Teqip
TEQIP III
Technical Education Quality Improvement Programme TEQIP Phase – III
The Project, Third phase of Technical Education Quality Improvement Programme (referred to as TEQIP-III) is fully integrated with the Twelfth Five-year Plan objectives for Technical Education as a key component for improving the quality of Engineering Education in existing institutions with a special consideration for Low Income States and Special Category States and support to strengthen few affiliated technical universities to improve their policy, academic and management practices.
Objectives
The Project will focus on the following objectives:
- (a) Improving quality and equity in engineering institutions in focus states viz. 7 Low Income States (LIS1 ), eight states in the North-East of India, three Hill states viz. Himachal Pradesh, Jammu & Kashmir, Uttarakhand and Andaman and Nicobar Islands (a union territory (UT))
- (b) System-level initiatives to strengthen sector governance and performance which include widening the scope of Affiliating Technical Universities (ATUs) to improve their policy, academic and management practices towards affiliated institutions, and
- (c) Twinning Arrangements to Build Capacity and Improve Performance of institutions and ATUs participating in focus states.
Scope
Only the Government and Government aided AICTE approved Engineering institutions/Engineering faculty/Engineering Teaching Department/Constituent Institutions of Universities/Deemed to be Universities and new centrally funded institutions in SCS will be the part of the project. An estimated 200 Government and Government funded Engineering institutions including Affiliating Technical Universities (ATUs) will be selected under different sub-components in one or two cycles.
Project Strategy
The project will be implemented in alignment with the 12th Five Year Plan (2012- 17), based on faster, sustainable, and inclusive growth. It emphasizes increasing the supply of highly-skilled workers to drive the economy, as well as helping low income states catch up with their more advanced neighbours. The Project will be implemented through the Ministry of Human Resource Development (MHRD) of the Government of India as a Central Sector Scheme (CSS), wherein 100% funds will be provided as grants to the States, Institutions& ATUs.
TEQIP III is fully integrated with the Twelfth Five-Year Plan objectives for Technical Education and MHRD, Govt of India as a key component for:
- Improving the quality of Engineering Education in existing institution with a special consideration for low Income states and Special category states.
- Support to strengthen few affiliated technical university to improve their policy, academic and management practices.
- Twinning Arrangements to build capacity and improve performance of institution and ATUs participating in focus states.
- TEQIP-III: Quotation are invited for procurement of Equipment: Colour Printer Multi Function Qty- 1. Last date for submission of Quotation : 19-March-2020, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Printer B / W Qty- 1. Last date for submission of Quotation : 19-March-2020, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Computer Systems Qty- 20. Last date for submission of Quotation : 19-March-2020, 17:30 hours.
- TEQIP- III : Extension of last date for quotation submission.
- TEQIP-III: Quotation are invited for procurement of Equipment: AI-Server box. Last date for submission of Quotation : 13-December-2019, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Note Book, Qty- 4. Last date for submission of Quotation : 14-June-2019, 17:30 hours.
- TEQIP-III : Extension of last date for quotation submission.
- TEQIP-III: Quotation are invited for procurement of Equipment: V-Box, J-Ring, L-Box, and U-Box and Slump cone with attachments, Qty- 1. Last date for submission of Quotation : 28-Jan-2019, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Pullout testing equipment, Qty- 1. Last date for submission of Quotation : 28-Jan-2019, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Communication Kit -2, Qty- 2 each. Last date for submission of Quotation : 28-Jan-2019, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Physics Lab Equipments, Qty- 4 each. Last date for submission of Quotation : 28-Jan-2019, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Permeameter and Current Meter, Qty- 1 each. Last date for submission of Quotation : 28-Jan-2019, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Curing Tank, Qty- 1. Last date for submission of Quotation : 28-Jan-2019, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Concrete Mixer, Qty- 1 ; Mortar Mixer electrically operated, Qty - 1. Last date for submission of Quotation : 28-Jan-2019, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Chemistry Laboratory Equipment's, Qty- 1 each. Last date for submission of Quotation : 28-Jan-2019, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: 3D Scanner, Qty- 1. Last date for submission of Quotation : 28-Jan-2019, 17:30 hours.
- TEQIP-III : Extension of last date for quotation submission.
