150274-NPA-2015]-A SYSTEM AND METHOD  FOR COOKING USING A PROGRAMMABLE COOKING DEVICE
                                                                                                                                                2. Real-Time Remote Laboratory Kit for Engineering Education-Ref. No. PS00002758
                                                                                                                                                   
                                                                                                                                                  1. Patent applied for – “A Device for Switch Over from Biogas to LPG and Vice-Versa and a method There of”, 2015.
                                                                                                                                                  2. Patent applied for – “A System and Method for Measurement of Thermal Stability and Oxidation Stability of Biodiesel”, 2015.
                                                                                                                                                  3. Patent applied for – “A System and Method for Recovery and conversion of Variable Gravitational Potential Energy in Electric Bicycles”, 2015.
                                                                                                                                                   
                                                                                                                                                  • The Automated Hand Brake System