- TEQIP-III: Quotation are invited for procurement of Equipment: Travelling Microscopes -T type, Qty- 4. Last date for submission of Quotation : 27-Oct-2018, 14:00 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Travelling Microscopes- Pi, Qty- 4. Last date for submission of Quotation : 27-Oct-2018, 14:00 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Spectrometer, Qty- 4. Last date for submission of Quotation : 27-Oct-2018, 14:00 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Charging and Discharging of Capacitors, Qty- 4. Last date for submission of Quotation : 27-Oct-2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Semi Automatic Pug Cutting Machine, Qty- 1. Last date for submission of Quotation : 27-Oct-2018, 14:00 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: 3D Scanner, Qty- 1. Last date for submission of Quotation : 27-Oct-2018, 14:00 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: 3D Printer, Qty- 1. Last date for submission of Quotation : 27-Oct-2018, 14:00 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Chemistry Laboratory Equipments – Qty: 1 each. Last date for submission of Quotation : 27-Oct-2018, 14:00 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment: Spin Coater, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment:Flow meter/ Discharge meter, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment:CAD & DM Software, Qty- 20 users. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Universal Testing Machines, Qty- 1 each. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment:Data Acquisition System, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Rebound hammer, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Proving Ring, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment:Pullout testing equipment, Qty- 1 each. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment:Flexural Attachment, Qty- 1 No.. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Digital tile flexural testing machine, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Lateral Extensometer and Longitudinal Compressometer, Qty- 1 each. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Permeameter and Current Meter, Qty- 1 each. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Metrology Lab Equipments. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Flow meter/ Discharge meter, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Digital Balance, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Curing Tank, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Crack Measuring Device, Qty- 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment: Concrete Mixer, Qty- 1 ; Mortar Mixer electrically operated, Qty - 1. Last date for submission of Quotation : 21st September 2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Travelling Microscope, Qty- 4 each. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Spin Coater, Qty- 1. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Wireless Network Equipments. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Workstation, Qty- 2. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Permeameter and Current Meter, Qty- 1 each. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Metrology Lab Equipments. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Flow meter/ Discharge meter, Qty- 1. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Digital Balance, Qty- 1. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Curing Tank, Qty- 1. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Crack Measuring Device, Qty- 1. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Concrete Mixer, Qty- 1 ; Mortar Mixer electrically operated, Qty - 1. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Computer Server, Quantity -1 nos. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Communication Kit -2, Qty- 2 each. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment –Communication Kit -1, Qty- 2 each. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Chemistry Laboratory Equipments, Qty- 1 each. Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Analog Discovery Kit, Qty- 4– Last date for submission of Quotation : 24-Aug-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – High End Workstation, Qty- 1– Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment –Permeameter and Current Meter, Qty- 1 each – Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment –Hot Air Oven (Digital), Qty- 1 – Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment –Flow meter/ Discharge meter, Qty- 1 – Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment –Digital Balance, Qty- 1 – Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment –Curing Tank, Qty- 1 – Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment –Crack Measuring Device, Qty- 1 – Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment – Concrete Mixer, Qty- 1 ; Mortar Mixer electrically operated, Qty - 1– Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment – Desktop Computers, Qty- 70– Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment – Civil Lab Equipments, Qty- 1– Last date for submission of Quotation : 23-July-2018, 17:30 hours.
- TEQIP-III: Quotation are invited for procurement of Equipment – Spectrum Analyzer - Qty-1– Last date for submission of Quotation : 06-June-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Wireless Network Equipments– Last date for submission of Quotation : 06-June-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Workstation, Qty- 2– Last date for submission of Quotation : 06-June-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Advanced Toolmakers Microscope and Bevel Protractor– Last date for submission of Quotation : 06-June-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Measurement Lab Equipments, Qty - 1 each– Last date for submission of Quotation : 06-June-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Data Acquisition System - Qty-1– Last date for submission of Quotation : 06-June-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Analog Discovery Kit, Qty- 4 – Last date for submission of Quotation : 06-June-2018, 17:30 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Power Electronics Lab Equipments, Quantity -1 each– Last date for submission of Quotation : 5th May, 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – IOT kit, Quantity -10 each– Last date for submission of Quotation : 5th May, 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Four Ball Tester- Qty-1no– Last date for submission of Quotation : 5th May, 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Digital Storage Oscilloscope, Quantity -1no.– Last date for submission of Quotation : 5th May, 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Drilling Machine and Lathe Machine, Quantity -1 each.– Last date for submission of Quotation : 5th May, 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Computerized Roundness Tester, Quantity -1no.– Last date for submission of Quotation : 5th May, 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Computer Server, Quantity -1 no.– Last date for submission of Quotation : 5th May, 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Computers, Quantity -100 nos.– Last date for submission of Quotation : 21st April 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Fume Hood and Thermal Evaporation Unit – Quantity – 1 each– Last date for submission of Quotation : 21st April 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment –Marvelmind Indoor Navigation System – Starter Kit Quantity – 1 no – Last date for submission of Quotation : 21st April 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Advanced Toolmakers Microscope- 1 no and Bevel Protractor – 3 nos – Last date for submission of Quotation : 21st April 2018, 14:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Control Systems Equipments – Last date for submission of Quotation : 12th March 2018, 17:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – DSP Trainer Kit – Last date for submission of Quotation : 12th March 2018, 17:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment – Circuits and Measurement Equipments – Last date for submission of Quotation : 12th March 2018, 17:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment - Laptop - Last date for submission of Quotation : 1st March, 2018, 17:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment - Drilling Machine and Lathe Machine - Last date for submission of Quotation : 1st March, 2018, 17:00 hours
- TEQIP-III: Quotation are invited for procurement of Equipment - Computer Server & IOT kit - Last date for submission of Quotation : 19th February, 2018, 17:00 hours
Request for Expression of Interest- NIE GATE Training Program.
You are invited to submit your Expression of Interest for conducting GATE Training Program for NIE students to prepare for GATE 2019.
The details of our requirement are enclosed for your information. You are requested to deliver your Expression of Interest to the address given below so as to reach us on or before 14th May 2018 in sealed cover superscribed as “EOI for NIE Gate Training Program”.
The Principal (TEQIP-III),
The National Institute of Engineering Manandavadi Road, Mysuru-570008
EOI should be submitted invariably in the format enclosed (Applicant’s Expression of Interest) along with all the documents requested. Kindly follow the below given links for:
a. Terms of Reference: GATE Training Program
We look forward to receiving your EOI and thank you for your interest in this project
Activities
- Brochure & Registration form :Two day workshop on “Challenges in Measurement of Flow in Streams and Other Open Channels”, on April 27- 28, 2018 organized by Dept of Civil Engg
- Invitation:One day State level Student Technical Symposium on “INPHASE – 2018″, on April 17, 2018 organized by Dept of E&E
- Invitation :Two day workshop on “Digital Manufacturing”, on April 12-13, 2018 organized by Dept of IP & Engg
- Two days National Conference on “Communication, Signal Processing, IoT, Networking and Embedded Application (NCCOSINE – 18)” on 17th and 18th May 2018, dept of E&C.
- One day State level Student Technical Symposium on “INPHASE – 2018″, on April 17, 2018 organized by Dept of E&E. Last date for the submission of paper extended to 13th April 2018.
- Invitation:One day workshop on “LATEX – for document preparation”, on 10.4.18 oraganized by Dept of Physics & Maths.
- Invitation & Program Schedule : Two day workshop on “Real time Simulation using OPAL-RT Technologies”, on 21.3.18 & 22.3.18 organized by Dept of E&E.
- Three days SDP on “Building Dynamic Web Apps using AngularJS” on March 1 – 3, 2018, organized by Computer Science Division.
- Invitation and Program brochure : “National Science Day ” on February 28, 2018 , organized by Departments of Basic Science.
- Invitation and Program brochure : Two days Workshop on “Current Trends in Big Data Analytics and Cloud Computing” on February 23 –24, 2018, organized by Computer Science Division.
- Three day FDP on “Machine Learning “, on March 1-3, 2018 organized by Dept of E&C.
- Departments of Basic Science celebrates “National Science Day ” on February 28, 2018.
- One week programme on “Instructional Design and Delivery” on January 1-5, 2018 , organized by Computer Science Division.
- Invitation : One day workshop on “Network Simulation “, Saturday 9th December 2017 organized by Dept of IS&Engg
- Invitation : Two days FDP on “Wireless Sensor Networks and IOT “, - 2.11.17 & 3.11.17 organized by Dept of E&C.
- Two days FDP on “Wireless Sensor Networks and IOT “, - 2.11.17 & 3.11.17 organized by Dept of E&C.